Merc manual v5 - Pirate4x4.Com
Merc manual v5 - Pirate4x4.Com
Merc manual v5 - Pirate4x4.Com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Volvo Penta EGC<br />
Volvo Penta EGC Control Module<br />
This section describes scan tool functions related to marine engines equipped with<br />
Volvo Penta EGC (Electronic Gas Control) fuel injection systems. This system was<br />
introduced on Volvo Penta gasoline marine engines for the 2006 model year.<br />
Connecting to the Volvo Penta EGC System<br />
The MerCruiser scan tool provides a comprehensive set of diagnostic and support<br />
functions for troubleshooting EGC equipped engines. Connection and operation of<br />
the tool is simple and straight forward.<br />
1) Locate the engine’s diagnostic connector (DLC). The exact location of this<br />
connector is specified in the engine manufacturer’s service <strong>manual</strong> and may vary<br />
depending upon the engine type. Please be aware that the connector may have a<br />
protective cap attached to it.<br />
Volvo Penta EGC Adapter<br />
for 2006 & 2007 EGC systems<br />
Rinda Tech P/N 94024<br />
Scan Tool CAN Network Adapter<br />
for 2008-Up EGC systems<br />
Rinda Tech P/N 94027<br />
2) With the engine’s ignition switch in the OFF position, plug the scan tool’s<br />
communication cable into the diagnostic connector. For 2006 & 2007 EGC<br />
systems use adapter #94024, for 2008 and newer systems use adapter #94027.<br />
Page 25