2012 FIM Technical Rules Motocross
2012 FIM Technical Rules Motocross
2012 FIM Technical Rules Motocross
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
76.05<br />
Width of stroke: 3 cm<br />
76.06<br />
Minimum free space around the number without publicity: 5 cm<br />
76.07<br />
Bibs if manufactured from plastic material must be perforated to provide adequate<br />
ventilation.<br />
76.08<br />
Starting numbers used by riders on number sashes or tee-shirts must be in<br />
compliance with the starting number of the race in question. Furthermore they<br />
must be worn during the practices as well as during the races.<br />
01.77 CONTROL<br />
77.01 Verification<br />
General<br />
A rider is at all times responsible for his machine.<br />
For the main article, refer to the same number in the General section<br />
77.02.2 The rider or mechanic must present clean motorcycles in conformity<br />
with the <strong>FIM</strong> rules. He must also present a duly filled in and confirmed technical<br />
card. The fuel tank shall only contain maximum 0.5 litre fuel. In case of doubt, the<br />
Chief <strong>Technical</strong> Steward will measure the weight with an empty tank.<br />
77.02.3 The rider must present his equipment. The helmet must be marked.<br />
77.02.5 The sound test must be carried out first and the sound level reached<br />
will be recorded in the technical card. The exhaust silencer will be marked with<br />
paint.<br />
77.02.6 The motorcycle(s) must be weighed and the weight recorded in the<br />
technical card.<br />
69<br />
CMS
Change language