MAX S405 HD PLUS - FTE Maximal

More documents

Recommendations

Info

ENGLISH OSD 87 OSD 88 OSD 89 OSD 90 TOOLS 6.3. FACTORY DEFAULT When you press [OK] on the “Default Value” item: 1. A dialogue box will occur where you need to enter the password. 2. After you input the correct password a warning message will be displayed like the one beside (OSD 87). 3. If you select “Yes” then all changes you made will be reset to default values. Make sure you really want to do this! 4. Press [Exit] in both steps will close the window without resetting the receiver. 6.4. SOFTWARE UPGRADE It is possible to make the updating of the receiver by the means of satellite (OTA) or by the means of USB port, and it is also possible to make a backup of the information of the receiver in the USB device, connected as you can see in OSD 88. 6.4.1. UPGRADE BY USB This option allows updating the software of the receiver with the received data from a USB memory device. To do it, connect a USB memory device to the receiver and accede to this menu option (OSD 89). The last software version to be loaded must be placed at the root path of your USB device. 1. Upgrade mode: Select with [ ], the mode of upgrading. 2. Update file: Select with [ ], the name of the file to be loaded. 3. Select “Start” and press [OK]. An alert message appears indicating not to take out the memory device during the loading process. 4. Once the file has been loaded, it requires the conformity to end the upgrading process, writing into the receiver the upgrading. Press [OK] to upgrade the receiver (OSD 90). In case during the reading of the file, it is corrupted or it would be a not appropriated for this model of receiver, an alert message would appear “Error reading the USB disk”. 5. After pressing [OK] the receiver will write into the Flash memory, and it will reboot to end the upgrading process. For further information about the upgrading of the receivers, please visit http://www.ftemaximal.com, in the chapter about upgrading receivers. PAG. 38 rev 1.2
ev 1.2 OSD 91 OSD 92 OSD 93 TOOLS 6.4.2. BACKUP TO USB This option allows saving information of the receiver in the USB device. Options: Software or channels and the current configuration (OSD 91). Once you have selected the type of information that you want to export to the USB device, select “start” and press [OK] in order to save the data. 6.4.3. UPGRADE BY SATELLITE This function can upgrade the software of your receiver through data sent by a satellite. At the moment we offer satellite updates only through ASTRA1 satellite. 1. Select the satellite and TP or input the TP value and download PID. 2. Then mark “Start” and press [Enter] to begin the download of the upgrade (OSD 92). This may need up to 60 Minutes. Therefore we suggest using of this function only if you don’t intent to watch TV during this time. At the moment of writing this manual, the data for the software upgrade by Satellite is: •Satellite: Astra •TP Frequency: 12604 MHz. •Symbol Rate: 22000 •Polarity: Horizontal •Download PID: 1294 “Auto OTA Config” option will allow activating the updating mode by OTA automatically. Options: Auto, off or confirm (OSD 93). -Auto: It will make the updating automatically. -Off: It will not make the update. -Confirm: It will request the user’s confirmation to start the updating. In order to configure the parameters concerning the automatic updating, you have to access to the Programmer option. For changes in the data of the satellite please visit http://www. ftemaximal.com . PAG. 39 ENGLISH
Page 1 and 2: MAX S405 HD PLUS
Page 3 and 4: ev 1.2 QUICK INSTALLATION GUIDE In
Page 5 and 6: ev 1.2 IMAGE 2 IMAGE 3 QUICK INSTAL
Page 7 and 8: ev 1.2 IMAGE 5 QUICK INSTALLATION G
Page 9 and 10: ev 1.2 QUICK INSTALLATION GUIDE Lan
Page 11 and 12: ev 1.2 INDEX 3.3.1. Start-up Channe
Page 13 and 14: ev 1.2 PANEL & REMOTE CONTROL DESCR
Page 15 and 16: ev 1.2 OSD 1 BASIC OPERATIONS PAG.
Page 17 and 18: ev 1.2 OSD 5 OSD 6 OSD 7 OSD 8 BASI
Page 19 and 20: ev 1.2 OSD 14 OSD 15 OSD 16 OSD 17
Page 25 and 26: ev 1.2 OSD 41 OSD 42 CHANNEL 3.5. D
Page 31 and 32: ev 1.2 OSD 65 OSD 66 OSD 67 SYSTEM
Page 37: ev 1.2 OSD 83 OSD 84 OSD 85 OSD 86
Page 43 and 44: ev 1.2 OSD 105 OSD 106 OSD 107 OSD
Page 45 and 46: ev 1.2 OSD 114 OSD 115 DVR MANAGEME
Page 47 and 48: ev 1.2 VIDEO Decoding Bit rate Aspe
Page 49: ESPAÑA Mogoda, 110 Pol. Industrial

MAX S405 HD PLUS - FTE Maximal

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?