16.10.2013 Views

iCharger 306B Manual - RC Station CH

iCharger 306B Manual - RC Station CH

iCharger 306B Manual - RC Station CH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>iCharger</strong> Synchronous Balance Charger/Discharger <strong>306B</strong><br />

General Status information<br />

General Status Information Voltage of Balance Port<br />

Warning and error in formation<br />

The <strong>iCharger</strong> incorporates a wide range of protection and alarm functions to monitor the operation of the<br />

charger. This includes verifying the internal state and the condition of its electronics. In the case of any error<br />

being detected the screen displays the error cause and the charger generates 3 beeps. If the error occurs<br />

during a charging, discharging or cycling process the error message and termination data will appear<br />

alternately.<br />

Termination at<br />

-01245mAh 01h:32<br />

Termination<br />

power<br />

Dec<br />

End Voltage<br />

16.80V<br />

Dec<br />

Capacity Cut-Off<br />

ON 5000mAh<br />

Dec<br />

Safety timer<br />

ON 120min<br />

Dec<br />

Temp Cut-Off<br />

OFF 50℃<br />

Dec<br />

Ext.Temp 30℃<br />

Int.Temp 40℃<br />

Dec<br />

Input power 3A<br />

Voltage 11.80V<br />

Note: Toggle back to the last<br />

viewed parameter via the Dec<br />

button, press Dec again to<br />

move to the next parameter.<br />

Termination<br />

time<br />

Start/Enter<br />

>3 seconds<br />

Change the<br />

value<br />

Start/Enter<br />

>3 seconds<br />

Change the<br />

value<br />

Start/Enter<br />

>3 seconds<br />

Change the<br />

value<br />

When an error has been reported press Batt type/Stop to return to the<br />

main menu. Press Inc or Dec to check the parameter value related to<br />

the error. For example in the case of a temperature error you can check the<br />

temperature that triggered the error. Press Start/Enter to return to the error<br />

message screen. Expression ―-‖ refers to the discharged capacity to packs<br />

-27-<br />

Inc<br />

1:4.01 4.03 4.07<br />

4:4.02 4.05 4.04<br />

Cycle Information<br />

Inc<br />

<strong>CH</strong>G 1 00213mAh<br />

D<strong>CH</strong>G 1 00199mAh<br />

Inc<br />

<strong>CH</strong>G 2 00203mAh<br />

D<strong>CH</strong>G 2 00197mAh<br />

。。。

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!