Instructions for Use, Manual JURA IMPRESSA Z5 - Esperanza

partsguru.com

Instructions for Use, Manual JURA IMPRESSA Z5 - Esperanza

The IMPRESSA Z5 – Generation II Manual

The ‘IMPRESSA Manual’ has been awarded the seal of

approval by the independent German Technical Inspection

Agency, TÜV SÜD, due to its easy-to-understand style, its

thoroughness and coverage of safety aspects.


Table of contents

Your IMPRESSA Z5

IMPORTANT SAFEGUARDS 4

Control elements and accessories 8

Proper use 10

For your safety 10

The IMPRESSA Z5 Manual 13

Model variants ..............................................................................................................................................14

Symbol description ......................................................................................................................................14

Welcome to the world of IMPRESSA! 15

1 IMPRESSA Z5 – ‘Two at once’ 16

JURA on the Internet ....................................................................................................................................17

2 Preparing and using for the first time 18

Supplied as standard ...................................................................................................................................18

Setting up ......................................................................................................................................................18

Filling the water tank ...................................................................................................................................18

Filling the bean container ...........................................................................................................................19

First-time use ................................................................................................................................................19

Using and activating filter ..........................................................................................................................21

Assessing and setting water hardness ....................................................................................................22

Adjusting grinder ........................................................................................................................................ 23

Switching on ................................................................................................................................................24

Switching off (Standby) ..............................................................................................................................25

3 Familiarising yourself with the control options 26

Preparation at the touch of a button .......................................................................................................26

One-off setting before and during preparation .....................................................................................27

Entering a permanent setting for the amount of water for a cup size..............................................28

Permanent settings in programming mode ..........................................................................................29

View information and care status ............................................................................................................ 32

4 Recipes 34

5 Preparation at the touch of a button 40

Barista tips ....................................................................................................................................................40

Ristretto .........................................................................................................................................................41

Espresso ........................................................................................................................................................42

Coffee ............................................................................................................................................................42

Special coffee ...............................................................................................................................................42

Cappuccino...................................................................................................................................................42

Latte macchiato ...........................................................................................................................................43

2


Table of contents

Pre-ground coffee .......................................................................................................................................45

Hot milk ........................................................................................................................................................46

Hot water .....................................................................................................................................................46

6 Permanent settings in Programming mode 48

Products ........................................................................................................................................................48

Energy-save mode .......................................................................................................................................51

Time and weekday ......................................................................................................................................52

Programmable Switch-on time ................................................................................................................53

Automatic switch-off ..................................................................................................................................54

Rinses ............................................................................................................................................................55

Unit amount of water/time format ..........................................................................................................56

Logo ...............................................................................................................................................................57

Language ......................................................................................................................................................58

Rename .........................................................................................................................................................58

7 Maintenance 60

Maintenance tips .........................................................................................................................................60

Rinse machine..............................................................................................................................................60

Changing the filter .......................................................................................................................................61

Clean machine .............................................................................................................................................63

Descale machine .........................................................................................................................................65

Rinsing the cappuccino nozzle .................................................................................................................68

Cleaning the cappuccino nozzle ...............................................................................................................68

Dismantling and rinsing the cappuccino nozzle ...................................................................................70

Removing foreign objects .........................................................................................................................70

Cleaning the bean container .....................................................................................................................70

Descaling the water tank ............................................................................................................................71

8 CLARIS plus filter cartridge – Water for perfect coffee 73

9 ‘The milk makes the difference’ 81

10 Accessories and Service 82

11 Display messages 91

12 Troubleshooting 94

13 Transport and environmentally neutral disposal 96

Transport / Empty system .........................................................................................................................96

Disposal .........................................................................................................................................................96

14 Technical data 97

15 Key technologies and products 100

16 JURA contact details 105

Index 110

3


Important Safeguards

IMPORTANT SAFEGUARDS

These safeguards apply for machines with UL safety test (see rating

plate and chapter 14, ‘Technical data’).

Follow the basic safety

precautions

When using electrical appliances, basic safety precautions should

always be followed, to reduce the risk of fire, electric shock, and/or

injury to persons, including the following:

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Read all instructions.

Do not touch hot surfaces. Use handles or knobs.

To protect against fire, electric shock and injury to persons, do

not immerse cord, plugs, or body of machine in water or other

liquid.

Close supervision is necessary when any appliance is used by

or near children.

Unplug from outlet when not in use and before cleaning.

Allow to cool before putting or taking off parts, and before

cleaning the appliance.

Do not operate any appliance with a damaged cord or plug or

after the appliance malfunctions, or has been damaged in any

manner. Return appliance to the nearest authorized service

facility for examination, repair or adjustment.

The use of accessory attachement not recommended by the

appliance manufacturer may result in fire, electric shock, or

injury to persons.

Do not use outdoors.

Do not let the cord hang over the edge of a table or counter,

or touch hot surfaces.

Do not place on or near a hot gas or electric burner, or in a

heated oven.

Always attach plug to appliance first, then plug cord into the

wall outlet. To disconnect, turn any control to ‘OFF’ then

remove plug from wall outlet.

Do not use appliance for other than intented use.

Use extreme caution when dispensing hot steam.

For household use only.

SAVE THESE INSTRUCTIONS

4


Important Safeguards

Special cord set instructions

a. A short power supply cord is provided to reduce the risk

resulting from becoming entangled in or tripping over a long

cord.

Your IMPRESSA has a 3-pin grounded plug.

b. Longer extension cords are available and may be used if care

is exercised in their use.

c. If an extension cord is used,

1. the marked electrical rating of the extension cord should be

at least as great as the electrical rating of the appliance,

and

2. if the appliance is of the grounded type, the extension

courd should be a grounding type 3-wire cord, and

3. the longer cord shall be arranged so that it will not drape

over the counter top or tabletop where it can be pulled on

by children of tripped over.

Z

Z

Z

As a safety feature, this plug will fit in a polarized outlet only

one way.

If the plug does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician.

Do not modify the plug in any way or attempt to defeat this

safety feature.

Warning

To reduce the risk of fire or electric shock, do not remove any service

covers. No user serviceable parts inside. Repair should be done by

authorized personnel only.

Caution

This appliance is for household use. Any servicing other than cleaning

and user maintenance should be performed by an authorized

service representative:

Z

Z

Z

Z

Do not immerse base in water or try to disassemble.

To reduce the risk of fire or electric shock, do not remove the

base. No user serviceable parts inside. Repair should be done

by authorized service personnel only.

Check voltage to be sure that the voltage indicated on the

name plate agreees with your voltage.

Never use warm or hot water to fill the water container! Use

cold water only.

5


Important Safeguards

Z

Z

Keep your hands and the cord away from hot parts of the

appliance during operation.

Never clean with scouring powders or hard implements.

NEVER DO

(or you will void your

warranty protection):

Z

Z

Z

Z

Never fill instant coffee, chocolate mix etc. into the grinder or

ground coffee funnel (grunder by-pass). It will damage the

functioning of the brewing chamber.

Never fill sugar coated coffee beans into the bean hopper. In

case of doubt, call your dealer.

Never fill anything other than coffee beans into the bean container

(no chocolate, no rice, no nuts, no spices, nothing other

than roasted coffee beans).

Never do anything with the machine which is not described in

the User‘s Manual. In case of doubt, call your dealer.

6


Important Safeguards

7


Control elements and accessories

Control elements and accessories

1

2

9

10

3

11

4

12

5

13

6

7

8

14

Figure: IMPRESSA Z5 – Generation II Alu

1 Bean container cover

2 Water tank cover

3 Water tank

4 Power switch and power cable (side)

5 One Touch Cappuccino nozzle, long spout

6 One Touch Cappuccino nozzle, short

spout

7 Coffee grounds container

8 Drip tray

9 Grinding wheel

10 Bean container with aroma preservation

cover

11 Filler funnel for pre-ground coffee

12 Height-adjustable coffee spout

13 Hot water spout

14 Cup platform

8


Control elements and accessories

1

2 3

4 5 6 7

8

9 10 11 12

Top of the machine

1 Q On/off button

2 f Rotary Switch

3 c Maintenance button

Front

4 z Milk button

5 q Latte macchiato button

6 p Cappuccino button

7 e Special Coffee button

8 Display

9 m Hot water button

10 u Ristretto button

11 i Espresso button

12 o Coffee button

9


Important information

Proper use

The machine has been designed and built for domestic use. It should

only be used to prepare coffee and to heat milk and water. Use for

any other purpose will be deemed improper. JURA cannot accept

any responsibility for the consequences of improper use.

Keep this manual close to the IMPRESSA and, if appropriate, pass it

on to the next user.

For your safety

Please read and note carefully the following important safety information.

By doing this, you can avoid the life-threatening danger of electric

shock:

Z Never use a machine which has been damaged or with a

defective power cable.

Z For information on what to do in case of damage, for example

if there is a smell of burning, unplug the machine immedi ately

from the mains supply and contact the JURA service centre.

Z If the power cable for this machine is damaged, it must be

repaired either directly by JURA or by a JURA approved service

centre.

Z Make sure that the IMPRESSA and the power cable are not

located close to hot surfaces.

Z Be careful to ensure that the power cable does not get caught

and does not rub against sharp edges.

Z Never open and repair the machine yourself. Do not modify

the machine in any way that is not described in the IMPRESSA

Manual. The machine contains live parts. If opened, there is a

danger of serious injury. Repairs may only be carried out by

JURA approved service centres, using original spare parts and

accessories.

There is a risk of scalds or burns on the spouts or in the nozzle:

Z

Z

Place the machine out of the reach of children.

Do not touch any hot parts. Use the handles provided.

10


Important information

Z

Be careful to ensure that the appropriate nozzle is installed

and clean. The nozzle or parts of the nozzle might come off if

the parts are not assembled correctly or a blockage occurs.

A defective machine is not safe and could cause injury or fire. To

avoid damage and any associated risk of injury or fire:

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Never allow the power cable to loosely hang down. The power

cable can be tripped over or damaged.

Protect your IMPRESSA from environmental influences such

as rain, frost and direct sunlight.

Do not put the IMPRESSA, cable or connections in water.

Do not put the IMPRESSA or any individual parts in the dishwasher.

Turn your IMPRESSA off at the power switch before starting

any cleaning operation. Always wipe your IMPRESSA with a

damp cloth rather than a wet one, and protect it from prolonged

water splash.

Only connect the machine to a power supply in accordance

with the technical data (see rating plate and Chapter 14,

‘Technical data’).

Use only original JURA care products. Use of accessories that

are not explicitly recommended by JURA could damage the

IMPRESSA.

Do not use any coffee beans treated with additives or caramelised

coffee beans.

Always fill the water tank with cold, fresh mains water.

If you will be absent for an extended period, turn the machine

off and unplug.

Risk to children and persons with limited capabilities in operating

machines:

Z The machine is not designed to be operated by children and

persons with limited capabilities.

Z The machine may only be used by persons who are able to

operate the machine safely.

11


Important information

Safe handling of the CLARIS plus filter cartridges:

Z CLARIS plus filter cartridges should be kept out of the reach of

children.

Z Store them dry in the sealed package.

Z Protect them from heat and direct sunlight.

Z Do NOT use damaged CLARIS plus filter cartridges.

Z Do NOT open CLARIS filter cartridges.

12


The IMPRESSA Z5 Manual

The IMPRESSA Z5 Manual

You are holding the manual for your IMPRESSA Z5 in your hand. It

will help you to familiarize yourself with your IMPRESSA safely and

quickly and teach you the full range of facilities it offers.

Chapter 2, ‘Preparing and using your IMPRESSA for the first time’,

explains step-by-step how to set up and prepare the IMPRESSA.

Chapter 3, ‘Familiarising yourself with the control options’ is important

for you to read as you are familiarising yourself with your

IMPRESSA. It invites you to actively explore all the different coffee

experiences that it offers.

As coffee and coffee specialities are very important to JURA, we have

compiled a selection of tasty suggestions for you in Chapter 4,

‘Recipes’.

All the other chapters are intended to help you when you have a

specific query.

If you use the IMPRESSA Z5 Manual, you will become a master at

preparing exciting coffee specialities, you will be a Barista!

13


Model variants

The IMPRESSA Z5 – Generation II Manual covers all Z series IMPRESSAmodels.

Symbol description

Warnings

CAUTION

CAUTION

Always take note of any information marked

with the CAUTION or WARNING symbol. The

signal word WARNING points out potential risk

of serious injury, and the signal word CAUTION

potential risk of slight injury.

The CAUTION symbol is used to draw attention

to circumstances which could cause the

machine to become damaged.

Symbols used

E

@

T

Information and tips to make things easier for

you as you use your IMPRESSA.

References to the online JURA website, where

you can find interesting further information:

www.jura.com

Prompt to take action. This symbol means that

you are being prompted to perform some

action.

14


Welcome to the world of IMPRESSA!

Welcome to the world of IMPRESSA!

Dear customer,

We thank you for the trust that you have placed in us by purchasing

a JURA IMPRESSA coffee machine. The machines, which are produced

in Switzerland, have already impressed independent, critical

testers of goods and design award juries. We will do everything we

can to ensure that this fully automated, genuine 2-cup Espresso and

coffee machine continues to deliver perfect coffee specialities at the

press of a button to your family and your guests for years to come.

The IMPRESSA Manual will teach you everything you need to know

on the subject of operating and tailoring your IMPRESSA to your

particular preferences. Other subjects covered include how to solve

the problem of scale build-up and important tips on care. Our primary

concern is to stimulate your imagination with attractive coffee

recipes and to invite you to put the wealth of possibilities offered by

the JURA fully automated machine to use on a daily basis.

