2012 FIM Technical Rules Motocross

More documents

Recommendations

Info

01.70 RECOGNISED INTERNATIONAL HELMET APPROVAL MARKS • Europe ECE 22-05 (P ou J) • Japan JIS T 8133: 2007 • USA SNELL M 2010 (see International Helmet Standards in diagram section) 01.71 EYE PROTECTION For the main article, refer to the same number in the General section. 01.73 NATIONAL COLOURS FOR HELMETS For the main article, refer to the same number in the General section. 01.75 BADGE OF THE FIM For the main article, refer to the same number in the General section. 01.76 NUMBER SASHES (BIBS) Starting numbers to be worn on sashes (bibs) or printed on the riders’ jersey must be conforming to the following: 76.01 The colour of the number must be in strong contrast with the colour of the background. 76.02 Distance between the numbers: 1.5 cm 76.03 Height of number: minimum 20 cm 76.04 Width of number: minimum 10 cm for one digit numbers minimum 20 cm for two digit numbers minimum 25 cm for three digit numbers 68 CMS
76.05 Width of stroke: 3 cm 76.06 Minimum free space around the number without publicity: 5 cm 76.07 Bibs if manufactured from plastic material must be perforated to provide adequate ventilation. 76.08 Starting numbers used by riders on number sashes or tee-shirts must be in compliance with the starting number of the race in question. Furthermore they must be worn during the practices as well as during the races. 01.77 CONTROL 77.01 Verification General A rider is at all times responsible for his machine. For the main article, refer to the same number in the General section 77.02.2 The rider or mechanic must present clean motorcycles in conformity with the FIM rules. He must also present a duly filled in and confirmed technical card. The fuel tank shall only contain maximum 0.5 litre fuel. In case of doubt, the Chief Technical Steward will measure the weight with an empty tank. 77.02.3 The rider must present his equipment. The helmet must be marked. 77.02.5 The sound test must be carried out first and the sound level reached will be recorded in the technical card. The exhaust silencer will be marked with paint. 77.02.6 The motorcycle(s) must be weighed and the weight recorded in the technical card. 69 CMS
Page 2 and 3:
Technical Rules General Section Rè
Page 4 and 5:
01.77 CONTROL .....................
Page 6 and 7:
Group B1 Vehicles with three wheels
Page 8 and 9:
11.15 Wankel system For Wankel syst
Page 10 and 11:
25.01 The use of titanium in the co
Page 12 and 13:
31.04 On a Sidecar machine the exha
Page 14 and 15:
01.39 FOOTRESTS For specific detail
Page 16 and 17:
50.02.1 Race Procedures (Race proce
Page 18 and 19:
50.03.3 Handlebars For specific ref
Page 20 and 21: IMPORTANT: As a condition of entry,
Page 22 and 23: Low power accumulators provided for
Page 24 and 25: The accumulator installation must e
Page 26 and 27: 01.55 NUMBER PLATES For specific de
Page 28 and 29: Lead replacement petrols, although
Page 30 and 31: Gas chromatography (GC) is an analy
Page 32 and 33: FlM WORLD CHAMPIONSHIPS AND PRIZE E
Page 34 and 35: All helmets must be marked with one
Page 36 and 37: Canada CMA White and 3 Red Maple le
Page 38 and 39: 77.01.4 Technical inspections will
Page 40 and 41: THE 2 METER MAX METHOD - IN FOCUS L
Page 42 and 43: • For Quad vehicles with exhaust
Page 44 and 45: Throttle THE IMAGE OF THE SOUND MEA
Page 46 and 47: 01.80 GUIDELINES FOR USE OF SOUND L
Page 48 and 49: Junior MX (2012) 2 metre max method
Page 50 and 51: NUMBERS / NUMEROS 48 O
Page 53 and 54: INTERNATIONAL HELMETS ber of the ST
Page 55 and 56: TECHNICAL RULES FOR MOTOCROSS (CMS)
Page 57 and 58: 01.01 INTRODUCTION For the main art
Page 59 and 60: 01.19 MOTORCYCLE WEIGHTS Weights of
Page 61 and 62: 01.37 THROTTLE CONTROLS Snowmobiles
Page 63 and 64: 01.49 TYRES FOR MOTOCROSS 49.02 Sco
Page 65 and 66: For the solo classes of the Individ
Page 67 and 68: • the side number plates: the ent
Page 69: For Supermoto Riders must wear a co
Page 73 and 74: 77.02.14 If a motorcycle is involve
Page 75 and 76: With the FIM ‘static’ test meth
Page 77 and 78: 01.82 SPECIFICATIONS FOR SNOWMOBILE
Page 79 and 80: 82.13 Driving tracks These must be
Page 81 and 82: On the rear, the vehicle must have
Page 83 and 84: MOTOCROSS 81 E
Page 86 and 87: NUMBERS / NUMEROS O FIM WORLD CHAMP
Page 88 and 89: SNOWMOBILE SCOOTER/NEIGE 86 M CMS
Page 90: 88 CMS
show all

2012 FIM Technical Rules Motocross

Create successful ePaper yourself

Delete template?

Save as template?