AC/DC TIG WELDER - Harbor Freight Tools
AC/DC TIG WELDER - Harbor Freight Tools
AC/DC TIG WELDER - Harbor Freight Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PRODUCT SPECIFICATIONS<br />
Item<br />
Electrical Requirements<br />
Welding Modes (4)<br />
Duty Cycles<br />
Material Capacity<br />
Welding Machine Coolant Type<br />
Gun Gas Hose Length<br />
Ground Clamp Cable Length<br />
Accessories<br />
Weight<br />
Description<br />
Input Voltage: 220V / 60 Hz / 69 Input Amperage<br />
Built-In Thermal Overload Protection<br />
Required Power Cord (not included) Rating: 6 AWG, Maximum length 25’<br />
Must be direct wired to a 220V, 70 Amp, dedicated circuit<br />
<strong>AC</strong> MMA / <strong>DC</strong> MMA / <strong>AC</strong> <strong>TIG</strong> / <strong>DC</strong> <strong>TIG</strong>.<br />
40% @ 200 AMPs <strong>AC</strong> / 60% @ 165 AMPs <strong>AC</strong> / 100% @ 130 AMPs <strong>AC</strong><br />
40% @ 170 AMPs <strong>DC</strong> / 100% @ 110 AMPs <strong>DC</strong><br />
Suitable for all ferrous and non-ferrous metals<br />
Forced Air Cooled<br />
16’ 9-1/2”Long<br />
16’ 9-1/2”Long<br />
Welding Gloves / Welding Mask<br />
Chipping Hammer / Wire Brush<br />
127.05 Pounds<br />
SAVE THIS MANUAL<br />
You will need this manual for the safety warnings and precautions, assembly, operating,<br />
inspection, maintenance and cleaning procedures, parts list and assembly diagram.<br />
Keep your invoice with this manual. Write the invoice number on the inside of the front<br />
cover. Keep this manual and invoice in a safe and dry place for future reference.<br />
UNP<strong>AC</strong>KING<br />
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 23<br />
and 26 are included. If any parts are missing or broken, please call <strong>Harbor</strong> <strong>Freight</strong> <strong>Tools</strong><br />
at the number shown on the cover of this manual as soon as possible.<br />
GENERAL SAFETY RULES<br />
WARNING!<br />
READ AND UNDERSTAND ALL INSTRUCTIONS<br />
Failure to follow all instructions listed below may result in<br />
electric shock, fire, and/or serious injury.<br />
SAVE THESE INSTRUCTIONS<br />
WORK AREA<br />
1. Keep your work area clean and well lit. Cluttered benches and dark areas<br />
invite accidents.<br />
2. Do not operate welding equipment in explosive atmospheres, such as in<br />
the presence of flammable liquids, gases, or dust. Welding equipment<br />
creates sparks which may ignite the dust or fumes.<br />
SKU 91149 For technical questions, please call 1-800-444-3353. PAGE 2