The electrician's system: univers N - Hager

Wiring system
univers N
Description Technical Data Pack Cat. ref.
Quantity
UZ25V1
Wire clamp plastic, for cable entry, 1 Set = UZ25V1
large horizontal with UZ01V1 adaptor, 20 pcs.
vertical mounting on carrier
rails, with safety clip, to prevent
wires falling out, cable channel
cover mountable
Wire clamp plastic, for cable entry, 1 Set = UZ25V2
small horizontal with UZ01V1 adaptor, 20 pcs.
or on the back on DIN Rail,
vertical mounting on carrier rails,
with safety clip, to prevent wires
falling out, cable channel
cover mountable
UZ25V2
Adaptor for wire clamp plastic, for tightening 1 Set = UZ01V1
large / small the wire clamp. Use horizontally 20 pcs.
to the DIN Rail 35 x 1.5 mm.
50mm gap between rows
only for 35 x 7.5 x 1mm 1 Set = UZ01V2
DIN Rail
20 pcs.
125 mm gap between rows
UZ01V1
Wiring channels with cover and two channel 1 piece UZ51A1
78 x 31mm holders as well as fastening
1 field screws
UZ51A1
Wiring channels with cover and two channel 1 piece UZ52A1
78 x 31 mm holders as well as fastening
2 field screws
Channel holder with fastening screws 1 Set = UZ50A1
2 pcs.
UZ10D1
Channel cover 30mm 2m long for UZ51A1 and UZ52A1 20 UT50C
Kit carrier Height 150 mm 1 Set = UZ10D1
for building up kits
20 pcs.
from single parts
Height 300 mm 1 Set = UZ20D1
20 pcs.
Univers N
System
Height 450 mm 1 Set = UZ30D1
20 pcs.
Height 600 mm 1 Set = UZ40D1
20 pcs.
231