Alcatel 5081, 5101, CFV 100, 5081 CP IS, Turbo Pump, Turbopack ...

CHAPTER 4 : OPERATION
66
Turbomolecular pump TMP.
Roughing pump RP.
(See electrical diagram p. 9).
Standard model
I
I
PTM
TMP
I
0;
j
l-
PPM
RP
Start :
- TMP and RP off.
- Open water line.
- Start. Proceed as follows:
. Throw line switch to the right position .
. Start the TMP by pushing the power switch on right.
Stop:
- Stop the TMP by pushing on the left the "stop" switch.
- Stop the RP by pushing the line switch on the left.
- RP and TMP off. Push "Stop" button.
-Inert gas enters inlet (1,5 mn or more).
- Shut off water.
- Push the line switch in the desired position to obtain the starting procedure (see parag. start).
062794 • 10/1993