AVR 1600 - Harman Kardon

More documents

Recommendations

Info

REMOTE CONTROL FUNCTIONS Tuning Mode: This button toggles between manual (one frequency step at a time) and automatic (seeks frequencies with acceptable signal strength) tuning mode. It also toggles between stereo and mono modes when an FM station is tuned. Memory: After you have tuned a particular radio station, press this button, then the Numeric Keys, to save that station as a radio preset. Tuning: Press these buttons to tune a radio station. Depending on whether the tuning mode has been set to manual or automatic, each press will either change one frequency step at a time, or seek the next frequency with acceptable signal strength. Direct: Press this button before using the Numeric Keys to directly enter a radio station frequency. Clear: Press this button to clear a radio station frequency you have started to enter. Preset Stations Selector: Press these buttons to select a preset radio station. Tone Mode: Press this button to access the tone controls (bass and treble). Use the Navigation Buttons to make your selections. Disc Skip: This button has no effect on the receiver, but is used with some optical disc changers to skip to the next disc. Macros: These buttons may be programmed to execute long command sequences with a single button press. They are useful for programming the command to turn on or off all of your components, or for accessing specialized functions for a different component than you are currently operating. Night Mode: Press this button to activate Night mode with specially encoded Dolby Digital discs or broadcasts. Night mode compresses the audio so that louder passages are reduced in volume to avoid disturbing others, while dialogue remains intelligible. Track Skip: These buttons have no effect on the receiver, but are used with many source components to change tracks or chapters. Dim: Press this button to partially or fully dim the front-panel display. Transport Controls: These buttons have no effect on the receiver, but are used to control many source components. By default, when the remote is operating the receiver, these buttons will control a Harman Kardon Blu-ray Disc player or a DVD player. 12 13
CONNECTIONS There are different types of audio and video connections used to connect the receiver, the speakers, the video display, and the source devices. The Consumer Electronics Association has established the CEA ® color-coding standard. Some of these connectors are not used on the AVR 1600, although they may be found on other components in your system. See Table 1. Table 1 – Connection Color Guide Audio Connections Front (FL/FR) Center (C) Surround (SL/SR) Surround Back (SBL/SBR) Subwoofer (SUB) Digital Audio Connections Coaxial Optical Video Connections Speaker Connections Speaker cables carry an amplified signal from the receiver’s speaker terminals to each loudspeaker. They contain two wire conductors, or leads, inside plastic insulation, that are differentiated in some way, such as with colors or stripes. The differentiation preserves polarity, without which low-frequency performance can suffer. Each speaker is connected to the receiver’s speaker-output terminals using two wires, one positive (+) and one negative (–). Always connect the positive terminal on the speaker, which is usually colored red, to the positive terminal on the receiver, which is colored as indicated in the Connection Color Guide (Table 1). The negative terminals are both black. + Left White The AVR 1600 uses binding-post speaker terminals that can accept banana plugs or bare-wire cables. Banana plugs are inserted into the hole in the middle of the terminal cap. See Figure 1. Figure 1 – Binding-Post Speaker Terminals With Banana Plugs Bare wire cables are installed as follows (see Figure 2): 1. Unscrew the terminal cap until the pass-through hole is revealed. 2. Insert the bare end of the wire into the hole. 3. Hand-tighten the cap until the wire is held snugly. 1 2 3 Figure 2 – Binding-Post Speaker Terminals With Bare Wires Right Red Component Y Green Pb Blue Pr Red Composite Yellow S-Video HDMI Connections (digital audio/video) HDMI Blue Brown Input Green Purple Orange Output Gray Tan Subwoofer The subwoofer is dedicated to the low frequencies (bass), which require more power. To obtain the best results, most speaker manufacturers offer powered subwoofers that contain their own amplifier. Usually, a line-level (nonamplified) connection is made from the receiver’s Subwoofer Output to a corresponding jack on the subwoofer, as shown in Figure 3. Although the purple subwoofer outputs look similar to full-range analog audio jacks, they are filtered to allow only the low frequencies to pass. Don’t connect these outputs to any other devices. Figure 3 – Subwoofer CONNECTING SOURCE