Marmitek IP Camera series advanced installation guide

More documents

Recommendations

Info

CHAPTER 4 CONFIGURING THE CAMERA 4.1 Using the Web Configuration You can access and manage the Marmitek IP camera through the Web browser and the provided software application UltraView. This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the Web browser. To configure the camera, click Setup on the main page of Web Configuration. The Web Configuration will start from the Basic page. IP Eye Anywhere IP RoboCam 23
The Web Configuration contains the settings that are required for the camera in the left menu bar, including Smart Wizard, Basic, Network, Video/Audio, Event Server, Motion detect, Event Config, Tools, USB, and Information. 4.2 Using Smart Wizard The Marmitek IP camera’s Smart Wizard lets you configure your camera easily and quickly. The wizard will guide you through the necessary settings with detailed instructions on each step. To start the wizard, click Smart Wizard in the left menu bar. Step 1. Camera Settings 24 © MARMITEK
Page 2 and 3: 1 PREFACE Thank you for purchasing
Page 4 and 5: 2 CONTENTS 0 ......................
Page 6 and 7: CHAPTER 1 INTRODUCTION TO YOUR CAME
Page 8 and 9: Infrared LEDs (x7)***** allow your
Page 10 and 11: Ethernet Cable Connector connects t
Page 12 and 13: address of the camera)/mpeg4. Supp
Page 14 and 15: CHAPTER 2 HARDWARE INSTALLATION 2.1
Page 16 and 17: 2.2 Connecting the Camera to LAN/WL
Page 18 and 19: CHAPTER 3 ACCESSING THE CAMERA 3.1
Page 20 and 21: page will appear as below: Live Vie
Page 22 and 23: To set up the preset positions, mov
Page 26 and 27: Enter the name for the camera and p
Page 28 and 29: Step 5. Confirm Settings This step
Page 30 and 31: This item allows you to set the LED
Page 32 and 33: to the camera. To modify the user
Page 34 and 35: This item allows you to select the
Page 36 and 37: Network >> IP Filter The IP Filter
Page 38 and 39: Network >> Wireless Setting* The ca
Page 40 and 41: Encryption: Select the WEP option t
Page 42 and 43: 4.6 Setting up Video & Audio The Vi
Page 44 and 45: Video & Audio >> Video MPEG4*** -
Page 46 and 47: Video & Audio >> Audio**** ***** C
Page 48 and 49: - Password: Enter the password to l
Page 50 and 51: - Receiver #2 Email Address: Enter
Page 52 and 53: 4.8 Motion Detect The Motion Detect
Page 54 and 55: - Snapshot/Recording Subfolder: You
Page 56 and 57: - Schedule Profile: Select a schedu
Page 58 and 59: Event Configuration >> GPIO Trigger
Page 60 and 61: Factory Reset Click Reset to restor
Page 62 and 63: - When Disk Full: Select Stop Recor
Page 64 and 65: APPENDIX A.1 Specification Image
Page 66 and 67: Temperature Humidity EMI FCC Class
Page 68 and 69: A.3 Glossary of Terms NUMBERS 10BAS
Page 70 and 71: Enterprise network Ethernet An ente
Page 72 and 73: ISP J JAVA ISP (Internet Service Pr
Page 74 and 75:
Protocol Communication on the netwo
Page 76 and 77:
User Name Utility UTP The USERNAME
Page 78:
IP Eye Anywhere IP RoboCam 77
show all

Marmitek IP Camera series advanced installation guide

Create successful ePaper yourself

Delete template?

Save as template?