We wish you many stimulating and enjoyable moments with your

IMPRESSA.

Yours sincerely,

Emanuel Probst

General Manager

15


1 IMPRESSA Z5 – ‘Two at once’

1 IMPRESSA Z5 – ‘Two at once’

Coffee that fulfils your

wildest dreams

Coffee specialities are extremely popular. An increasing number of

perfect hosts treat themselves, friends and families to a wide range

of coffee specialities in the comfort of their own homes. Milk is a

very important ingredient of a perfect cup of coffee, both foamed

and heated, as cappuccino, latte macchiato, and caffè latte, also

enhanced with different flavours, are now firm favourites on the

almost inexhaustible and varied list of coffee recipes alongside

alongside the classic ristretto, espresso and café crème.

JURA has now developed the second generation of the revolutionary

IMPRESSA Z line to satisfy the high demands of the growing community

of speciality gourmets.

Z

Z

Z

One Touch Cappuccino nozzle : The machines of the IMPRESSA

Z line, which are in the truest sense fully- automatic coffee speciality

machines, can prepare two treats for the eye and palate

at the touch of a button with the One Touch cappuccino nozzle.

‘Two at once’ – the quickest, most direct and simple way

to delve into the world of coffee and to revel in all its variety.

Rotary Switch – Intuitive operation : You can ‘navigate’ reliably

through all operating and programming steps by simply

turning and pressing the switch. The information on the plain

text and graphic display is in full view at all times. The focus is

fully on your own personal taste. Simply select the coffee

strength, amount of water and temperature according to your

individual preferences.

Stainless steel vacuum milk container : Your fully-automatic

coffee machine is equipped as standard with a vacuum milk

container which keeps the milk cool all day due to its clever

design.

16


1 IMPRESSA Z5 – ‘Two at once’

Z

Active bean monitoring: The IMPRESSA Z5 banishes the

sound of empty rotating coffee grinders and half-full cups

once and for all. It always shows you when the coffee beans

need replenishing in good time. The filling level of the bean

container is continuously monitored optically.

JURA on the Internet

Visit us on the Internet.

@

At www.jura.com you will find interesting and up-to-date

information on your IMPRESSA and on every aspect of

coffee.

Knowledge Builder

You can familiarize yourself with your IMPRESSA Z5 in a fun way on

the PC.

@

The Knowledge Builder awaits you at www.jura.com. The

interactive assistant, LEO, will assist you and explain the

benefits of the IMPRESSA and how to use it.

17


2 Preparing and using your IMPRESSA for the first time

2 Preparing and using for the first time

This chapter provides you with the information you need to use your

IMPRESSA without any problems. You will prepare your IMPRESSA

step-by-step for your first coffee experience.

Supplied as standard

The following items are supplied as standard:

Z

Z

Z

Z

Z

Z

Your JURA IMPRESSA fully automatic coffee machine

Stainless steel vacuum milk container

Milk pipe

The Welcome Pack, which includes:

U The IMPRESSA Z5 – Generation II Manual

U IMPRESSA Z5 – Generation II: Quick Reference Guide

U CLARIS plus filter cartridge (2x)

U Filter cartridge extension

U Grinder key

U Measuring spoon for pre-ground coffee

U JURA cleaning tablets

U Aquadur® test strips

JURA Auto-Cappuccino Cleaner

JURAworld of Coffee gift

Keep the packaging of your IMPRESSA. It should be used to protect

the machine during transportation.

Setting up

Filling the water tank

When setting up your IMPRESSA, please note the following:

Z Set the IMPRESSA down on a horizontal surface that is not

sensitive to water.

Z Choose a spot for your IMPRESSA which is protected against

overheating.

To enjoy perfect coffee we recommend changing the the water

every day.

E

Only use fresh, cold water to refill the water tank and never

milk, mineral water or other liquids.

18


2 Preparing and using your IMPRESSA for the first time

T Remove the water tank and rinse it with cold water.

T Fill the water tank with fresh, cold mains water and

reinsert.

Filling the bean

container

CAUTION

The bean container has an aroma preservation cover. This will ensure

that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar),

pre-ground or freeze-dried coffee will damage the grinder.

T Only use untreated coffee beans to refill the bean container.

T Open the cover of the bean container and remove the aroma

preservation cover.

T Remove any dirt or foreign objects inside the bean container.

T New machines contain an information sheet in the bean

container. Remove this information sheet.

T Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

First-time use

WARNING

If the machine is operated with a defective power cable, there is a

danger of electric shock.

T Never use a machine which has a defective power cable.

Precondition: The water tank and bean container are full.

T Insert the mains plug into a power socket.

3 T Switch on the IMPRESSA using the power switch on the left

side of the machine.

The On/Off button Q lights up (standby).

Q T Press the On/Off button to switch the IMPRESSA on.

The Rotary Switch lights up. SPRACHE DEUTSCH is

displayed.

g T Turn the Rotary Switch until the desired language is

displayed. For example LANGUAGE ENGLISH.

19


2 Preparing and using your IMPRESSA for the first time

k T Press the Rotary Switch to confirm the language.

CONFIRMED √ appears briefly on the display to confirm

the setting.

TIME HOURS --:--

g T Turn the Rotary Switch to set the hour.

TIME HOURS 12:00 (Example)

k T Press the Rotary Switch to confirm the hour setting.

TIME MINUTES 12:00

g T Turn the Rotary Switch to set the minutes.

TIME MINUTES 12:45 (Example)

k T Press the Rotary Switch to confirm the minute setting.

CONFIRMED √ appears briefly on the display.

WEEKDAY MONDAY

g T Turn the Rotary Switch to set the weekday.

WEEKDAY WEDNESDAY (Example)

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display.

PRESS RINSE, the maintenance button c lights up.

T Place a receptacle under the hot water spout and below the

cappuccino nozzle.

c T Press the maintenance button.

SYSTEM FILLS, the system fills up with water and the

maintenance button c flashes. A small amount of water

flows from the cappuccino nozzle and the hot water spout.

This operation stops automatically. WELCOME TO JURA

appears on the display.

UNIT IS HEATING

PRESS RINSE, the maintenance button c lights up.

T Place a receptacle under the coffee spout.

c T Press the maintenance button.

The machine rinses itself, stopping automatically.

COFFEE READY appears on the display. Your IMPRESSA

is ready to use.

E

After first-time use do not disconnect the IMPRESSA from the

power supply for 24 hours to ensure that it is in the optimum

operating condition.

20


2 Preparing and using your IMPRESSA for the first time

E

When a coffee speciality has been prepared for the first time,

it is possible that FILL BEANS appears on the display as

the grinder has not yet been completely filled with coffee

beans. In this case prepare a different coffee speciality.

Using and activating

filter

Your IMPRESSA no longer has to be descaled if you use the CLARIS

plus filter cartridge.

@

You can also try out the ‘Insert filter’ operation online. Visit the

Knowledge Builder at www.jura.com.

Further information on the CLARIS plus filter cartridge can be

found in Chapter 8, ‘CLARIS plus filter cartridge – Water for perfect

coffee’.

E

Perform the ‘Insert filter’ operation without interruption. This

will ensure that your IMPRESSA always produces its best.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears on the display.

g T Turn the Rotary Switch until FILTER I.P.W.S. is

displayed.

k T Press the Rotary Switch to enter the programme item.

FILTER NO

g T Turn the Rotary Switch until FILTER YES is displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

INSERT FILTER / PRESS BUTTON, the maintenance

button c lights up.

T Remove a CLARIS plus filter cartridge and the filter cartridge

extension from the Welcome Pack.

T Place the extension on top of the filter cartridge.

T Remove the water tank and empty it.

21


2 Preparing and using your IMPRESSA for the first time

T Lift the cartridge holder and insert the filter cartridge into

the water tank, applying slight pressure.

T Close the cartridge holder. It will click into place audibly.

T Fill the water tank with fresh, cold water and reinsert.

T Place a receptacle (containing at least 500 ml) under the

cappuccino nozzle.

T Turn the selection lever of the nozzle to the steam position n.

c T Press the maintenance button.

FILTER RINS., water will flow out of the nozzle.

E

E

You can interrupt filter rinsing at any time by pressing any

button.

The water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

Filter rinsing stops automatically after approx. 500 ml.

COFFEE READY appears on the display. The filter is now

activated.

Assessing and setting

water hardness

The harder the water is, the more frequently the IMPRESSA needs to

be descaled. It is therefore important to adjust the water hardness.

The water hardness can be adjusted on a continuous scale between

1° dH and 30° dH. This can also be deactivated, which means that

the IMPRESSA will not let you know when it has to be descaled.

E

However, if you are using the CLARIS plus filter cartridge and

have activated it, you will not be able to adjust the water hardness.

You can find out what the water hardness is by using the Aquadur®

test strips supplied as standard.

T Hold the test strip briefly (for one second) under flowing

water. Shake off the water.

22


2 Preparing and using your IMPRESSA for the first time

T Wait for about one minute.

T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the

description on the packaging.

You can now adjust the water hardness.

Example: To change the water hardness from 16° dH to 25° dH,

proceed as follows:

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until HARDNESS 16° dH is

displayed.

k T Press the Rotary Switch to enter the programme item.

HARDNESS 16° dH

g T Turn the Rotary Switch until HARDNESS 25° dH is

displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

HARDNESS 25° dH

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY is shown on the display.

Adjusting grinder

You can adjust the grinder to suit the roast of your coffee.

Our recommendations:

Z

Z

Select a fine setting for a light roast.

Select a coarse setting for a darker roast.

CAUTION

If you adjust the fineness of grind when the grinder is not operating,

the grinding wheel could be damaged.

T Only adjust the fineness of grind when the grinder is running.

23


2 Preparing and using your IMPRESSA for the first time

Example: To change the fineness of grind during coffee preparation,

proceed as follows:

T Open the cover of the bean container.

T Place a cup under the coffee spout.

o T Press the Coffee button.

The grinder starts and 1 COFFEE appears on the display.

After this, the coffee strength is briefly displayed.

T Turn the grinding wheel to the desired position while the

grinder is running.

The coffee will be prepared and the fineness of grind is

adjusted.

Switching on

When the IMPRESSA is switched on, a prompt for the rinse operation

automatically appears which is initiated by pressing the maintenance

button c.

This setting can be changed in programming mode so that the

machine automatically activates the switch-on rinse (see Chapter 6

‘Permanent settings in programming mode – Rinses’).

Precondition: Your IMPRESSA is switched on at the power switch

and the On/Off button Q is illuminated (standby).

Q T Press the On/Off button to switch the IMPRESSA on.

WELCOME TO JURA

UNIT IS HEATING

PRESS RINSE, the maintenance button c lights up.

T Place a receptacle under the coffee spout.

c T Press the maintenance button.

The machine rinses itself, stopping automatically.

COFFEE READY appears on the display. Your IMPRESSA

is ready to use.

24


2 Preparing and using your IMPRESSA for the first time

Switching off

(Standby)

When you switch your IMPRESSA off, the spouts with which a coffee

speciality or milk have been prepared are rinsed.

T Place a receptacle under the coffee spout and the cappuccino

nozzle.

Q T Press the On/Off button.

E

When you prepare a milk product, but have not performed

cappuccino cleaning, CLEAN MILK SYSTEM appears

and the maintenance button lights up. For ten seconds you

can start the ‘Clean cappuccino nozzle’ procedure by pressing

the maintenance button c.

GOODBYE appears on the display, and the coffee spout is

rinsed.

RINSE LEFT SPOUT / PRESS BUTTON.

c T Press the maintenance button.

GOODBYE appears on the display, and the left coffee spout

is rinsed.

The IMPRESSA is switched off (standby mode), and the On/

Off symbol Q lights up.

E

When your IMPRESSA is switched off, a hissing noise may be

audible. This is normal and does not have any effect on the

machine.

25


3 Familiarising yourself with the control options

3 Familiarising yourself with the control options

With the IMPRESSA you can prepare an excellent coffee or milk speciality

at the touch of a button. You also have the option of adjusting

the coffee strength and temperature as well as the amount of water

to your personal taste.

This chapter will allow you to become familiar with all control

options with the aid of examples. To familiarise yourself with your

IMPRESSA, we recommend that you make a point of actively trying

the facilities described in this chapter. You will find this is well worthwhile.

Learn how to perform the following:

U

U

U

U

Preparation at the touch of a button

One-off settings before and during preparation

Adjusting the permanent amount of water to suit the cup

size

Permanent settings in programming mode

E

@

You can stop the machine at any time while a coffee or milk

speciality or hot water is being prepared. To do this, press any

button.

If you prefer to familiarise yourself with your IMPRESSA in a

fun way on the computer, the interactive Knowledge Builder

tutorial program can be found on the Internet at

www.jura.com.

Preparation at the

touch of a button

Prepare your favourite coffee speciality at the touch of a button.

All coffee specialities are prepared following this model at the touch

of a button.

26


3 Familiarising yourself with the control options

Preparing a coffee speciality

at the touch of a button

Preparing two coffee

specialities at the touch

of a button

One-off setting before

and during preparation

Example: Proceed as follows to prepare one espresso.

Precondition: COFFEE READY is shown on the display.

T Place an espresso cup under the coffee spout.

i T Press the Espresso button.

1 ESPRESSO and the coffee strength is displayed.

The pre-set amount of water flows into the cup and the

process stops automatically.

COFFEE READY is shown on the display.

Example: Proceed as follows to prepare two espressi.

Precondition: COFFEE READY is shown on the display.

T Place two espresso cups under the coffee spout.

i T Press the Espresso button twice (within two seconds).

2 ESPRESSI, the pre-set amount of water flows into the

cups.

Preparation stops automatically. COFFEE READY

appears on the display.

