PROFIBUS DP-Master

The Application Interface 143/315
Packet Description
structure PROFIBUS_FSPMM_PACKET_ALARM_NOTIFICATION_IND_T
Type: Indication
Area Variable Type Value / Range Description
Head
Data
structure TLR_PACKET_HEADER_T
ulDest UINT32 Destination queue handle
ulSrc UINT32 Source queue handle
ulDestId UINT32 ulAPM0Id Destination end point identifier, specifying the final
receiver of the packet within the destination process.
Set to 0 for the Initialization Packet
ulSrcId UINT32 ulFSPMM0Id Source end point identifier, specifying the origin of the
packet inside the source process
ulLen UINT32 16 + n Packet data length in bytes
ulId UINT32 0 ... 2 32 -1 Packet identification as unique number generated by
the Source process of the packet
ulSta UINT32 See section 7.1 Error Codes of the FSPMM-Task
ulCmd UINT32 0x221A PROFIBUS_FSPMM_CMD_ALARM_NOTIFICATION_IN
D - Command
ulExt UINT32 0 Extension (not in use, set to zero for compatibility
reasons)
ulRout UINT32 x Routing, do not change
structure PROFIBUS_FSPMM_ALARM_NOTIFICATION_IND_T
ulRem_Adr UINT32 0 … 125 Slave address of the slave causing the alarm
ulAlarm_Type UINT32 1 … 6 or
32 … 126
Type of the received alarm. See Table 77: Available
Alarm Types above.
ulSlot_Number UINT32 0 … 254 Slot number of module causing the alarm
ulSpecifier UINT32 Bit mask Alarm specifier. See explanation above in this section.
abDiagnostic_Us
er_Data
UINT8[]
Alarm diagnostic user data
Table 80: PROFIBUS_FSPMM_CMD_ALARM_NOTIFICATION_IND – Alarm Notification
PROFIBUS DP-Master |
DOC061001API12EN | Revision 12 | English | 2010-12 | Released | Public © Hilscher, 2006-2010