HS452, HS652 Rotary Vane Pumps - Agilent Technologies
HS452, HS652 Rotary Vane Pumps - Agilent Technologies
HS452, HS652 Rotary Vane Pumps - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4 Installation Procedure<br />
Installation<br />
WARNING!<br />
Take out the protective caps on the suction and exhaust flanges before doing<br />
anything else. In the event of an accidental start-up, the air inside the pump<br />
could violently expel the protective caps and harm the operator.<br />
WARNING!<br />
During installation, pay maximum attention that the suction flange is<br />
connected to the vacuum chamber and the exhaust flange is not closed (see<br />
the following figure). The pump must not be used as a compressor.<br />
Figure 2<br />
60/126 <strong>HS452</strong>, <strong>HS652</strong> <strong>Rotary</strong> <strong>Vane</strong> <strong>Pumps</strong> User Manual / 87-900-978-01 (L)