The coffee strength can be changed before preparation or during

the grinding operation.

The following coffee strengths can be selected for 1 ristretto,

1 espresso, 1 coffee, 1 special coffee, 1 cappuccino and 1 latte macchiato:

U

U

U

U

U

Xmild

Mild

Normal

Strong

Xstrong

E

The pre-set amount of water can be changed during the

brewing operation by turning the Rotary Switch.

One-off settings before and during coffee preparation always follow

this model. These settings are not saved.

27


3 Familiarising yourself with the control options

Changing the coffee

strength before preparation

Changing the amount of

water during preparation

Entering a permanent

setting for the amount

of water for a cup size

Example: Proceed as follows to prepare a strong cup of coffee.

Precondition: COFFEE READY is shown on the display.

T Place a cup under the coffee spout.

g T Turn the Rotary Switch until STRONG appears on the display.

o T Press the Coffee button for as long as STRONG is displayed.

1 COFFEE / STRONG.

The pre-set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

Example: Proceed as follows to prepare a 110 ML cup of coffee.

Precondition: COFFEE READY is shown on the display.

T Place a cup under the coffee spout.

o T Press the Coffee button.

The grinding operation starts. 1 COFFEE appears on the

display, and then the strength is shown.

g T Turn the Rotary Switch during the brewing operation until

110 ML is displayed.

The set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

It is easy to make permanent settings for the amount of water for all

coffee and milk specialities as well as hot water according to the cup

size. As in the following example, adjust the amount of water once.

Every time you prepare a drink in the future, this amount of water

will be dispensed.

The permanent settings for adapting the amount of water to to the

cup size for all coffee and milk specialities as well as hot water follow

this model.

Example: To enter permanent settings for the amount of water for

a ristretto, proceed as follows:

Precondition: COFFEE READY is shown on the display.

T Place an espresso cup under the coffee spout.

28


3 Familiarising yourself with the control options

u

u

u

E

T Press and hold the Ristretto button.

1 RISTRETTO and the coffee strength is displayed.

T Hold the Ristretto button down until ENOUGH? / PRESS

BUTTON appears.

T Release the Ristretto button.

Coffee preparation starts and the ristretto flows into the

cup.

T Press any button as soon as enough ristretto has flowed into

the cup.

Preparation stops automatically. CONFIRMED √ appears

briefly on the display. The set amount of water for a ristretto

is saved as a permanent value. COFFEE READY is shown

on the display.

You can alter these settings at any time by repeating the

above procedure.

Permanent settings in

programming mode

You can easily adjust your IMPRESSA to your personal coffee blends

and specialities. Simply by turning and pressing the Rotary Switch,

you can navigate through the easy-to-understand program steps

and make permanent settings.

You can make the following settings with the Rotary Switch:

Programme item Subitem Explanation

MAINTENANCE CAPPUCCINO

CLEANING,

FILTER CHANGE,

MACHINE CLEAN,

CAPPUCCINO

RINSING,

MACHINE DESCALE,

MACHINE RINSE

T Select the desired maintenance programme.

If no action is taken, programming

mode is exited automatically after approx.

five seconds.

PRODUCTS SELECT PRODUCT T Select your settings for the coffee and milk

specialities and hot water.

FILTER

I.P.W.S.

YES

NO

T Indicate whether you operate your

IMPRESSA with or without a CLARIS plus filter

cartridge.

29


3 Familiarising yourself with the control options

Programme item Subitem Explanation

HARDNESS

(is only displayed

when the filter is not

activated)

ENERGY ESM

NOT ACTIVE,

1° dH – 30° dH

SAVE NO,

SAVE LEVEL1,

SAVE LEVEL2

T Adjust the water hardness.

T Select an energy saving mode.

TIME --:-- T Set the time and weekday.

UNIT ON --:--

MTWTFSS

OFF AFTER

RINSES

RENAME

ABC...

LOGO

INFORMATION

DISPLAY

LANGUAGE

EXIT

NOT ACTIVE,

0.5 HRS – 15 HRS

START RINSE,

CAPPU. RINSE

PRODUCT NAME,

WELCOME MESSAGE,

CLOSING

UNIT,

TIME FORMAT

DEUTSCH

ENGLISH

FRANCAIS

ITALIANO

NL

T Set the switch-on and switch-off time

individually for each weekday.

T Set the number of hours after which the

IMPRESSA should switch off automatically.

T Set whether the switch-on rinse should

be started manually or automatically.

T Set whether the prompt for cappuccino

rinsing should be started immediately or 10

minutes after preparation of a milk speciality.

T Change the individual designations.

T Select a logo which is displayed when

the graphic display is not used for other

information.

T Keep track of all prepared coffee and milk

specialities and view the care status.

T Select the unit of the amount of water and

the time format.

T Select your language.

T Exit programming mode.

30


3 Familiarising yourself with the control options

Settings in programming mode always follow the same model.

Example: To change the strength of one espresso from NORMAL

to STRONG proceed as follows:

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until PRODUCTS is displayed.

k T Press the Rotary Switch to enter the programme item.

PRODUCTS / SELECT PRODUCT

E

E

Next select the product button for which you would like to

make settings. No coffee speciality is prepared during this

procedure.

To enter a setting for the double product, press the corresponding

button twice within a period of two seconds.

i T Press the Espresso button.

1 ESPRESSO / AMOUNT 60 ML

g T Turn the Rotary Switch until 1 ESPRESSO / NORMAL is

displayed.

k T Press the Rotary Switch to enter the programme item.

1 ESPRESSO / NORMAL

g T Turn the Rotary Switch until 1 ESPRESSO / STRONG

appears.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

1 ESPRESSO / STRONG

g T Turn the Rotary Switch until 1 ESPRESSO / EXIT is

displayed.

k T Press the Rotary Switch to exit the programme item.

PRODUCTS / SELECT PRODUCT

g T Turn the Rotary Switch until PRODUCTS / EXIT is displayed.

k T Press the Rotary Switch to exit the programme item.

PRODUCTS

31


3 Familiarising yourself with the control options

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

View information and

care status

Under the programme item INFORMATION you can query the

following information:

U Number of the prepared coffee and milk specialities and hot

water

U Care status and number of executed maintenance programmes

(cleaning, descaling, filter change)

U Number of performed cappuccino cleaning operations

Precondition: COFFEE READY is shown on the display.

k T Press the Rotary Switch until MAINTENANCE appears.

g T Turn the Rotary Switch until INFORMATION is displayed.

k T Press the Rotary Switch to enter the programme item.

TOTAL, the sum of all prepared coffee and milk specialities

is displayed.

g T Turn the Rotary Switch for further information.

E

The care status can also be displayed in addition to the number

of performed maintenance programmes. The bar shows the

current care status. When the bar is filled completely, your

IMPRESSA will request the respective maintenance programme.

k T Press the Rotary Switch to exit the programme item.

INFORMATION

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

32


3 Familiarising yourself with the control options

33


4 Recipes

4 Recipes

You can use your IMPRESSA to create coffee classics or extraordinary specialities in your home. You

can find additional coffee recipes online at www.jura.com.

Further information on how to operate your IMPRESSA can be found in Chapter 3, ‘Familiarising

yourself with the control options’.

Cappuzino

Ingredients

(for two people)

200 ml cold milk

2 strong Espressi

20 ml cinnamon syrup

Powdered cinnamon for decoration purposes

T

T

T

Distribute the cinnamon syrup into Cappuccino cups.

Place cup under the Professional Cappuccino Frother and half fill with milk foam.

Pour Espresso directly into the milk foam and sprinkle it with cinnamon powder.

Café Chocolat Blanc

Ingredients

(for two people)

50 g white chocolate

2 Espressi

200 ml milk

Grated white chocolate for decoration purposes

T

T

T

T

Froth milk in two decorative glasses with the Professional Cappuccino Frother.

Melt white chocolate in a bain marie.

Prepare two Espressi, stir with the melted chocolate and pour into the milk foam.

Sprinkle grated white chocolate over the drinks.

34


4 Recipes

35


4 Recipes

36


4 Recipes

37


4 Recipes

38


4 Recipes

Winter’s dream coffee

Ingredients

(for two people)

2 strong Espressi

200 ml of hot cocoa

1 pinch of gingerbread seasoning

100 ml milk

Sugar to suit personal taste

1-2 gingerbread cakes for decoration

T

T

T

T

Prepare 2 Espressi.

Stir Espresso with cocoa and gingerbread seasoning and distribute into two glasses.

Froth the milk and add to the Espressos.

Sprinkle with small pieces of gingerbread.

Latte Macchiato Frio

Ingredients

(for two people)

2 cold Espressi

200 ml cold milk

1 small cup crushed ice

20 ml maple syrup

Milk foam

T

T

T

Prepare Espresso and allow to cool.

Put cold milk, the maple syrup and crushed ice in a glass and mix.

Add the cold Espresso.

39


5 Preparation at the touch of a button

5 Preparation at the touch of a button

In this chapter you will find out how to prepare coffee specialities,

milk and hot water without making further settings.

Chapter 3, ‘Familiarising yourself with the control options’, will teach

you how to adjust the settings to your personal preferences. Alternatively,

you can use Chapter 6, ‘Permanent settings in programming

mode’.

E

E

You can stop the machine at any time while a coffee or milk

product or hot water is being prepared. To do this, press any

button.

During preparation, you can change the set amount by turning

the Rotary Switch.

@

You can also try out the preparation of coffee specialities

online. Visit the Knowledge Builder at www.jura.com.

Barista tips

A ‘barista’ is someone who is a professional at preparing espresso

and coffee. The barista knows every coffee speciality and is a master

at preparing perfect beverages. In conjunction with your JURA

IMPRESSA, you too can achieve perfect results.

In addition to the simple preparation at the touch of a button, you

can also adapt the coffee or espresso to suit your own individual

taste. Various setting options are provided to this purpose. Give it a

try:

Z Coffee strength: The coffee strength can be changed before

preparation or during the grinding operation by turning the

Rotary Switch. This setting changes the coffee powder quantity.

The larger the quantity of coffee powder which is used to

make the coffee, the stronger and more intensive the coffee

speciality will taste.

Z Fineness of grind: In the IMPRESSA the coffee beans are

freshly ground each time a coffee speciality is prepared. The

fineness of grind can be adjusted during the grinding opera-

40


5 Preparation at the touch of a button

Z

Z

tion. Select a finer grind for espresso than for coffee. The fineness

of grind affects the time the water requires to run through

the coffee powder. A finer coffee powder prolongs the extraction

time so that the maximum aroma is unfolded when

espresso is prepared.

Temperature: In programming mode on the IMPRESSA you

can adjust the temperature of the coffee specialities. The

temperature can affect the taste of the coffee and must be

adapted to suit individual tastes and the type of coffee bean.

Height-adjustable coffee spout: The height of the coffee

spout can be adjusted on a sliding scale as required to suit the

size of your coffee cups. The distance between the coffee

spout and the edge of the cup should be as small as possible.

This prevents coffee splashing on the machine and produces

a fine, thick crema.

In addition remember the following barista tips:

Z Store your coffee in a dry place. Oxygen, light, heat and moisture

will spoil the coffee.

Z Use only fresh, cold water so that the coffee aroma can optimally

unfold.

Z To enjoy perfect coffee, please change the water every day.

Z Pre-heat your cups.

Z Use a teaspoon for sugar and do not use sugar lumps to

ensure that the crema or milk foam are not spoilt.

Ristretto

Example: This is how to prepare a ristretto.

T Place an espresso cup under the coffee spout.

u T Press the Ristretto button.

1 RISTRETTO and the coffee strength is then briefly

displayed.

The pre-set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

41


5 Preparation at the touch of a button

Espresso

The classic coffee drink from Italy. There is a definite crema on the

surface of the espresso.

Example: This is how to prepare an espresso.

T Place an espresso cup under the coffee spout.

i T Press the Espresso button.

1 ESPRESSO and the coffee strength is then briefly

displayed.

The pre-set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

Coffee

Special coffee

Cappuccino

Example: This is how to prepare a coffee.

T Place a cup under the coffee spout.

o T Press the Coffee button.

1 COFFEE and the coffee strength is then briefly displayed.

The pre-set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

Example: This is how to prepare a special coffee.

T Place a cup under the cappuccino nozzle.

e T Press the Special Coffee button.

1 SPECIAL and the coffee strength is then briefly

displayed.

The pre-set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

A classic Italian recipe. The finishing touch for the cappuccino is a

sprinkling of cocoa powder.

Example: This is how to prepare a cappuccino.

Precondition: COFFEE READY is shown on the display.

T Remove the milk pipe from the packaging of the vacuum

milk container. For a milk carton/bottle use the long pipe, for

the vacuum milk container the short pipe.

42


5 Preparation at the touch of a button

T Attach the milk pipe to the nozzle.

T Insert the other end in a milk carton/bottle or connect it to

the vacuum milk container.

T Place a cup under the cappuccino nozzle.

T Turn the selection lever of the nozzle to the milk foam position

p.

p T Press the Cappuccino button.

1 CAPPUCCINO and the coffee strength is displayed.

1 CAPPUCCINO / MILK, the milk foam is being prepared.

The operation stops automatically after reaching the pre-set

amount of milk.

1 CAPPUCCINO

1 CAPPUCCINO / COFFEE, coffee preparation starts.

Preparation stops automatically after reaching the pre-set

amount of water. COFFEE READY is shown on the

display.

To ensure that the cappuccino nozzle works perfectly, you should

rinse and clean it regularly. The description for this can be found in

Chapter 7 ‘Maintenance – Cappuccino nozzle’.

Latte macchiato

Your IMPRESSA prepares a latte macchiato at the touch of a

button.

