Form 5a - ICP Forests

4.14.2 XX2009.PPS
Form with information on passive sampler(s) on intensive
monitoring plot and at stations
Each data file has to start with a comment line. This line starts with an exclamation
mark:
!Sequence, country, plot, latitude, longitude, altitude, compound, sampler,
manufacturer, date_monitoring_1st, date_monitoring_last, measurements, col,
altitude_m, elevation_lowest2500, elevation_lowest5000, other_observations
Column Description Format Ref_Tab Item #
1 – 4 Sequence number I 4
6 – 7 Country code (France = 01, etc.) I 2 X (1)
9 – 12 Observation plot number
14 – 18 Number of active sampler AS001- AS999 (active sampler = ASxxx)
20 – 22 Compound air quality (74)
14 – 20 Latitude in +DDMMSS C 7 (4)
22 – 28 Longitude in (+ or -) DDMMSS C 7 (4)
30 – 31 Altitude (in 50 m classes 1-51) I 2 X (7)
33 – 35 Compound air quality C 3 X (89)
37 – 38 Sampler ID I 2 (92)
40-41 Passive sampler manufacturer C 2 X (93)
43-48 Start date measurements (DDMMYY) Date (3)
50-55 End date measurements (DDMMYY) Date (3)
57-58
60-60
Number of measurements with passive
sampler (99)
Passive sampler co-located with continuous
analyzers (Y/N)
62-65 Altitude (in m)* I 4
67-70
72-75
Lowest elevation in a circular area of 2.5 km
radius* (in 9999 m)
Lowest elevation in a circular area of 5.0 km
radius* (in 9999 m)
I 4
I 2
Y/N (96)
I 4 (97)
I 4 (97)
77-116 Observations C 40 (84)
0
*Only for ozone measurements
Note: For continuous analyzers: If for a given pollutant and plot measurements are taken with more
than one continuous analyzer, identify them with a different sampler_ID (e.g. with succesive numbers:
01, 02, 03, ...)Note that each passive sampler has a unique code. This is Country code –
plotnumber – sampler ID
Page 60 / 151