You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Driving basics<br />
TR0304<br />
Starting the vehicle<br />
1:03AM<br />
PIN While Code starting, Chang foot<br />
braked<br />
brake must be pressed<br />
<br />
ID:881 Data:0x00000002<br />
EST.<br />
Follow these steps to prepare the vehicle for<br />
driving:<br />
1. Tesla recommends selecting the N gear<br />
position.<br />
2. Press and hold down the brake pedal.<br />
3. Insert the key into the starter switch, turn<br />
it to the START position, and release.<br />
When released, the key automatically<br />
returns to the ON position and, if the<br />
start-up sequence is successful, the N<br />
indicator will illuminate green and you’ll<br />
hear an audible tone. .<br />
Note: If the brake pedal is not pressed, a<br />
message is displayed on the Touch<br />
Screen. Press the brake pedal and turn<br />
the key to the START position again.<br />
The vehicle is now ready to be driven.<br />
Selecting gears<br />
The transmission has two selectable drive<br />
positions - forward (D) and reverse (R). In the<br />
neutral (N) position the gear selector rests<br />
between gears D and R.<br />
TR0008<br />
Indicator lights in the instrument panel<br />
illuminate to show the currently engaged<br />
gear.<br />
The vehicle can be driven away from<br />
stationary with the gear selector in position D<br />
or R.<br />
• R (Reverse). Selectable whenever the<br />
vehicle’s forward speed is less than 5<br />
mph. The maximum speed in reverse is<br />
limited to 15 mph. An audible tone will be<br />
heard when reverse gear is selected.<br />
• N (Neutral). Select this position and apply<br />
the hand brake if the vehicle needs to be<br />
stationary for a period of time.<br />
• D (Drive). Can be selected whenever the<br />
vehicle is stationary.<br />
Note: P (Park) is not a gear you can select. It<br />
is a state the vehicle is in when the<br />
transmission is locked and the rear wheels<br />
cannot turn. When the key is turned to the<br />
ACC position, this state is activated<br />
automatically, regardless of the position of<br />
the gear selector. In the event that the<br />
vehicle needs to hauled on a flatbed truck, P<br />
must be deactivated before the vehicle can<br />
be pulled onto the truck. See Vehicle<br />
recovery, page 10-13.<br />
Driving tips<br />
Driving an electric vehicle is similar to driving<br />
a gasoline-powered vehicle. Here are a few<br />
guidelines you should be aware of to help you<br />
maximize range.<br />
Drive sensibly to maximize range<br />
Energy consumption depends on driving<br />
habits and operating condition. Your vehicle<br />
is designed to travel over 200 miles on a<br />
charge.<br />
To get the maximum mileage from a charge,<br />
you should:<br />
• Avoid frequent acceleration and<br />
deceleration.<br />
• Anticipate stops and instead of using the<br />
brake pedal to slow down, move your foot<br />
off the accelerator. Whenever the vehicle<br />
is moving and your foot is off the<br />
accelerator, regenerative braking slows<br />
the vehicle and feeds energy back to the<br />
battery.<br />
Driving your vehicle<br />
6-3