Example: This is how to prepare a latte macchiato.

Precondition: COFFEE READY is shown on the display.

T Remove the milk pipe from the packaging of the vacuum

milk container. For a milk carton/bottle use the long pipe, for

the vacuum milk container the short pipe.

T Attach the milk pipe to the nozzle.

T Insert the other end in a milk carton/bottle or connect it to

the vacuum milk container.

43


5 Preparation at the touch of a button

T Place a glass under the cappuccino nozzle.

T Turn the selection lever of the nozzle to the milk foam

position p.

E

E

To enable the typical layers of a Latte Macchiato to form even

more effectively, add 10 ml of cool milk to the glass before

preparing this speciality.

You can refine your Latte Macchiato even more by also adding

a little flavoured syrup to the glass as well.

q T Press the Latte Macchiato button.

1 LATTE MAC. and the coffee strength is displayed.

1 LATTE MAC. / MILK, the milk foam is being prepared.

The operation stops automatically after reaching the pre-set

amount of milk.

1 LATTE MAC.

E

A brief interval follows during which the hot milk separates

from the milk foam. This enables the formation of the typical

layers of a latte macchiato. The duration of this interval can be

defined in programming mode.

1 LATTE MAC. / COFFEE, coffee preparation starts.

Preparation stops automatically after reaching the pre-set

amount of water. COFFEE READY is shown on the

display.

To ensure that the cappuccino nozzle works perfectly, you should

rinse and clean it regularly. The description for this can be found in

Chapter 7 ‘Maintenance – Cappuccino nozzle’.

44


5 Preparation at the touch of a button

Pre-ground coffee

You can choose a second coffee blend with the filler funnel for preground

coffee.

E

E

E

E

Never add more than two level measuring spoons of preground

coffee.

Use pre-ground coffee which is not ground too finely. Very

fine coffee can block up the system so that the coffee only

comes out in drips.

If you did not fill the machine with a sufficient amount of preground

coffee, PRE-GROUND / NOT ENOUGH is displayed

and the IMPRESSA stops operation.

The desired coffee speciality must be prepared within approx.

one minute after filling with the pre-ground coffee. Otherwise,

the IMPRESSA stops the operation and is ready to use

again.

All coffee specialities with pre-ground coffee are prepared following

this model.

Example: This is how to prepare a cup of coffee using pre-ground

coffee.

T Place a cup under the coffee spout.

T Open the cover of the bean container.

T Open the cover for pre-ground coffee.

PRE-GROUND / FILL POWDER

T Place one level measuring spoon of pre-ground coffee into

the filler funnel.

T Close the cover for pre-ground coffee.

PRE-GROUND / SELECT PRODUCT

o T Press the Coffee button.

1 COFFEE, coffee preparation starts.

The pre-set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

45


5 Preparation at the touch of a button

Hot milk

Precondition: COFFEE READY is shown on the display.

T Remove the milk pipe from the packaging of the vacuum

milk container. For a milk carton/bottle use the long pipe, for

the vacuum milk container the short pipe.

T Attach the milk pipe to the nozzle.

T Insert the other end in a milk carton/bottle or connect it to

the vacuum milk container.

T Place a cup under the cappuccino nozzle.

T Turn the selection lever of the nozzle to the milk position

t.

z T Press the Milk button.

1 MILK, the hot milk flows into the cup.

The operation stops automatically after reaching the pre-set

amount of milk. COFFEE READY is shown on the

display.

To ensure that the cappuccino nozzle works perfectly, you should

rinse and clean it regularly. The description for this can be found in

Chapter 7 ‘Maintenance – Cappuccino nozzle’.

Hot water

The following temperatures can be selected for preparing hot

water:

Z

Z

Z

Low

Normal

High

CAUTION

There is a danger of scalding from hot water splashes.

T Avoid direct contact with skin.

Precondition: COFFEE READY is shown on the display.

T Place a cup under the hot water spout.

m T Press the Hot water button.

HOT WATER and the temperature is displayed.

E

By pressing the hot water button several times (within approx.

2 seconds) you can set the temperature to your individual

preference. This setting is not saved.

46


5 Preparation at the touch of a button

The pre-set amount of water flows into the cup. Preparation

stops automatically. COFFEE READY appears on the

display.

47


6 Permanent settings in programming mode

6 Permanent settings in Programming mode

Products

With the PRODUCTS programme item you can enter individual

settings for all coffee products, milk, hot water and coffee-milk

products.

Settings for coffee products,

milk and hot water

The following permanent settings can be entered for coffee

products, milk and hot water:

Product Temp. Coffee strength Amount

1 Ristretto LOW, NORMAL, HIGH XMILD, MILD,

NORMAL, STRONG,

XSTRONG

15 ML – 240 ML

2 Ristretti LOW, NORMAL, HIGH – 15 ML – 240 ML

(per cup)

1 Espresso LOW, NORMAL, HIGH XMILD, MILD,

NORMAL, STRONG,

XSTRONG

15 ML – 240 ML

2 Espressi LOW, NORMAL, HIGH – 15 ML – 240 ML

(per cup)

1 Coffee LOW, NORMAL, HIGH XMILD, MILD,

NORMAL, STRONG,

XSTRONG

15 ML – 240 ML

2 Coffees LOW, NORMAL, HIGH – 15 ML – 240 ML

(per cup)

1 Special

coffee

2 Special

coffees

LOW, NORMAL, HIGH XMILD, MILD,

NORMAL, STRONG,

XSTRONG

15 ML – 240 ML

LOW, NORMAL, HIGH – 15 ML – 240 ML

(per cup)

1 Milk – – 3 SEC – 120 SEC

2 Milk – – 3 SEC – 240 SEC

Hot water LOW, NORMAL, HIGH – 15 ML – 450 ML

48


6 Permanent settings in programming mode

E

For 1 milk and 1 special coffee you can also select whether the

preparation of 2 milks or 2 special coffees should be doable or

not doable.

Settings for

coffee-milk-products

The following permanent settings can be entered for coffee-milk

products:

Product Temp. Coffee strength Amount

1 Cappuccino LOW, NORMAL,

HIGH

XMILD, MILD,

NORMAL,

STRONG,

XSTRONG

Amount of milk:

3 SEC – 120 SEC

Pause: 0 SEC – 60 SEC

Amount of water:

15 ML – 240 ML

2 Cappuccini LOW, NORMAL,

HIGH

– Amount of milk:

3 SEC – 240 SEC

Pause: 0 SEC – 60 SEC

Amount of water:

15 ML – 240 ML

(per cup)

1 Latte

Macchiato

LOW, NORMAL,

HIGH

XMILD, MILD,

NORMAL,

STRONG,

XSTRONG

Amount of milk:

3 SEC – 120 SEC

Pause: 0 SEC – 60 SEC

Amount of water:

15 ML – 240 ML

2 Latte

Macchiati

LOW, NORMAL,

HIGH

– Amount of milk:

3 SEC – 240 SEC

Pause: 0 SEC – 60 SEC

Amount of water:

15 ML – 240 ML

(per cup)

E

For 1 cappuccino and 1 latte macchiato you can also select

whether the preparation of 2 cappuccini or 2 latte macchiati

should be doable or not doable.

49


6 Permanent settings in programming mode

Permanent settings in programming mode always follow the same

model.

Example: Proceed as follows to change the amount of milk of

1 latte macchiato from 16 SECS to 20 SECS, the pause from

30 SEC to 40 SEC and the amount of water from 45 ML to

40 ML.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until PRODUCTS is displayed.

k T Press the Rotary Switch to enter the programme item.

PRODUCT / SELECT PRODUCT

E

E

Next select the product button for which you would like to

make settings. No product is prepared during this procedure.

To change a setting for a double product, press the corresponding

button twice within a period of two seconds.

50

q T Press the Latte Macchiato button.

1 LATTE MAC. / AMOUNT 45 ML

k T Press the Rotary Switch to enter the programme item.

1 LATTE MAC. / AMOUNT 45 ML

g T Turn the Rotary Switch until 1 LATTE MAC. / AMOUNT

40 ML is displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

1 LATTE MAC. / AMOUNT 40 ML

g T Turn the Rotary Switch until 1 LATTE MAC. / MILK

16 SECS is displayed.

k T Press the Rotary Switch to enter the programme item.

1 LATTE MAC. / MILK 16 SECS

g T Turn the Rotary Switch until 1 LATTE MAC. / MILK

20 SECS is displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display.

1 LATTE MAC. / MILK 20 SECS


6 Permanent settings in programming mode

g T Turn the Rotary Switch until 1 LATTE MAC. / PAUSE

30 SEC is displayed.

k T Press the Rotary Switch to enter the programme item.

1 LATTE MAC. / PAUSE 30 SEC

g T Turn the Rotary Switch until 1 LATTE MAC. / PAUSE

40 SEC is displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display.

1 LATTE MAC. / PAUSE 40 SEC

g T Turn the Rotary Switch until 1 LATTE MAC. / EXIT is

displayed.

k T Press the Rotary Switch to exit the programme item.

PRODUCT / SELECT PRODUCT

g T Turn the Rotary Switch until PRODUCT / EXIT is displayed.

k T Press the Rotary Switch to exit the programme item.

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

Energy-save mode

You can also set various energy saving modes on your IMPRESSA:

Z ENERGY SAVE NO

U Your IMPRESSA is continuously ready for use.

U All coffee and milk products, as well as hot water, can be

prepared without having to wait.

Z ENERGY SAVE LEVEL1

U Your IMPRESSA is only continuously ready for use for coffee

products.

U The machine has to heat up for milk preparation.

Z ENERGY SAVE LEVEL2

U Approx. 5 minutes after the last preparation the IMPRESSA

switches to the energy-saving temperature and is not ready

for use.

U Before coffee, hot water or milk can be prepared, the machine

has to heat up.

51


6 Permanent settings in programming mode

Example: Proceed as follows to change the energy saving mode

from ENERGY SAVE NO to ENERGY LEVEL1.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE is

displayed.

g T Turn the Rotary Switch until ENERGY ESM is displayed.

k T Press the Rotary Switch to enter the programme item.

ENERGY SAVE NO

g T Turn the Rotary Switch until ENERGY SAVE LEVEL1

is displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

ENERGY ESM

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

Time and weekday

You already set the time and weekday when you used the machine

for the first time.

Example: To change the time from 08:45 to 09:50, proceed

as follows.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until TIME 08:45 is displayed.

k T Press the Rotary Switch to enter the programme item.

TIME HOURS 08:45.

g T Turn the Rotary Switch until TIME HOURS 09:45 is

displayed.

k T Press the Rotary Switch to confirm the hour setting.

g T Turn the Rotary Switch until TIME MINUTES 09:50

is displayed.

k T Press the Rotary Switch to confirm the minute setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

WEEKDAY MONDAY (Example)

52


6 Permanent settings in programming mode

k T Press the Rotary Switch to confirm the weekday setting.

CONFIRMED √ appears briefly on the display.

TIME 09:50

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

Programmable

Switch-on time

The programmable switch-on time can only be set when the time

has been set.

The following settings can be made in the UNIT ON menu item:

Z UNIT ON

U Set the required switch-on time.

Z MACHINE OFF

U Set the required switch-off time.

Z DAY

U Set the weekdays on which IMPRESSA should switch on and

off automatically.

E

The programmable switch-on only works when the machine

is switched on at the power switch (standby).

Example: Proceed as follows to set the programmable switch-on

time to 07:30 and stipulate that your IMPRESSA does not switch

on automatically on Sundays.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until UNIT ON / --:--

MTWTFSS is displayed.

k T Press the Rotary Switch to enter the programme item.

UNIT ON --:--.

k T Press the Rotary Switch to enter the programme item.

UNIT ON / HOURS --:--

g T Turn the Rotary Switch until UNIT ON / HOURS 07:00

is displayed.

k T Press the Rotary Switch to confirm the hour setting.

53


6 Permanent settings in programming mode

g T Turn the Rotary Switch until UNIT ON / MINUTES

07:30 is displayed.

k T Press the Rotary Switch to confirm the minute setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

UNIT ON 07:30

g T Turn the Rotary Switch until DAY is displayed.

k T Press the Rotary Switch to enter the programme item.

DAY / MON YES

g T Turn the Rotary Switch until TAG / SUN YES is displayed.

k T Press the Rotary Switch to enter the programme item.

DAY / SUN YES

g T Turn the Rotary Switch until TAG / SUN NO is displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display.

DAY / SUN NO

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit the programme item.

DAY

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit the programme item.

UNIT ON / 07:30 MTWTFSn

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

Automatic switch-off

By instructing your IMPRESSA to automatically switch itself off, you

can cut down your energy consumption. If this function is activated,

your IMPRESSA switches off automatically after the last action on

the machine.

E

The automatic switch-off time can be adjusted between 0.5

and 15 hours or deactivated.

54


6 Permanent settings in programming mode

Example: Proceed as follows to change the automatic switch-off

time from 5 HRS to 2 HRS.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until OFF AFTER 5 HRS is

displayed.

k T Press the Rotary Switch to enter the programme item.

OFF AFTER 5 HRS

g T Turn the Rotary Switch until OFF AFTER 2 HRS is

displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

OFF AFTER 2 HRS

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

Rinses

You can set whether the switch-on rinse should be started

manually or automatically.

You can set whether cappuccino rinsing should be prompted immediately

or 10 minutes after a milk product has been prepared.

Example: Proceed as follows to programme that cappuccino rinsing

should be prompted immediately after a milk product has been

prepared.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until RINSES is displayed.

k T Press the Rotary Switch to enter the programme item.

START RINSE MANUAL

g T Turn the Rotary Switch until CAPPU. RINSE AFTER

10 MIN is displayed.

k T Press the Rotary Switch to enter the programme item.

