TVA Flowmeter for Saturated Steam Service with ... - Spirax Sarco

9.2 HART TM parameters
Basic set-up
Parameters in bold can be changed/edited.
Parameter Explanation Format Default
Tag
Long tag
(required)
Date
Descriptor
Message
Final
Assembly
Number
Modbus
polling
mode
Device flags
Device
profile
Identifies the device in
Wireless network. In most
installations it indicates
the mounting locations
and function. The term
originates from the physical
tags that were attached to
the device.
Identifies the device in
Wireless network. It is also
used for setting up burst
mode and event notification.
This must be unique.
Enables the user to enter a
specific date to be stored,
e.g. installation, last
parameter change or last
calibration date.
Description of device
location or location. Can be
used by the user in any way.
Text associated about the
field device. Can be used by
the user in any way.
The manufacturer revision
number. Do not change.
Enables polling if meter is
attached or disable if acting
as a repeater. The device
will reset and there will
be a brief loss of wireless
connection after a change
to this parameter.
List the special features
in the device. Using the
mouse, right click and select
'display value' to see the
flag status.
A description of the type of
device.
8 alphanumeric
characters max.
(Packed ASCII
String)
32 alphanumeric
characters max.
(ISO Latin 1)
mm / dd / yy
(Gregorian
calendar)
16 alphanumeric
characters max.
(Packed ASCII
String)
16 alphanumeric
characters max.
(Packed ASCII
String)
WITEG
IDX**
Date of manufacture
DEFLT
DESCRIPTOR
SPIRAX SARCO
DEFAULT
MESSAGE VOID
0 to 16,777215 -
Enabled or disabled
0x00 to 0xFF
(hexadecimal)
-
Enabled
0x00
WirelessHART
Device
42
IM-P337-62 MI Issue 1