Power Analysers & Recorders cont'd. - Ferret

GENERAL INDUSTRIAL & PROCESS MEASUREMENT
Industrial Process Calibrators cont’d.
Fluke 690Bar Pressure Transducer to suit
Calibrators 744 & 725
FLU,700P31-690BAR (4724) AU
For use with the Fluke 744 & &25 industrial
calibrators. Range 100 to 690kPa, reference
uncertainty .025%. Connection 1/4NPT and 1/4 ISO
Includes 700LTP-1 pressure pump.
Fluke 7Bar Pressure Transducer & Pump to suit FLU,744 & FLU,725
FLU,700PD6-7BAR (4722) AU
For use with the Fluke 744 & &25 industrial calibrators. Range 100 to 690kPa,
reference uncertainty .025%. Connection 1/4NPT and 1/4 ISO Includes
700LTP-1 pressure pump.
Fluke 700S/W-DPC-TRACK Software for 744 Process Calibrator
FLU,700S/W-DPC-TRACK (4720) AU
Provides means of building and maintaining an instrumentation maintenance
database for Fluke 743B & 744 Documenting Process Calibrators.
Fluke 718 300G Pressure Calibrator
FLU,718-300G (4761) AU
Pressure source and milliamp measurement. Pressure
specs -83 to 2068kPa ±0.05% of range. Max pressure
2.6MPa. Current specs: 0.0001mA resolution, accuracy
0.015%. Calibrate P/I (pressure to current) transmitters,
measures pressure via a 1/8 inch NPT pressure fitting
and an internal pressure sensor, source pressure,
measure current up to 24mA, simultaneously display
pressure and current measurements, supplies loop
voltage, calculates percentage in percent mode,
calculates mA error in percent error mode.
Fluke 719 2Bar-30G Pressure Calibrator including Electric Pump
FLU,719-30G (4763) AU
2Bar, includes pump and precision 4 to 20mA measurement and source
capability. The pump in this instrument is electric. Uncertainty 0.025%.
Precision pressure adjustment vernier. Range -850mBar to 2Bar. Resolution
1mBar. 4 to 20mA resolution .001mA .015%rdg + 2 counts.
Fluke Pressure Calibrator 8Bar Includes
Electric Pump
FLU,719-100G (4762) AU
8Bar, includes pump and precision 4 to 20mA measurement
and source capability. The pump in this instrument is
electric. Uncertainty 0.025%. Precision pressure
adjustment vernier. Range -850mBar to 8Bar. Resolution
1mBar. 4 to 20mA resolution 0.001mA 0.015%rdg + 2
counts.
Fluke 725 Process Calibrator
FLU,725-NATA (4719) AU
FLU,725 MY
DC voltage measurement 0.025%, 300V max, source
0.02%, 11V max. DC current measurement 0.025%,
110mA max, source 0.01%, 22mA max. Resistance
50kHz, source 1 count 20Hz to 5kHz. ‘K’ thermocouple
measurement 0.3ºC, source 0.3ºC. Pt100 RTD
measurement 0.5ºC, source 0.2ºC. Measures and
simulates 4 to 20mA, t/c E,N, J, K, T, B, R, S, & C, 2,
3 & 4 wire RTDs and frequency. Operates from drycell
batteries. (Includes NATA calibration - AU).
50
www.techrentals.com.au
Industrial Process Calibrators cont’d.
Fluke 743 Calibrator
FLU,743B MY
Includes RS232 interface. DC voltage measurement 0.025%, 300V max,
source 0.01%, 15V max. DC current measurement 0.025%, 110mA max,
1 count 20Hz to 5kHz. ‘K’ thermocouple measurement 0.3ºC, source 0.3ºC
Pt100. RTDs measurement 0.3ºC, source 0.1ºC. Measures and simulates 4
to 20mA, t/c E, N, J, K, T, B, R, S, & C, 2, 3 & 4 wire RTDs, frequency, test
limit switches. Can use scaling factors for measurement & source. Built in
calculator. Autostep function. Allows user entered values. Operates as an 8k
point data logger. Note PC software only supports 15 tags.
Fluke 744 DOC Calibrator with Hart
FLU,744 (4725) AU/MY
Documenting process calibrator which includes HART communication
protocols for communicating with and setting up smart transmitters. RS232
interface. DC voltage measurement 0.025%, 300V max, source 0.01%, 15V
max. DC current measurement 0.025%, 110mA max, source 0.01% 22mA max.
Resistance measurement 0.05%, 11kOhm max, source 0.01% 11kOhm max.
Frequency measurement 0.5%, +5, 40~500Hz, source 1 count 20~5kHz. ‘K’
thermocouple measurement 0.3ºC, source 0.3ºC Pt100. RTDs measurement
0.3ºC, source 0.1ºC. Measures and simulates 4~20mA, t/c E, N, J, K, T, B, R,
S & C, 2, 3 & 4 wire RTDs, frequency, test limit switches. Uses scaling factors
for measurement & source. Built in calculator. Autostep function. Allows user
entered values. Operates as an 8k point data logger. Note PC software only
supports 15 tags.
Fluke 773 Milliamp Process Clamp Meter
FLU,773 (4751) AU
Measure 4 to 20mA control lines, PLC loops, transmitters
or any 4 to 20mA line without breaking the loop. Capable
of 0 to 20.99mA and 24 to 100mA with clamp. Source
and simulate mA and voltage signals in circuit. 4 to 20mA
scaled o/p.
Fluke 789 Process Meter
FLU,789 PROCESSMETER (4718) AU
Standard multimeter functions with 2 to 20mA sink and source capability,
including a 24V supply. HART 250 resistor, 20mA drive into 1,200.
Simultaneous mA and % of scale readout on mA output. 25% manual step
plus auto step and auto ramp on mA output. Min/max/average/hold/relative
modes. Double size dual display. Accuracy, VDC 0.1% +1, VAC 0.7% +2, mA
DC 0.05% +2, frequency 0.005% +1.
Halstrup KAL84 0-1kPa Portable
Pressure Calibrator
HAL,KAL84 (4792) AU
Portable battery operated 0-1kPa (0-10mBar)
low pressure calibrator. Linearity ±0.5% ±1
digit, hysteresis 0.1%, medium - air and all non
aggressive gases, pressure connections 6.5mm hose NW5, interior tubing
5mmØ. Analogue output 0 to 1V, display 4.5 digit, power supply via mains
adaptor 100 to 240VAC & NiCd rechargable battery pack.
Jofra DPC-500 Documenting Pressure
Calibrator 1000Bar NATA
JOF,DPC-1000-NATA (4782) AU
Documenting pressure calibrator is used for
high precision calibration of pressure gauges,
pressure transmitters, digital manometers,
pressure switches, overpressure protection valves
etc. Measure pressure at 1,000Bar or 14,500psi, voltage 0 to 10V, current
0 to 20mA and 4 to 20mA, and supplies 24VDC as source for transmitters.
Accuracy ±0.025% F.S. Supplied with Druck PV212 1000Bar hand pump
and calibration software. 15 user selectable engineering units including user
defined. Nata Calibrated.