CAPPU. RINSE AFTER 10 MIN

55


6 Permanent settings in programming mode

g T Turn the Rotary Switch until CAPPU. RINSE NOW is

displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

CAPPU. RINSE NOW

g T Turn the Rotary Switch until RINSES EXIT is displayed.

k T Press the Rotary Switch.

RINSES

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

Unit amount of water/

time format

You can change the unit of the amount of water from ‘ml’ to ‘oz’ and

the time format to ‘24 HRS’ or ‘AM/PM’ .

Example: To change the unit for the amount of water from UNIT

ML to UNIT OZ, proceed as follows.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until SETTINGS is displayed.

k T Press the Rotary Switch to enter the programme item.

SETTINGS UNIT

E

To change the time format, turn the Rotary Switch until

SETTINGS TIME FORMAT is displayed.

k T Press the Rotary Switch to enter the programme item.

SETTINGS UNIT ML

g T Turn the Rotary Switch until SETTINGS UNIT OZ is

displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

SETTINGS UNIT

56


6 Permanent settings in programming mode

g T Turn the Rotary Switch until SETTINGS EXIT is displayed.

k T Press the Rotary Switch to exit the programme item.

DISPLAY

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

Logo

You can choose various logos which appear when the display is not

used for other information. The following logos can, for example, be

selected:

Z

Z

Z

Z

JURA Logo

Animated coffee cup

Time

No logo

Example: Proceed as follows to show the time on the display.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the Rotary Switch until LOGO is displayed.

k T Press the Rotary Switch to enter the programme item.

LOGO

g T Turn the Rotary Switch until LOGO 08:45 (example) is

displayed.

k T Press the Rotary Switch to confirm the setting.

CONFIRMED √ appears briefly on the display to confirm

the setting.

LOGO 08:45 (example)

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY / 08:45

57


6 Permanent settings in programming mode

Language

You set the language when you used the machine for the first

time.

You can choose among the following languages.

Z

Z

Z

Z

Z

German

English

French

Italian

Dutch

Example: To change the language from ENGLISH to DEUTSCH,

proceed as follows.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE is

displayed.

g T Turn the Rotary Switch until LANGUAGE ENGLISH is

displayed.

k T Press the Rotary Switch to enter the programme item.

LANGUAGE ENGLISH

g T Turn the Rotary Switch until SPRACHE DEUTSCH

appears.

k T Press the Rotary Switch to confirm the setting.

GESPEICHERT √ appears briefly on the display to

confirm the setting.

SPRACHE DEUTSCH

g T Turn the Rotary Switch until EXIT is displayed.

k T Press the Rotary Switch to exit programming mode.

BITTE WÄHLEN

Rename

All product names as well as the on message and closing can be

changed.

Example: To change the product name from 1 COFFEE to

MY COFFEE, proceed as follows:

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

58


6 Permanent settings in programming mode

g T Turn the Rotary Switch until RENAME ABC... is displayed.

k T Press the Rotary Switch to enter the programme item.

RENAME PRODUCT NAME

E

The welcome text and closing can be selected by turning the

Rotary Switch.

k T Press the Rotary Switch to enter the programme item.

PRODUCT NAME CHANGE

k T Press the Rotary Switch.

PRODUCT NAME / SELECT PRODUCT

E

Next select the button of the product which you would like to

rename. No product is prepared during this procedure.

o T Press the Coffee button.

j / ABCDEFG...√

g T Turn the Rotary Switch so that it points to the correct

character.

k T Press the Rotary Switch to confirm the character.

MY COFFEE / ABCDEFG...√

E

To delete the character which was entered last, select the

character at the end of the alphabet and press the Rotary

Switch.

k T Select the character √ at the end of the alphabet and press

the Rotary Switch to confirm the entry.

CONFIRMED √ appears briefly on the display.

RENAME ABC...

g T Turn the Rotary Switch until EXIT appears on the display.

k T Press the Rotary Switch to exit programming mode.

COFFEE READY

59


7 Maintenance

7 Maintenance

Your IMPRESSA has the following integrated maintenance programmes:

Z

Z

Z

Z

Z

Z

Rinse machine

Filter change

Clean machine

Descale machine

Rinse cappuccino nozzle

Clean cappuccino nozzle

E

Clean or descale the machine or change the filter whenever

the appropriate indicator lights up.

Maintenance tips

To ensure that you get many years’ reliable service out of your

IMPRESSA and to guarantee the optimum coffee quality, the

machine requires daily maintenance.

You should proceed as follows:

Z Empty the coffee grounds container and the drip tray. Rinse

them with warm water.

Z Rinse the water tank with clean water.

Z Dismantle and rinse the cappuccino nozzle (see Chapter 7,

‘Maintenance – Rinsing the cappuccino nozzle’)

Z Wipe the surface of the machine with a damp cloth.

Rinse machine

When the IMPRESSA is switched on, a prompt to perform a rinse

operation appears after heating, or this is automatically started.

It can be set in programming mode whether the switch-on rinse

needs to be activated manually or whether the machine automatically

activates the switch-on rinse (see Chapter 6 ‘Permanent settings

in programming mode – Rinses’).

When the IMPRESSA is switched off, a rinse operation is automatically

initiated.

You can initiate the rinse operation manually at any time.

60


7 Maintenance

Precondition: COFFEE READY is shown on the display.

T Place a receptacle under the coffee spout.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

k T Press the Rotary Switch to enter the programme item.

CAPPUCCINO CLEANING

g T Turn the Rotary Switch until MACHINE RINSING

appears.

k T Press the Rotary Switch to initiate the rinse operation.

RINSING

Rinsing stops automatically and your IMPRESSA is then

ready for use.

Changing the filter

E

E

After 50 litres of water have flowed through the filter, or after

two months, its capacity is reached. Your IMPRESSA will automatically

prompt you to change the filter.

If the CLARIS plus filter cartridge is not activated, you will not

be prompted to change the filter.

@

You can also try out ‘changing the filter’ online. Visit the

Knowledge Builder at www.jura.com.

Change following a prompt

To change the CLARIS plus filter cartridge when prompted to do so

by your IMPRESSA, proceed as follows:

Precondition: COFFEE READY / FILTER CHANGE is displayed

and the maintenance button c lights up.

c T Press the maintenance button.

CHANGE TIME 2 MIN / START YES

E

If you want to change the filter at a later point in time, turn the

Rotary Switch until CHANGE / START NO is displayed. Exit

the maintenance programme by pressing the Rotary Switch.

The prompt ‘change filter’ remains on the display.

61


7 Maintenance

c T Press the maintenance button.

INSERT FILTER / PRESS BUTTON

T Remove the water tank and empty it.

T Open up the cartridge holder and remove the old CLARIS

plus filter cartridge and the extension piece.

T Fit the extension on top of a new CLARIS plus filter cartridge.

T Insert the filter cartridge into the water tank, exerting slight

pressure.

T Close the cartridge holder. It will click into place audibly.

T Fill the water tank with fresh, cold water and reinsert.

T Place a receptacle (containing at least 500 ml) under the

cappuccino nozzle.

T Turn the selection lever of the nozzle to the steam position

n.

c T Press the maintenance button.

FILTER RINS., water flows from the nozzle.

E

E

You can interrupt filter rinsing at any time. To do this, press

any button.

The water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

Filter rinsing stops automatically after approx. 500 ml. Your

IMPRESSA heats up and is once again ready to use.

Manual filter change

You can initiate the ‘Changing the filter’ operation manually.

Precondition: The filter is activated and COFFEE READY

appears on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

k T Press the Rotary Switch to enter the programme item.

CAPPUCCINO CLEANING

62


7 Maintenance

g T Turn the Rotary Switch until FILTER CHANGE is displayed.

k T Press the Rotary Switch.

CHANGE TIME 2 MIN / START YES

T Continue with the second prompt to take action (indicated

by a T), as is described under ‘Replacement following a

prompt’.

Clean machine

CAUTION

After 220 coffee preparations or 80 switch-on rinses, the IMPRESSA

will prompt you to clean it.

If the wrong cleaning agent is used, the machine could be damaged

and/or traces of detergent could be left behind in the water.

T Use only original JURA care products.

E

E

E

The cleaning programme only lasts about 20 minutes.

Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so.

JURA cleaning tablets are available from stockists.

@

You can also try out the ‘clean machine’ operation online.

Visit the Knowledge Builder at www.jura.com.

Cleaning following a

prompt

Precondition: COFFEE READY / CLEAN is displayed and the

maintenance button c lights up.

c T Press the maintenance button.

CLEANING TIME 20 MIN / START YES

E

If you want to clean the machine at a later point in time, turn

the Rotary Switch until CLEANING / START NO is displayed.

Exit the maintenance programme by pressing the

Rotary Switch. The prompt ‘clean machine’ remains on the

display.

c T Press the maintenance button.

TRAY / GROUNDS EMPTY

T Empty the drip tray and coffee grounds container and put

them back into the machine.

63


7 Maintenance

PRESS BUTTON, the maintenance button c lights up.

T Place a receptacle under the coffee spout and the cappuccino

nozzle.

c T Press the maintenance button.

MACHINE IS CLEANING, water flows out of the

coffee spout.

The process is interrupted, ADD TABLET.

T Open the cover of the bean container.

T Open the cover of the filler funnel for pre-ground coffee.

T Insert a JURA cleaning tablet into the filler funnel.

T Close the cover of the filler funnel and the cover of the bean

container.

PRESS BUTTON, the maintenance button c lights up.

c T Press the maintenance button.

MACHINE IS CLEANING, water flows out of the

coffee spout and the cappuccino nozzle several times.

The process is interrupted TRAY / GROUNDS EMPTY.

T Empty the drip tray and coffee grounds container and put

them back into the machine.

The cleaning operation is now complete. The IMPRESSA is

once more ready for use.

Manual cleaning

You can initiate the ‘Cleaning the machine’ operation manually.

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

k T Press the Rotary Switch to enter the programme item.

CAPPUCCINO CLEANING

g T Turn the Rotary Switch until MACHINE CLEAN is displayed.

k T Press the Rotary Switch.

CLEANING TIME 20 MIN / START YES

T Continue with the second prompt to take action (indicated

by a T), as is described under ‘Cleaning following a prompt’.

64


7 Maintenance

Descale machine

The IMPRESSA builds up deposits of limescale over time and automatically

prompts you to descale it when necessary. The degree of

calcification depends on the degree of hardness of your water.

CAUTION

If the descaling agent comes into contact with the skin or eyes, this

can cause irritation.

T

T

Avoid contact with the skin or eyes.

Rinse the descaling agent off with clean water. Should you get

any descaling agent in your eye, consult a doctor.

CAUTION

If the wrong descaling agent is used, the machine could be damaged

and/or traces of detergent could be left behind in the water.

T Use only original JURA care products.

CAUTION

If the descaling operation is interrupted, there may be damage to

the machine.

T Allow the descaling programme to run to the end.

CAUTION

If the descaling agent comes into contact with sensitive surfaces,

damage may occur.

T Clean up any splashes immediately.

E

E

E

The descaling programme lasts approx. 45 minutes.

JURA descaling tablets are available from stockists.

If you use a CLARIS plus filter cartridge and this is activated,

you will not be prompted to change the filter.

@

You can also try out the ‘Descaling the machine’ operation

online. Visit the Knowledge Builder at www.jura.com.

Descaling following a

prompt

Precondition: COFFEE READY / DESCALE is displayed and

the maintenance button c lights up.

c T Press the maintenance button.

DECALCIFYING TIME 45 MIN / START YES

65


7 Maintenance

E

If you want to descale the machine at a later point in time, turn

the Rotary Switch until DECALCIFYING / START NO

is displayed. Exit the maintenance programme by pressing

the Rotary Switch. The prompt ‘Descale machine’ remains on

the display.

c T Press the maintenance button.

TRAY / GROUNDS EMPTY

T Empty the drip tray and coffee grounds container and put

them back into the machine.

SOLVENT IN TANK

T Remove the water tank and empty it.

T Completely dissolve the contents of one blister (3 JURA

descaling tablets) in a container that holds 600 ml of water.

This may take several minutes.

T Pour the solution into the empty water tank and insert it in

the machine.

SOLVENT IN TANK / PRESS BUTTON, the maintenance

button c lights up.

T Remove the cappuccino nozzle.

T Place a receptacle under the hot water spout and the connector

of the nozzle.

c T Press the maintenance button.

MACHINE IS DECALCIFYING

Water flows from the hot water spout and the connector of

the nozzle. The maintenance button c blinks during the

descaling operation.

The process stops automatically, TRAY / GROUNDS

EMPTY.

T Empty the receptacles below the hot water spout and the

connector of the nozzle.

T Empty the drip tray and coffee grounds container and put

them back into the machine.

WATER TANK FILL

T Remove the water tank and rinse it thoroughly.

T Fill the water tank with fresh, cold mains water and reinsert.

PRESS BUTTON, the maintenance button c lights up.

66


7 Maintenance

T Replace the cappuccino nozzle.

T Place a receptacle under the hot water and coffee spout and

the cappuccino nozzle.

c T Press the maintenance button.

MACHINE IS DECALCIFYING, water flows out of

the hot water spout and the cappuccino nozzle.

UNIT IS HEATING, RINSING water flows out of

the coffee spout.

The process stops automatically, TRAY / GROUNDS

EMPTY.

T Empty the drip tray and coffee grounds container and put

them back into the machine.

The descaling operation is now complete. Your IMPRESSA

heats up and is once again ready to use.

E

If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

Manual descaling

You can initiate the operation ‘Descaling the machine’ manually.

