Marmitek IP Camera series advanced installation guide

address of the camera)/mpeg4.
Supports Multiple Profiles***
The camera supports multiple profiles simultaneously, so that you
can separately set up different image settings (such as image quality
and frame rate) for the three video types of the camera: MPEG4,
MJPEG, and 3GPP.
I/O Connectors Provided**
The Marmitek IP RoboCam camera provides the I/O connectors on
the rear panel (IN/OUT), which provide the physical interface to send
and receive digital signals to a variety of external alarm devices. You
can connect a special featured device, and then configure the
settings and control the device from the GPIO Trigger window of
Web Configuration.
Remote Control Supported
By using a standard Web browser or the bundled UltraView software
application, the administrator can easily change the configuration of
the camera via Intranet or Internet. In addition, the camera can be
upgraded remotely when a new firmware is available. The users are
also allowed to monitor the image and take snapshots via the
network.
Supports Connection to the External Devices***** ***
With the auxiliary Input/Output connectors, you can connect the
camera to a variety of external devices, such as the external speaker
and the USB device.
Multiple Platforms Supported
The camera supports multiple network protocols, including TCP/IP,
SMTP e-mail, HTTP, and other Internet related protocols. Therefore,
you can use the camera in a mixed operating system environment,
such as Windows 2000 and Windows XP.
Multiple Applications Supported
Through the remote access technology, you can use the cameras to
monitor various objects and places for your own purposes.
For example, babies at home, patients in the hospital, offices and
IP Eye Anywhere IP RoboCam 11