You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Assembly<br />
Feeder/Final<br />
Tip: Do not remove foil clamp screws to adjust foil.<br />
Loosen screws, hold foils and bring clamp away<br />
from foils. Adjust and reclamp.<br />
Slide halyard swivel above feeder. Place feeder in foil<br />
recess. Push screw down so tab catches under foil.<br />
32 MKIV Underdeck <strong>Unit</strong> 1, 2, 3<br />
Tighten screw.<br />
Note: Screw will turn with some difficulty. It is plastic<br />
coated to prevent loosening due to vibration.<br />
Important! When removing feeder, loosen screw no more<br />
than one full turn. Slide screw up and remove feeder.