NetCOBOL for SPARC Architecture SAF Subroutines User's Guide

Application example:
[a.htm (Web page prototype file)]
:
Name: //COBOL//GET-NAME//COBOL//
:
[COBOL program]
Chapter 3. How to Use SAF Subroutines 31
:
* Specifying a name
MOVE “GET-NAME” TO COBW3-CNV-NAME.
MOVE “FUJITSU TARO” TO COBW3-CNV-VALUE.
* Specifying conversion data to be repeated in the Wed page for
* processing result output (prototype file)
CALL “COBW3_SET_CNV” USING COBW3
:
* Specifying the file name of the Web page for processing result
* output (prototype file)
MOVE “a.htm” TO COBW3-HTML-FILENAME.
* Outputting the Web page for processing result output (prototype
* file)
CALL “COBW3_PUT_HTML” USING COBW3
:
[Output result on the WWW browser]
:
Name: FUJITSU TARO
:
Specification of a Repetition Range in the Web Page Prototype File:
Write "//COBOL_REPEAT_START//" and "//COBOL_REPEAT_END//" before and after
a part in the Web page prototype file to specify that the part should be repeated.
The number of times of repetition is identical to the number of registered repetitive
character strings to be converted.
• Beginning of the repetition range
Write "//COBOL_REPEAT_START//" at the beginning of the range.
• Repetition data
Write data to be output repeatedly. If data should be converted when the Web
application is executed, specify conversion names.
If a different conversion character string should be output in each separate
repetition cycle, write "//COBOL_REPEAT//" before and after each conversion
name. If a separate conversion character string should be output in every
repetition, write "//COBOL//" before and after conversion name.