Project Manual/Specifications - Pavilion Construction

MARQUIS Newberg
06 40 23 - INTERIOR ARCHITECTURAL WOODWORK
October 5, 2012
5. Hardwood Plywood and Face Veneers: HPVA HP-1.
C. Window Sills:
1. Dimensions: 5/4 with "F" reveal as detailed in Drawings..
2. Species and Grade: Medium-density fiberboard (MDF).
3. Finish: Shop-primed and field-painted.
D. Thermoset Decorative Panels:
1. Particleboard or medium-density fiberboard finished with thermally fused, melamine-impregnated
decorative paper complying with LMA SAT-1.
E. High-Pressure Decorative Laminate:
1. NEMA LD 3, grades as indicated or, if not indicated, as required by woodwork quality standard.
2.2 MISCELLANEOUS WOOD TRIM
A. Sheet Cork:
1. Thickness: 1/2-inch thickness.
2. Fortified for use as a tack surface.
3. Install without seams, and with adhesive recommended by cork sheet manufacturer for substrate
indicated.
2.3 CABINET HARDWARE
A. Frameless Concealed Hinges (European Type):
1. BHMA A156.9, B01602, self-closing.
2. 170 degrees of opening.
3. Nickel-plate finish.
4. Basis-of-Design: 3000 series by Grass.
Salice by Rockford Process Control.
5. Use at least 3 hinges at doors over 48-inches high.
B. Door Pulls:
1. As indicated or, if not indicated, as directed by Interior Design Consultant.
C. Catches:
1. Magnetic touch latch, heavy-duty.
2. Basis-of-Design: 1000LS by EPCO.
D. Adjustable Shelf Standards and Supports:
1. Basis-of-Design: Series 255 and 256 by Knape & Vogt.
2. Finish: As selected by Architect from manufacturer's standard finishes.
E. Shelf Rests:
1. No. 346 for drilled holes by Knape & Vogt.
2. Nickel finish.
F. Drawer Slides:
1. Side-mounted, full-extension, zinc-plated steel drawer slides with steel ball bearings,
BHMA A156.9, B05091s:
a. Box Drawer Slides:
1) 100 lbf.
2) For Drawers Deeper than they are Wide: No. 3832A by Accuride.
3) For Drawers 24-inches Wide or Less: No. 7432 by Accuride.
06 40 23 - INTERIOR ARCHITECTURAL WOODWORK
page 4