DEVICES TO THE AVR Audio and video signals originate in “source devices,” including your Blu-ray Disc or DVD player, CD player, DVR (digital video recorder) or other recorder, tape deck, game console, cable or satellite television box or MP3 player. The AVR’s tuner also counts as a source, even though no external connections are needed, other than the FM and AM antennas and the SIRIUS tuner module. Separate connections are required for the audio and video portions of the signal, except for digital HDMI connections. The types of connections used depend upon the capabilities of the source device and video display. Audio Connections There are two types of audio connections: digital and analog. Digital audio signals are required for listening to sources encoded with digital surround modes, such as Dolby Digital and DTS, or for noncompressed PCM digital audio. There are three types of digital audio connections: HDMI, coaxial and optical. Do not use more than one type of digital audio connection for each source device. However, it’s okay to make both analog and digital audio connections to the same source. NOTE: HDMI signals may carry both audio and video. If your video display device has an HDMI input, make a single HDMI connection from each source device to the AVR. Usually, a separate digital audio connection is not required. Turn the volume on your television all the way down. Digital Audio Preout Subwoofer The AVR 1600 is equipped with three HDMI (High-Definition Multimedia Interface) inputs, and one output. HDMI technology enables digital audio and video information to be carried using a single cable, delivering the highest quality picture and sound. The AVR 1600 uses HDMI (V.1.3a with Deep Color) technology and is capable of processing both the audio and video components of the HDMI data, minimizing the number of cable connections in your system. The AVR 1600 implements Deep Color, which increases by an order of magnitude the shades of color that can be displayed, and the latest lossless multichannel audio formats, including Dolby TrueHD and DTS-HD Master Audio. 13 15
Page 1 and 2: harman/kardon AVR 1600 5 X 40W 7.1
Page 3 and 4: AVR1600 harman/kardon SAFETY PRECAU
Page 5 and 6: AVR1600 harman/kardon AVR 1600 visi
Page 7 and 8: FRONT- PANEL CONTROLS Power Indicat
Page 9 and 10: REAR- PANEL CONNECTIONS AM and FM A
Page 11: REMOTE CONTROL FUNCTIONS The AVR 16
Page 15 and 16: CONNECTIONS If it’s available on
Page 17 and 18: INITIAL SETUP NOTE: If there are fe
Page 19 and 20: INITIAL SETUP HDMI Audio to TV: Det
Page 21 and 22: OPERATION • For direct access to
Page 23 and 24: TROUBLESHOOTING GUIDE Symptom Cause
Page 25 and 26: AVR1600 harman/kardon AVR 1600 EXPL
Page 27 and 28: AVR1600 harman/kardon 27
Page 37 and 38: AVR1600 harman/kardon Ref. Designat
Page 63 and 64:
AVR1600 harman/kardon Ref. Designat
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
AVR1600 harman/kardon 71
Page 73 and 74:
Page 75 and 76:
AVR1600 harman/kardon TOSHIBA CMOS
Page 77 and 78:
AVR1600 harman/kardon TC74HC4094AP/
Page 79 and 80:
AVR1600 harman/kardon NJW1321 WIDE
Page 81 and 82:
AVR1600 harman/kardon NJW1321 ■EQ
Page 83 and 84:
AVR1600 harman/kardon NJW1197C 8-CH
Page 85 and 86:
AVR1600 NJW1197C harman/kardon •
Page 87 and 88:
AVR1600 harman/kardon M24C64, M24C3
Page 89 and 90:
Page 91 and 92:
AVR1600 ADV7604 harman/kardon Preli
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
AVR1600 harman/kardon TMP92FD28 (3)
Page 101 and 102:
AVR1600 harman/kardon TMP92FD28 DVC
Page 103 and 104:
AVR1600 harman/kardon TMP92FD28 2.2
Page 105 and 106:
AVR1600 harman/kardon TMP92FD28 Tab
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
AVR1600 harman/kardon T5CN5 (2) On
Page 113 and 114:
AVR1600 harman/kardon T5CN5 1.2 Blo
Page 115 and 116:
AVR1600 harman/kardon T5CN5 Pin No.
Page 117 and 118:
AVR1600 harman/kardon T5CN5 2.2 Pin
Page 119 and 120:
AVR1600 harman/kardon T5CN5 Type Fu
Page 121 and 122:
AVR1600 harman/kardon T5CN5 Table 2
Page 123 and 124:
AVR1600 ESMT SDRAM harman/kardon M1
Page 125 and 126:
AVR1600 harman/kardon CS4970x4 Data
Page 127 and 128:
AVR1600 harman/kardon CS4970x4 Data
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
AVR1600 harman/kardon NJM2595 5-INP
Page 135 and 136:
AVR1600 harman/kardon NJM2595 ■ E
Page 137 and 138:
Page 139 and 140:
AVR1600 harman/kardon 74ACT04 HEX I
Page 141 and 142:
AVR1600 harman/kardon CS42528 114 d
Page 143 and 144:
AVR1600 harman/kardon CS42528 AD0/C
Page 145 and 146:
Page 147 and 148:
AVR1600 harman/kardon SEMICONDUCTOR
Page 149 and 150:
AVR1600 harman/kardon TRANSISTOR, R
Page 151 and 152:
6 5 4 3 2 1 AVR1600 harman/kardon C
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
6 5 4 3 2 1 AVR1600 harman/kardon S
show all

AVR 1600 - Harman Kardon

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?