ColorPage-Vivid 4XE USB - Genius
ColorPage-Vivid 4XE USB - Genius
ColorPage-Vivid 4XE USB - Genius
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Service<br />
Guide<br />
<strong>ColorPage</strong>-<strong>Vivid</strong> <strong>4XE</strong> <strong>USB</strong><br />
Magnify the point of Belt-fixed (A)<br />
Timing Belt<br />
To install the Sliding Axle and the Timing Belt,<br />
reverse the steps shown above.<br />
Inside of<br />
belt-fixed<br />
point (A)<br />
Outside of<br />
belt-fixed<br />
point (A)<br />
Notice: Ensure that the Timing Belt is installed with the<br />
correct direction as shown in figure 2.4.5.<br />
figure 2.4.5.<br />
How to Replace the Motor<br />
Step 1<br />
Dissolve the green seal on the screws..<br />
Loosen the screws from fixed plate of idle arm<br />
with a screwdriver.<br />
figure 2.5.1.<br />
Step 2<br />
Disconnect the connector of the Motor that is<br />
connected to the Scan Board. Then , take off the<br />
Motor.<br />
figure 2.5.2.<br />
Step 3<br />
Motor wire fixed method shown as figure 2.6.3.<br />
Motor Line<br />
figure 2.5.3.<br />
★ To install the Motor, reverse the steps shown above. ★<br />
Notice: When installing the Motor, please do not turn the screw too tight. And don’t forget to<br />
use the green seal to fix the screw.<br />
11
Change language