Precondition: COFFEE READY appears on the display and the

filter is not activated.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

k T Press the Rotary Switch to enter the programme item.

CAPPUCCINO CLEANING

g T Turn the Rotary Switch until DESCALE MACHINE is

displayed.

k T Press the Rotary Switch.

DECALCIFYING TIME 45 MIN / START YES

T Continue with the second prompt to take action (indicated

by a T), as is described under ‘Descaling following a

prompt’.

67


7 Maintenance

Rinsing the

cappuccino nozzle

Each time milk has been prepared the IMPRESSA displays a prompt

for cappuccino rinsing.

It can be set in programming mode whether the rinsing prompt is

displayed immediately or 10 minutes after preparation (refer to

Chapter 6 ‘Permanent settings in programming mode – Rinses’).

Rinsing the cappuccino

nozzle after prompt

Cleaning the

cappuccino nozzle

CAUTION

Precondition: COFFEE READY / CAPPU. RINSING is

shown on the display, the maintenance button c lights up.

T Place a receptacle under the cappuccino nozzle.

T Turn the selection lever of the nozzle to the steam position

n.

c T Press the maintenance button.

CAPPUCCINO RINSING, the cappuccino nozzle is

rinsed.

Preparation stops automatically. COFFEE READY

appears on the display.

To ensure that the cappuccino nozzle works perfectly, you should

clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged

and/or traces of detergent could be left behind in the water.

T Use only original JURA care products.

E

E

@

The IMPRESSA will not prompt you to clean the cappuccino

nozzle.

The JURA Auto-Cappuccino Cleaner is available from stockists.

You can also try out the ‘Cleaning the cappuccino nozzle’

operation online. Visit the Knowledge Builder at

www.jura.com.

68


7 Maintenance

Starting cappuccino

cleaning manually

Cleaning the cappuccino

nozzle after prompt

Precondition: COFFEE READY is shown on the display.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

k T Press the Rotary Switch to enter the programme item.

CAPPUCCINO CLEANING

k T Press the Rotary Switch.

CLEANER FOR CAPPUCCINO / PRESS BUTTON

T Pour 250 ml of fresh water into a container and add one

capful (max. 15 ml) of Auto-Cappuccino Cleaner.

T Immerse the milk pipe in the receptacle.

T Turn the selection lever to the milk foam position p or

milk t.

T Place another receptacle under the cappuccino nozzle.

c T Press the maintenance button.

CAPPUCCINO CLEANING, the nozzle and pipe are

cleaned.

WATER FOR CAPPUCCINO / PRESS BUTTON

T Rinse the receptacle thoroughly, fill it with approx. 250 ml

of fresh water and immerse the milk pipe in the water.

T Empty the receptacle and place it under the nozzle once

more.

c T Press the maintenance button.

CAPPUCCINO CLEANING, the nozzle and pipe are

rinsed with fresh water.

COFFEE READY appears on the display. Your IMPRESSA

is once more ready to use.

If milk has been prepared, but the cappuccino nozzle has not been

cleaned, the CLEAN MILK SYSTEM prompt is displayed when

the machine is switched off. The maintenance programme can be

started by pressing the maintenance button c.

Precondition: CLEANER FOR CAPPUCCINO / PRESS

BUTTON appears on the screen and the maintenance button c

lights up.

T Continue with the fourth prompt to take action (indicated

by a T), as is described under ‘Start cappuccino cleaning

manually’.

69


7 Maintenance

Dismantling and

rinsing the

cappuccino nozzle

T Carefully pull off the cappuccino nozzle.

T Dismantle the cappuccino nozzle completely.

T Rinse all the nozzle parts thoroughly under running water.

T Reassemble the cappuccino nozzle and attach it once more

to the connector.

Removing foreign

objects

Even the highest-quality coffee beans can contain foreign objects.

These can block the grinder.

Q T Switch your machine off with the On/Off button.

3 T Switch your machine off at the power switch.

T Open the cover of the bean container and remove the aroma

preservation cover.

T Remove the beans with a vacuum cleaner.

T Position the grinder key.

T Turn the key counterclockwise until the jammed foreign

object is released, and remove the object.

T Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

Cleaning the bean

container

Coffee beans may be covered with a slight oil film which remains on

the walls of the bean container. These residues may negatively affect

the coffee results. For this reason clean the bean container from

time to time.

Precondition: COFFEE READY / FILL BEANS is shown on

the display.

Q T Switch your machine off with the On/Off button.

3 T Switch your machine off at the power switch.

T Open the cover of the bean container and remove the aroma

preservation cover.

70


7 Maintenance

T Clean the bean container with a soft, dry cloth.

T Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

The cleaning of the bean container is now complete.

Descaling the

water tank

Limescale deposits may form in the water tank. To ensure correct

function of the machine, descale the water tank from time to time.

T Remove the water tank.

T If you use a CLARIS plus filter cartridge, remove this.

T Descale the tank with a mild, commercially available descaling

agent in accordance with the instructions of the manufacturer.

T Rinse the water tank with clean water afterwards.

T If you use a CLARIS plus filter cartridge, insert this again.

T Fill the water tank with fresh, cold water and reinsert.

71


7 Maintenance

72


8 CLARIS plus filter cartridge – Water for perfect coffee

8 CLARIS plus filter cartridge – Water for perfect coffee

As fresh as from the

spring

Anyone who has ever drunk fresh spring water knows: There is a

world of difference between the elixir of life in its natural form and

the processed fluid that comes out of our taps. Very few of us have

ready access to a spring.

The answer to this is: CLARIS plus filter cartridge from JURA. It transforms

the hardness of the mains water into pH-neutral water. On top

of this, CLARIS plus can protect your fully automated coffee/ Espresso

machine against scale, and used properly, can prolong the service

life of your machine.

Our mains water is of very high quality and is excellent for drinking.

It is subject to ongoing health checks, meets strict, legally binding

quality requirements and contains the most important minerals

and fluorides.

Water – always

pleasant and freshly

filtered

Use of CLARIS plus filter cartridges guarantees you freshly filtered,

delicious-tasting water for your tea and coffee at all times. Designed

specially for JURA coffee machines, it has neutral pH and is placed

directly in the water tank.

This gives you three important benefits:

Z The guarantee that your water is freshly filtered before any

cup of coffee is prepared;

Z Fresh water and unadulterated aromas guarantee your palate

the coffee experience of a lifetime;

Z Lifelong protection for your IMPRESSA (eliminating the need

for descaling).

CLARIS plus from JURA is hard on scale, but soft on your coffee

machine.

73


8 CLARIS plus filter cartridge – Water for perfect coffee

Quality knows no

compromises

Quality from A to Z

No more descaling

Interaction of organic

materials

Water freshly filtered

on the ‘just in time’

principle

You can see it at work on your household appliances every day. Left

to its own devices, scale can cause serious damage. Over time, scale

is deposited on the heating elements, clogging the heating elements

and pipes. Scale is also detrimental to the quality of your

chosen drinks because, with the passage of time, the water will no

longer be properly heated. Consequently: The result is that the

coffee will taste weaker, Espresso will lose its strength and tea will

taste bland. In other words: All enjoyment will be lost.

When you buy coffee, Espresso or tea specialities, aren‘t you careful

to buy top quality? In that case, you should insist on the same for

your water. You will taste and smell the difference the moment you

start using the CLARIS plus filter cartridge. The water will taste purer

and you will be thrilled by the flavour of your coffee specialities.

If you use CLARIS plus filter cartridges regularly, you will be able to

omit the time-consuming business of regular descaling. And your

coffee machine will reward you with a longer service life. We recommend

use of CLARIS plus wherever water is harder than 10° German

hardness (dH). You can determine the water hardness before using

your JURA coffee machine for the first time with the Aquadur® test

strip included in the Welcome Pack.

The CLARIS plus filter cartridge was developed specially for JURA

fully automatic coffee/Espresso machines. It contains a granulate

consisting of ion exchangers and active carbon – in other words,

pure, organic materials with no chemical additives. These agents

work together to reduce the formation of calcium deposits, heavy

metals and other harmful substances contained in mains water.

Other substances detrimental to flavour and aroma, such as chlorine,

are also largely eliminated. Minerals and fluorides contained in the

water are, of course, retained.

Unlike other water filtering systems for domestic use, CLARIS plus

works according to the professional up-flow principle. Practically

speaking: Only the precise amount of water required for a given

beverage is drawn in, and this is filtered directly before use.

74


8 CLARIS plus filter cartridge – Water for perfect coffee

Up-flow principle

Easy to operate

Economical in use

The water flows through the filter at a constant speed, disturbing the

granulate and ensuring that it is used evenly. This system ensures

that the filter is used to optimum effect. The remaining water in the

tank is left untouched until the next cup of coffee is made.

Inserting the CLARIS plus filter cartridge couldn‘t be easier. It is

described in Chapter 2, ‘Preparing and using for the first time –

Using and activating filter’.

After 50 litres of water have been dispensed or after two months at

the latest, the filter will cease to work. After this, the cartridge must

be replaced. Your JURA coffee machine will prompt you to change

the filter.

This process is described in detail in Chapter 7, ‘Maintenance –

changing the filter’.

You can return used filter cartridges to the stockist. They are returned

for recycling to protect the environment.

Maintenance and storage

The CLARIS plus filter cartridge only needs to be removed from the

water tank if you are away for a lengthy period of time or if you wish

to clean or descale the tank using a conventional product.

If you do plan to be away for some time (e.g. for a holiday), we

recommend that you do the following to store the filter cartridge.

Remove the cartridge from the water tank. Place it in a glass with

about two centimetres of water and put it in the fridge.

We recommend that you run about half a litre of water through the

machine before starting to make coffee again. The water could be

discoloured, but this is not harmful to your health.

75


8 CLARIS plus filter cartridge – Water for perfect coffee

Pictures on the next few pages:

1 Water – always pleasant and freshly filtered.

2 CLARIS plus filter cartridges do not require any accessories and do not

take up any extra space. They can be inserted directly into the water tank.

3 4 Water for perfect coffee specialities.

5 The professional up-flow principle: Only the precise amount of water

required for a given beverage is drawn in, and this is filtered directly before

use.

6 Stainless steel pipes in the heater element: With CLARIS plus (left) you

can omit the time-consuming descaling operation (right).

7 The following substances are filtered out through the interaction with

organic materials: calcium (Ca), chlorine (Cl), lead (Pb), copper (Cu),

aluminium (Al).

76


1

2

3


5

6 7


9 ‘The milk makes the difference’

9 ‘The milk makes the difference’

Coffee specialities are taking the entire planet by storm. Up until a

few years ago, classics, such as Espresso and Café Crème were the

most popular choices. Today, Cappuccino, Latte Macchiato & co.

have well surpassed them.

Trendy specialities

with milk

Most modern

technology

More and more often, one finds milk among the ingredients of the

trendy specialities. It doesn‘t matter whether whole milk or skim

milk is used. It isn‘t the fat content which is crucial for the wonderful

foam, but the protein. Heated or frothed, as cream or whipped

cream, no other natural product is combined with coffee as often or

with as much pleasure as milk. There is a wide variety of alternatives

available to allergy sufferers as well: goat/sheep milk, rice milk or soy

milk.

The most modern technology and ingenious Cappuccino nozzles

allow you to delve into the multi-faceted world of coffee speci alities

with every IMPRESSA. Here, the milk is not heated to above 75 °C.

This is namely the only way that the inimitable fine foam can be

fully developed.

Thanks to the variable brewing unit, which can prepare between

5 and 16 grams of coffee powder under ideal conditions, you can

make sure that the tastes of the coffee and milk are harmoniously

balanced. Simply allow your imagination to run free in creating new

recipes and add flavour and fineness to your personal favourite

coffee specialities according to your mood.

Frothing as done

by a professional

Make sure you try out the secret Barista tip: Because milk can form

a vortex on the rough surface of a stainless steel pot especially well,

perfect foam can be formed in these receptacles. And the professional

also knows what must also be given special attention: Regularly

and thoroughly clean the Cappuccino nozzle, rinse out the milk

container well every evening and store the milk in the refrigerator

overnight.

81


10 Accessories and Service

10 Accessories and Service

Extend your coffee

horizon

Care products

CLARIS plus filter

cartridge

1 Coffee specialities made with milk are very fashionable these

days. The One Touch cappuccino nozzle: The quickest, most direct

and simple way to delve into the world of coffee and to revel in all

its variety.

2 Original JURA care products are optimally tailored to the maintenance

programmes. You should therefore use only original JURA

care products. Your IMPRESSA will thank you for it.

3 The CLARIS plus filter cartridge was developed specially for JURA

coffee machines. It is placed directly into the water tank. CLARIS plus

works according to the professional up-flow principle.

Further information on this subject can be found in Chapter 8,

‘CLARIS plus filter cartridge – Water for perfect coffee’.

Cleaning tablets

Descaling tablets

Auto-Cappuccino Cleaner

Service

4 Your IMPRESSA machine comes with an integrated cleaning

programme. The original JURA cleaning tablets are specifically

tailored for the machine and optimally dissolve accumulated coffee

oils.

5 Scale is the biggest enemy of all household appliances that

involve the use of mains water. JURA has developed a descaling

tablet for the IMPRESSA which removes scale and at the same time

is easy on your machine.

6 Clean your Professional Cappuccino Frother and Easy-Cappuccino

Frother with the original Auto-Cappuccino Cleaner from

JURA. This will ensure that it is 100% clean.

7 Competent, high-quality service is a top priority as far as JURA

is concerned, irrespective of whether it is provided by the glassy

service factory of the Swiss parent company or in the authorised

JURA service centres all around the world.

8 Every IMPRESSA service is preceded by an electronically controlled

diagnostic run.

