You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Assembly<br />
Install Hub Assembly in Bow<br />
Slide hub assembly into deck<br />
flange. Turn adjusting nut to<br />
lengthen or shorten threaded<br />
stud as needed.<br />
Adjust length so toggle is lined up with chainplate hole. Slide pin<br />
into chainplate and secure with cotter pin.<br />
Stud Length<br />
Shorten<br />
Lengthen<br />
Turn Adjusting Nut<br />
Clockwise<br />
Counter-Clockwise<br />
1 /16"– 1 /8"<br />
2–4 mm<br />
Distance between bottom of<br />
tack swivel and deck flange<br />
must be 1 /16"– 1 /8" (2–4 mm).<br />
10 MKIV Underdeck <strong>Unit</strong> 1, 2, 3<br />
From on-deck, pull up on unit to check height between deck flange and<br />
tack swivel. Make sure tack swivel is free to rotate when there is upward<br />
pressure on unit. Check this again when stay is up and tensioned.
Change language