10-in-1 Remote Control - Kompernass
10-in-1 Remote Control - Kompernass
10-in-1 Remote Control - Kompernass
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. With the or button t select "LEARN CLEAR"<br />
(taught delete) and confirm with the OK button l. In<br />
the LCD display q "CONFIRM CLEAR" (confirm delete)<br />
appears.<br />
4. Confirm with the OK button l. In the LCD display q<br />
"SUCCESS" appears. All programmed buttons are deleted.<br />
F<strong>in</strong>ally the menu will automatically end.<br />
Note:<br />
When the LCD display shows “CONFIRM CLEAR” you can<br />
stop the deletion with the EXIT button y.<br />
Macro configuration<br />
With the MACRO function up to 16 button commands can<br />
be carried out with the press of a s<strong>in</strong>gle button, that is to say,<br />
several previously saved control commands can be deleted<br />
with one MACRO button. There are 6 Macro memory slots<br />
available for you.<br />
To programme a Macro<br />
For Macro programm<strong>in</strong>g proceed as follows:<br />
1. Hold down the S button r for a little longer than 3 seconds.<br />
The notice "LANGUAGE SETUP" appears.<br />
2. With the or button t select "MACRO SETUP" and<br />
confirm with the OK button l. In the display "MACRO<br />
SETUP 1" appears.<br />
3. With the or button t select the memory slot to be<br />
programmed (MACRO SETUP 1 - 6) and confirm with the<br />
OK button l.<br />
4. In the LCD display q "MACRO STEP" appears. Now<br />
press, one after the other, the desired buttons (max. 16).<br />
The sequence should beg<strong>in</strong> with a device button e.<br />
5. By default the Macro commands are sent <strong>in</strong> <strong>in</strong>tervals of<br />
1 every second. S<strong>in</strong>ce many devices react sluggishly it is<br />
possible that the sequence of the Macro commands are<br />
sent too quickly to the device. Then you have the option<br />
of programm<strong>in</strong>g, before a button command, a pause<br />
of between 5 - 21 seconds. For this purpose press, if necessary<br />
repeatedly, the MACRO button i. Below<br />
and to the right the LCD display q shows the current<br />
pause length <strong>in</strong> seconds.<br />
6. When the maximum number of button commands is<br />
reached the LCD display q shows "FULL".<br />
7. Save the entry with the S button r. In the LCD display q<br />
"MACRO SETUP" appears.<br />
8. If, with the selection of the Macros to be programmed<br />
(step 3), you select a memory slot that is already occupied<br />
the exist<strong>in</strong>g Macro will be overwritten.<br />
9. Repeat the process from step 3 to create further Macros.<br />
<strong>10</strong>. With the EXIT button y you move back a level <strong>in</strong> the<br />
menu, except dur<strong>in</strong>g the <strong>in</strong>put of the button commands.<br />
- 21 -