9 Service work is performed competently and professionally by

JURA‘s trained technicians.

82


1

83


2

84


2

85


3

86


4

5 6

87


7

88


8

9

90


11 Messages on plain text display

11 Display messages

Message Cause/Result Action

TRAY EMPTY

WATER TANK FILL

GROUNDS EMPTY

TRAY MISSING

COFFEE TRAY

MISSING

PRESS RINSE

The drip tray is full. You cannot

prepare any coffee products,

hot water or milk products.

The water tank is empty.

You cannot prepare any coffee

products, hot water or milk

products.

The coffee grounds container

is full. You cannot prepare any

coffee products, but you can

prepare hot water or milk.

The drip tray is not inserted

correctly or is not inserted at

all. You cannot prepare any

coffee products, hot water or

milk products.

The coffee grounds container

is not inserted correctly or is

not inserted at all. You cannot

prepare any coffee products,

hot water or milk products.

The IMPRESSA is prompting

you to rinse it.

T Empty the drip tray.

T Fill the water tank

(See Chapter 2, ‘Preparing and

using for the first time – Filling

the water tank’).

T Empty the coffee grounds

container and the drip tray.

T Insert the drip tray.

T Clean the metal contacts on

the back of the drip tray.

T Insert the coffee grounds

container.

T Press the maintenance

button to start rinsing.

COFFEE READY /

FILL BEANS

COFFEE READY /

CAPPU. RINSE

The bean container is empty.

You cannot prepare any coffee

products, but you can prepare

hot water or milk.

The IMPRESSA is prompting

you to run cappuccino rinsing.

T Fill the bean container

(See Chapter 2, ‘Preparing and

using for the first time – Filling

the bean container’).

T Press the maintenance

button to start cappuccino

rinsing.

91


11 Messages on plain text display

Message Cause/Result Action

COFFEE READY /

CLEAN

COFFEE READY /

CLEAN (flashes)

CLEAN NOW / CLEAN

(flashes)

COFFEE READY /

DESCALE

COFFEE READY /

DESCALE (flashes)

DECALCIFY NOW /

DESCALE (flashes)

COFFEE READY /

FILTER CHANGE

COFFEE READY /

FILTER CHANGE

(flashes)

CHANGE NOW / FILTER

CHANGE (flashes)

After 220 preparations or

80 switch-on rinses, the

IMPRESSA will prompt you to

clean it.

After 250 preparations the

IMPRESSA will prompt you to

clean it.

After 260 preparations the

IMPRESSA will prompt you to

clean it.

The IMPRESSA is prompting

you to descale it.

The IMPRESSA is prompting

you to descale it.

The IMPRESSA is prompting

you to descale it.

After 2 months or when

50 litres of water have flowed

through the filter, its capacity

is reached.

After 2 months or when

55 litres of water have flowed

through the filter, its capacity

is reached.

After 2 months or when

60 litres of water have flowed

through the filter, its capacity

is reached.

T Clean the machine

(See Chapter 7, ‘Maintenance –

Cleaning the machine’).

T Clean the machine

(See Chapter 7, ‘Maintenance –

Cleaning the machine’).

T Clean the machine

(See Chapter 7, ‘Maintenance –

Cleaning the machine’).

T Descale the machine

(See Chapter 7, ‘Maintenance –

Descaling the machine’).

T Descale the machine

(See Chapter 7, ‘Maintenance –

Descaling the machine’).

T Descale the machine

(See Chapter 7, ‘Maintenance –

Descaling the machine’).

T Replace the CLARIS plus filter

cartridge (refer to Chapter 7

‘Maintenance – Changing the

filter’).

T Replace the CLARIS plus filter

cartridge (refer to Chapter 7

‘Maintenance – Changing the

filter’).

T Replace the CLARIS plus filter

cartridge (See Chapter 7

‘Maintenance – Changing the

filter’).

92


11 Messages on plain text display

Message Cause/Result Action

CLEANER FOR

CAPPUCCINO /

PRESS BUTTON

BEANCOVER MISSING

The IMPRESSA prompts you to

clean the cappuccino nozzle.

The beancover is not inserted

correctly or is not inserted at

all. You cannot prepare any

coffee products, but you can

prepare hot water or milk.

T Perform cappuccino

cleaning (refer to Chapter 7

‘Maintenance – Cleaning the

cappuccino nozzle’).

T Insert the beancover.

PRE-GROUND /

NOT ENOUGH

P0WDERFUNNEL

TOO HOT

There is too little pre-ground

coffee in the filler funnel. The

IMPRESSA stops the operation.

The powder funnel for preground

coffee is not fitted.

System is too hot to begin a

maintenance programme.

T The next time you make

coffee use more pre-ground

coffee (refer to Chapter 5,

‘Preparation – Pre-ground

coffee’).

T Insert the powder funnel.

T Prepare a coffee speciality or

hot water.

93


12 Troubleshooting

12 Troubleshooting

Problem Cause/Result Action

Grinder is making a very

loud noise.

The frother does not

produce enough milk

foamor milk sprays from

the cappuccino nozzle.

Coffee only comes out

in drips when it is being

prepared.

Water hardness cannot be

adjusted.

COFFEE READY /

FILL BEANS

is displayed, although the

bean container has been

filled.

COFFEE READY /

FILL BEANS

is not displayed although

the bean container is

empty.

TRAY EMPTY

stays on constantly.

WATER TANK FILL

is displayed although the

water tank is full.

There are foreign objects

in the grinder.

The cappuccino nozzle is

dirty.

Coffee or pre-ground

coffee has been ground

too finely and is blocking

the system.

The CLARIS plus filtercartridge

is activated.

The grinder is not yet

completely filled with

beans.

The bean monitor is

dirty.

The metal contacts of the

drip tray are dirty or wet.

The water tank float is

trapped.

T Remove the foreign objects (see

Chapter 7, ‘Maintenance – Removing

foreign objects’).

T Rinse and clean the cappuccino

nozzle (see Chapter 7, ‘Maintenance –

Cappuccino nozzle’).

T Put the grinder on a coarser setting

or use coarser pre-ground coffee (refer

to Chapter 2, ‘Preparing and using for

the first time – Adjusting grinder’).

T Deactivate the CLARIS plus filter

cartridge.

T Prepare a coffee speciality.

T Clean the bean container

(see Chapter 7, ‘Maintenance –

Cleaning the bean container’).

T Clean the metal contacts on the back

of the drip tray.

T Descale the water tank

(see Chapter 7, ‘Maintenance –

Descaling the water tank’).

94


12 Troubleshooting

Problem Cause/Result Action

ERROR 2 is displayed.

Other ERROR messages

are displayed.

If the device was exposed

to the cold for a long

period of time, it is

disabled from heating up

due to safety reasons.

T Warm up the device at room

temperature.

– T Turn the IMPRESSA off at the power

switch. Contact Customer Support

in your country (see Chapter 16 ‘JURA

contact details’).

E

If you have not been able to solve the problem, contact

Customer Support in your country. You will find the phone

number in Chapter 16, ‘JURA contact details’.

95


13 Transport and environmentally neutral disposal

13 Transport and environmentally neutral disposal

Transport / Empty

system

Keep the packaging of your IMPRESSA. It should be used to protect

the machine during transportation.

In order to protect the IMPRESSA from frost during transportation,

the system must be emptied.

Precondition: The IMPRESSA must be switched off (standby).

T Remove the water tank.

T Place a receptacle under the hot water spout and below the

cappuccino nozzle.

c T Press the maintenance button until SYS. EMPTY. is

displayed.

A small amount of water flows from the cappuccino nozzle

and the hot water spout. The operation stops automatically.

The IMPRESSA will switch itself off.

3 T Turn your IMPRESSA off at the power switch.

E

The next time you use the machine the system must be

refilled (see Chapter 2, ’Preparing and using your the machine

or the first time –First-time use’).

Disposal

H

Please dispose of old machines in an environmentally neutral way.

Old machines contain valuable materials which should be salvaged

for recycling. Please therefore dispose of old machines via your

regional collection system.

96


14 Technical data

14 Technical data

Rating plate

E

The voltage and current vary according to the safety test.

Please refer to the rating plate before connecting the device.

The rating plate is located on the bottom of your IMPRESSA. The

information shown on the rating plate has the following meaning:

Z

Z

V AC = alternating current in volts

W = power output in watts

A

This product complies with all applicable EU directives.

S

This product meets the requirements of the Decree concerning

Low Voltage Electrical Products and the Decree concerning

Electromagnetic Compatibility (VEMV). This is issued by

the ESTI (Swiss Federal Inspectorate for Heavy Current Installations).

F

This product complies with all applicable UL directives

(Underwriters Laboratories Inc. ® ).

D

This product complies with all applicable SAA directives

(Standards Association of Australia).

G

This product complies with all applicable CCC directives

(China Compulsory Certification).

97


14 Technical data

Technical data

Voltage

Power

Safety test

Energy Save No

Energy Save Level 1

Energy Save Level 2

Pump pressure

Holding capacity of water tank

Holding capacity of bean

container

Holding capacity of coffee

grounds container

Cable length

Weight

Dimensions (W x H x D)

A S 230 V AC, 50 Hz

F 120 V AC, 60 Hz

D 220 –240 V AC, 50 Hz

G 220 V AC, 50 Hz

1350 W

S D F G

23 Wh

16 Wh

14 Wh

Static max. 15 bar

2.8 l

280 g

Approx. 20 servings

Approx. 1.1 m

13.3 kg

31 x 37 x 43.5 cm

98


14 Technical data

99


15 Key technologies

15 Key technologies and products

1 Intelligent Pre Brew Aroma System (I.P.B.A.S. © ).

Perfect coffee is no accident. The Intelligent Pre Brew Aroma System ©

produces the very best in flavour from every coffee blend and

roast.

1a The freshly ground coffee beans are delivered to the infusing

cylinder as a powder from the grinder.

1b There it is optimally compressed.

1c Prior to brewing, the powder is moistened. The pores swell and

the flavours are released.

1d During brewing, perfect coffee is delivered to the cup, crowned

by a velvety, soft crema for perfect enjoyment.

2 The IMPRESSA range of products includes the following series:

Z IMPRESSA Z series, Cappuccino at the touch of a button, premium

professional technology for domestic use.

Z IMPRESSA S series for demanding households

Z IMPRESSA J series, Perfect Enjoyment, Perfect Aesthetics

Z IMPRESSA F series, simple operation, multi-winner

Z IMPRESSA C series, Click & Drink

Z IMPRESSA X series for catering and office applications

Obtain the advice of the JURA experts.

@

You will find the purchase advisor at www.jura.com.

3 For perfect coffee quality it is important to get the grinding

right. To this end, a powerful 6-level powerful conical burr grinder

with grinding cones constructed out of hardened steel is provided.

4 The variable brewing unit holds between 5 and 16 g of coffee.

This means that two cups can be prepared at once in a single brewing

operation.

5 Durable pipes constructed from a high-quality steel alloy conduct

the water through the thermoblocks where it is heated to the

correct temperature.

100


1

1a

1b

1c

1d


2

IMPRESSA Z

IMPRESSA S

IMPRESSA J

IMPRESSA F


IMPRESSA C

IMPRESSA X

IMPRESSA XF


3

4 5


16 JURA contact details

16 JURA contact details

A

Australia

Global Coffee Solutions Pty Ltd.

Customer Service Phone +61 1300 552 883

Fax +61 0242 846 099

E-mail info@globalcoffee.com.au

Opening Hours

Distributor Address/

Service Address

B

Monday to Friday

8:00 am – 5:00 pm

Global Coffee Solutions Pty Ltd

5/77 Jardine Street

Fairy Meadow NSW 2519

Bangladesh

Please contact the Singapore office for details.

Brunei

Please contact the East Malaysian office for details.

Burma

Please contact the Singapore office for details.

C

Cambodia

Please contact the Singapore office for details.

Canada

Faema Canada

Customer Service Phone (416) 535-1555

Toll free (877) 323-6226

Fax (416) 535-3843

E-mail espresso@faema.net

China

Shanghai HJ Coffee Co., Ltd.

Customer Service

Phone +86 21 62940690 ext.31

E-mail service@hjcoffee.com

Opening Hours Monday to Friday 09:00 – 17:30

Distributor Address/

Service Address

Czech Republic

Petraco, Spol. S R.O.

Shanghai HJ Coffee Co., Ltd.

Room D 3F, building one

Xinhua Road No. 543

Shanghai 200052

Customer Service Phone +420 775 997 557

E-mail dokladal@juraswiss.cz

Opening Hours Monday to Thursday 9:00 – 17:00

Friday 9:00 – 15:00

Distributor Address/

Service Address

D

Denmark

Scandinavian CoffeeSystem Aps

Petraco, Spol. S R.O.

Udolni 5

602 00 Brno

Customer Service Phone +45 7020 7333

Fax +45 7020 7343

E-mail service@coffeesystem.com

Opening Hours Monday to Thursday 09:00 – 16:30

Friday 09:00 – 16:00

Distributor Address/

Service Address

Scandinavian CoffeeSystem Aps

Tordenskjoldsgade 19

1055 Kobenhavn K

Opening Hours

Distributor Address/

Service Address

Monday to Friday

9:00 am – 6:00 pm

Saturday 10:00 am – 5:00 pm

Faema Canada

672 Dupont Street, Suite 201

Toronto, Ontario M6G 1Z6

105


16 JURA contact details

E

Estonia

Infomelton OÜ

Customer Service Phone +372 651 88 55

+372 651 88 50

E-mail lavazza@lavazza.ee

Opening Hours Monday to Friday 09:00 – 17:00

Distributor Address/

Service Address

F

Infomelton OÜ

Weizenbergi 27

Tallinn 10150

Finland

Home Appliance Brokers HAB Oy

Customer Service Phone +358 207 300 090

E-mail info@haboy.fi

Opening Hours Monday to Friday 08:00 – 16:00

Distributor Address

Service Address

G

Greece

COFFEE CONNECTION S.A.

