ColorPage-Vivid 4XE USB - Genius

Service
Guide
ColorPage-Vivid 4XE USB
How to remove the Sliding Axle and the Timing Belt
Step 1
Hold the Sliding Axle & take out the Sliding Axle
from the module so lightly.
figure 2.4.1.
Step 2
Move the module to the middle of the base frame.
Take out the Sliding Axle from the module so lightly.
figure 2.4.2.
Step 3
Hold on the Timing Belt, and turn the spring .
Take off the other end by the same way, then you can
easily take off the Timing Belt from the Gear Wheel.
figure 2.4.3.
Step 4
To replace the Timing Belt, place alcohol in drops
once every 3~5 minutes and repeat 2~3 times to dissolve
green seal. After green seal was completely dissolved,
and then you may use a tweezers to take off the Timing
Belt from Module.
figure 2.4.4.
10