Home Appliance Brokers HAB Oy

Elimäenkatu 29, 00510 Helsinki

Monilaite-Thomeko Oy

Salpakuja 6, 01200 Vantaa

Customer Service Phone +30 210 66 40 640

E-mail coffeeway@coffeeway.com

Opening Hours Monday to Friday 09:00 – 17:00

Distributor Address/

Service Address

H

Hong Kong PRC

Pacific Coffee Company Ltd

COFFEE CONNECTION S.A.

Agiou Louka str. Peania

Attica 190 02

Customer Service Phone +852 2805 1627

E-mail sales@pacificcoffee.com

Opening Hours

Distributor Address/

Service Address

I

Iceland

Karl K. Karlsson

Monday to Friday

9:00 am – 6:00 pm

Saturday 9:00 am – 1:00 pm

Pacific Coffee Company Ltd

701–704 Hollywood Center

233 Hollywood Road, Sheung Wan

Customer Service Phone +354 540 9003

E-mail karlk@karlsson.is

Opening Hours Monday to Friday 09:00 – 18:00

Distributor Address/

Service Address

Indonesia Bali

BHINEKA JAYA

Karl K. Karlsson

Pacific Coffee Company Ltd

Skútuvogur 5, 104 Reykjavík

Customer Service Phone +62 361 724746

Mobile Nr. +62 81 23817951 or

+62 361 7460521

E-mail vivi@kopibali.com

Opening Hours Monday to Saturday 08:30 – 16:30

Distributor Address/

Service Address

Indonesia Jakarta

SUKSES PRATAMA JAYA P.T.

BHINEKA JAYA

Jl. Pulau Moyo 9A, Denpasar, Bali

Customer Service Phone +62 21 6331177

Fax +62 21 63857008

E-mail cs@suprajaya.com

Opening Hours Monday to Saturday 09:00 – 17:00

Service Number during off hours: +62

21 6331177

Distributor Address/

Service Address

SUKSES PRATAMA JAYA P.T.

Jalan: K.H. Hasyim Ashari 125

Pusat Niaga Roxy Mas

Blok C.4 No.14–15, Jakarta 10150

106


16 JURA contact details

Israel

J.Feffer l.t.d.

Customer Service Phone +972 353 350 38

Fax +972 353 305 54

E-mail feffer-j@barak-online.net

Opening Hours Sunday–Thursday 08:00 – 18:00

Friday 09:00 – 13:00

Distributor Address/

Service Address

K

Korea

HLI Company Limited

J.Feffer l.t.d.

9,Simtat Ma‘ale Hachoma

Ind. Zone

Or-Yehuda 60370, Israel

Customer Service Phone +82 234 522 127

Fax Phone +82 345 229 50

E-mail wj_lee@hlikorea.com

Opening Hours Monday to Friday 09:00 – 18:00

Distributor Address/

Service Address

L

HLI Company Limited

7floor, Sungwon Bldg

Yeoksam-Dong, Kangnam-Ku

Seoul

Labuan

Please contact the East Malaysian office for details.

Lativa

CREMA SIA

Customer Service Phone +371 7244082

+371 26622888

E-mail crema@crema.lv

Opening Hours Monday to Friday 10:00 – 17:00

Distributor Address/

Service Address

CREMA SIA

Gertrudes 86, Riga, LV-1009

Lithuania

JSC Pretendentas

Customer Service Phone + 370 315 73442

Mobile +370 650 84779

E-mail alma@pretendentas.lt

Opening Hours Monday to Friday 09:00 – 18:00

Distributor Address/

Service Address

M

Malaysia, East

RICMAS Borneo Sdn. Bhd.

JSC Pretendentas

62161 Alytus, str. Ulonu 33

Customer Service Phone +60 88 456 100, –200

Fax +60 88 241 600

E-mail jura@ricmas-malaysia.com

Opening Hours Monday to Friday 09:00 – 17:30

Service Number during off hours: +60

16 830 60 83

Distributor Address/

Service Address

Malaysia, West

RICMAS Peninsular Sdn. Bhd.

RICMAS Borneo Sdn. Bhd.

Unit # E3–8, 3rd Floor

Block E, Plaza Tanjung Aru

Jalan Mat Salleh, Tanjung Aru

88150 Kota Kinabalu, Sabah

Customer Service Phone +6 03 4296 5989

Fax +6 03 4297 5636

E-mail jura@ricmas-malaysia.com

Opening Hours Monday to Friday 09:00 – 17:30

Service Number during off hours:

016 201 5789

Office Address/ Service

Address

RICMAS Peninsular Sdn. Bhd.

3A-1 Jalan Perubatan 3

Pandan Indah

55100 Kuala Lumpur

107


16 JURA contact details

N

New Zealand

Euro Espresso Ltd.

Customer Service Phone +64 9 277 1334

Fax +64 9 277 9375

E-mail info@euroespresso.co.nz

Opening Hours

Distributor Address/

Service Address

Norway

Black Cat Kaffe og Tehus AS

Monday to Friday

8.30 am – 5:00 pm

6 Mepal Place, Manukau City,

Auckland

PO Box 76–342, Manukau City,

Auckland 1730

Customer Service Phone +47 22 06 29 90

Fax +47 22 06 29 99

E-mail

info@blackcatkaffeogtehus.no

Opening Hours Monday to Friday 08:30 – 16:30

Distributor Address/

Service Address

P

Philippines

Pacific Continental Company Inc.

Black Cat Kaffe og Tehus AS

Aslakveien 20h, 0753 Oslo

Customer Service Phone +63 2 551 3216

Fax +63 2 831 8314

E-mail jura@conlinscoffee.com

Opening Hours Monday to Friday 09:00 – 18:00

Service Number during off hours: +63

916 5294052

Distributor Address/

Service Address

Pacific Continental Company Inc.

2753 Park Avenue, Pasay City

Metro Manila 1300

Puerto Rico

ProExpo CA Consultores S.A.

Customer Service Phone +506 234 7404

Fax +506 253 5296

E-mail info@grupocapresso.com

Distributor Address/

Service Address

S

Saudi Arabia

Saudi Marketing Solutions

ProExpo CA Consultores S.A.

P.O. Box 75-2120

Calle Blancos, San Jose

Customer Service Phone +9661 201 2053

Fax +9661 201 2056

E-mail info@sms-arabia.com

Opening Hours

Saturday to Wednesday

09:00 – 13:00 and 17:00 – 21:00

Distributor Address P.O.Box 12679 Jeddah 21483

Service Address

Singapore

RICMAS INTERNATIONAL Pte. Ltd.

Aruba & Muhandis Musad

Al-Anqari Street Intersection, Riyadh

Customer Service Phone +65 6562 8853

Fax +65 6562 8854

E-mail jura@ricmas.com

Opening Hours Monday to Friday 09:00 – 17:30

Service Number during off hours: +65

90210314

Office Address/ Service

Address

RICMAS INTERNATIONAL Pte. Ltd.

25 International Business Park

German Center #01–57/58

Singapore 609916

108


16 JURA contact details

South Africa

International Coffee Equipment CC

Customer Service Phone +27 11 708 2481

E-mail info@icesa.za.net

Opening Hours Monday to Friday 08.00 – 17.00

Saturday 08.00 – 13.00

Office Address

Service Address

T

Taiwan

Eurocafé Corporation

International Coffee Equipment CC

JURA Corner Building, Showroom

475/3 Hans Strydom Drive

KYA Sand

International Coffee Equipment CC

JURA Corner Building, 1st Floor

475/3 Hans Strydom Drive

KYA Sand

Customer Service Phone +886 2 28272683

Fax +886 2 28225797

E-mail service@eurocafe.com.tw

Opening Hours

Office Address/ Service

Address

Thailand

RICMAS (Thailand) Co., Ltd.

Monday to Friday

9:00 am – 6.00 pm

Eurocafé Corporation

2F, No. 251 Sec. 2 Hsi An Street

Pei-Tou District

Taipei

Customer Service Phone +66 2262 0543

Fax +66 2262 0542

E-mail jura@ricmas-thailand.com

Opening Hours Monday to Friday 09.00 – 17.00

Service Number during off hours:

+66 1828 6996

Office Address/ Service

Address

55 Biohouse Building Sukhumvit

39 Rd.

Klongtan-nue, Wattana,

Bangkok 10110

Turkey

John’s Coffee

Customer Service Phone +90 216 420 2400

Fax +90 216 313 56 32

E-mail info@johnscoffee.com.tr

Opening Hours Monday to Friday 08:30 – 18:00

Office Address/ Service

Address

U

United Arab Emirates

Boncafé Middle East LLC.

John’s Coffee

Imes Sanayi Sitesi C blok 308 Sok.

Yukari Dudullu-Istanbul, 34776

Customer Service Phone +97 14 28 28 742

Fax +44 20 77 222 333

E-mail info@boncafeme.com

Opening Hours Saturday to Thursday 8.30 – 17.30

Service Number during off hours:

+44 870 165 0429

Distributor Address/

Service Address

United Kingdom

Fairfax Coffee Ltd

Boncafé Middle East LLC.

P.O. Box 74044, DUBAI

Customer Service Phone +44 20 7722 7646

Fax +44 20 77 222 333

E-mail info@fairfaxcookshop.com

Opening Hours Monday to Friday 09.00 – 17.30

Distributor Address/

Service Address

V

Fairfax Coffee Ltd

1 Regency Parade, Finchley Road,

London NW3 5EQ

Vietnam

Please contact the Singapore office for details.

109


Index

Index

A

Accessories 82

Adjusting grinder 23

Assessing and setting water hardness 22

Automatic switch-off 54

B

Bean container 8

Cleaning 70

Filling 19

C

Cappuccino 42

Cappuccino nozzle

Cleaning 68

Dismantling and rinsing 70

One Touch Cappuccino nozzle 8

One Touch cappuccino nozzle 16

Rinsing 68

Care products 82

CLARIS plus 73, 81

CLARIS plus filter cartridge

Using and activating 21

Clean

Machine 63

Cleaning

Bean container 70

Cappuccino nozzle 68

Coffee 42

Coffee grounds container 8

Coffee spout, height adjustable 8

Cover

Bean container 8

Water tank 8

D

Descale

Machine 65

Descaling

Water tank 71

Display messages 91

Drip tray 8

E

Energy-save mode 51

Espresso 42

F

Filter

Change 61

Using and activating 21

Fineness of grind

Adjusting grinder 23

First-time use 19

First-time use 19

G

Grinding wheel 8

Ground coffee 45

H

Hot milk 46

Hot water 46

Hot water spout 8

I

Internet 17

K

Knowledge Builder 17

L

Language 58

Latte macchiato 43

Logo 57

M

Machine

Clean 63

Descale 65

Rinse 60

Machine accessories 82

Maintenance 60

Maintenance button 9

Maintenance tips 60

Viewing maintenance status 32

Messages on display 91

Milk 81

Hot 46

Milk container

Vacuum milk container 16

110


Index

O

One Touch Cappuccino nozzle 8, 16

P

Pre-ground coffee 45

Preparation

At the touch of a button 40

Cappuccino 42

Coffee 42

Espresso 42

Hot milk 46

Hot water 46

Latte macchiato 43

Pre-ground coffee 45

Ristretto 41

Special coffee 42

Problems

Troubleshooting 94

Programmable switch-on time 53

Programming mode 48

Automatic switch-off 54

Energy-save mode 51

Programmable switch-on mode 53

Rename 58

Rinses 55

Switch-on time 53

Time and weekday 52

R

Rating plate 97

Recipes 34

Removing foreign objects 70

Removing stones 70

Rename product name 58

Rinse

Cappuccino nozzle 68

Machine 60

Rinses 55

Ristretto 41

Rotary Switch 9, 16

S

Safety 10

Service 82

Settings

Default settings in programming mode 48

Entering a default setting for the amount

of water for a cup size 28

One-off settings before and during

preparation 27

Water hardness 22

Setting up 18

Special coffee 42

Specialities 34

Trendy specialities with milk 81

Standby

Switching off 25

Supplied as standard 18

Switch-off

Automatic 54

Switch-on

Switch-on time 53

Switch-on time, programmable 53

Switching off 25

Standby 25

Switching on

Machine 24

T

Technical data 97

Time and weekday 52

Troubleshooting 94

U

Unit amount of water/Time format 56

Use

Proper 10

V

Viewing information 32

W

Water tank 8

Descaling 71

Filling 18

111


Art. 67228/Z5/en/0708

Directives

The machine complies with the following EU directives:

Z 73/23/EEC of 19 February 1973, Low Voltage Directive including

Amending Directive 93/68/EEC.

Z 89/336/EEC of 3 May 1989, Electromagnetic Compatibility, including

Amending Directive 92/31/EEC.

Technical changes

We reserve the right to make technical changes.

The illustrations used in the IMPRESSA Z5 – Generation II Manual

show the IMPRESSA Z5 – Generation II Alu model. Your IMPRESSA

could incorporate minor changes.

Feedback

Your opinion is important to us!

Use the contact link at www.jura.com.

The Instructions for Use contain information which is protected by

copyright. It is not permitted to photocopy or translate these

Instructions for Use into another language without the express

written consent of JURA Elektroapparate AG.

JURA Elektroapparate AG

Kaffeeweltstrasse 10

CH-4626 Niederbuchsiten

www.jura.com

112

More magazines by this user
Similar magazines