Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

More documents

Recommendations

Info

SITOP power · Standard 24 V Single-phase Output currents 2.5 to 4 A ■ Overview The universal types The S7-200 type 3 ■ Application The universal power supply units for all supply networks, with a wide-range input from 93 V to 264 V AC and 110 V to 350 V DC for supply from all typical networks. Power supply unit whose design and functionality are optimally matched to the SIMATIC S7-200 micro PLC; flat design, particularly suitable for low control cabinet depths. ■ Technical specifications Power supply, type 2.5 A 4 A 3.5 A Order No. 6EP1 332-1SH12 6EP1 332-1SH22 6EP1 332-1SH31 Input Single-phase AC or DC Single-phase AC or DC Single-phase AC Rated voltage V in rated 120 to 230 V AC 120 to 230 V AC 120/230 V AC wide-range input wide-range input Settable using wire jumper Voltage range 93 to 264 V AC or 110 to 93 to 264 V AC or 110 to 93 to 132 V/187 to 264 V AC 350 V DC 350 V DC Overvoltage strength 2.3 x V in rated , 1.3 ms 2.3 x V in rated , 1.3 ms 2.3 x V in rated , 1.3 ms Mains buffering at I out rated > 20 ms at V in = 120 V, > 80 ms > 20 ms at V in = 120 V, > 80 ms > 20 ms at V in = 187 V (typ. 100 ms) at V in = 187 V (typ. 100 ms) at V in = 187 V Rated line frequency; range 0/50/60 Hz, 47 to 63 Hz 0/50/60 Hz, 47 to 63 Hz 50/60 Hz, 47 to 63 Hz Rated current I in rated 1.3 to 0.7 A 1.8 to 1.1 A 1.65/0.95 A Inrush current limitation (+25 °C) < 33 A, < 3 ms (V in = 230 V) < 33 A, < 3 ms (V in = 230 V) < 33 A, < 3 ms (V in = 230 V) I 2 t < 3.5 A 2 s < 3.5 A 2 s < 1.0 A 2 s Integrated line-side fuse T 3.15 A (not accessible) T 3.15 A (not accessible) T 2.5 A/250 V (not accessible) Recommended circuit-breaker (IEC 898) in mains supply line Continued on page 3/3. Two-pole circuit-breaker from 10 A, Characteristic C or from 6 A, Characteristic D Two-pole circuit-breaker from 10 A, Characteristic C or from 6 A, Characteristic D Two-pole circuit-breaker from 10 A, Characteristic C or from 6 A, Characteristic D Output Stabilized, floating direct voltage Stabilized, floating direct voltage Stabilized, floating direct voltage Rated voltage V out rated 24 V DC 24 V DC 24 V DC Total tolerance ± 1 % ± 1 % ± 5 % (typ. ± 2 %) • Stat. mains compensation Approx. ± 0.1 % Approx. ± 0.1 % Approx. ± 0.1 % • Stat. load compensation Approx. ± 0.2 % Approx. ± 0.2 % Approx. ± 0.2 % Residual ripple (clock frequency: < 50 mV pp (typ. 40 mV pp ) < 50 mV pp (typ. 40 mV pp ) < 150 mV pp (typ. 30 mV pp ) approx. 50 kHz) Spikes (bandwidth: 20 MHz) < 100 mV pp (typ. 40 mV pp ) < 100 mV pp (typ. 40 mV pp ) < 240 mV pp (typ. 110 mV pp ) Setting range - - - Status display Green LED for 24 V O.K. Green LED for 24 V O.K. - Power ON/OFF behavior No overshoot of V out (soft start) No overshoot of V out (soft start) No overshoot of V out (soft start) Starting delay/voltage rise < 0.6 s/typ. 20 ms < 0.6 s/typ. 20 ms < 1 s/typ. 80 ms Rated current I out rated 2.5 A 4 A 3.5 A Current range • Up to +45 °C 0 to 2.5 A 0 to 4 A 0 to 3.5 A • Up to +60 °C 0 to 2.5 A 0 to 2.5 A 0 to 3.5 A Dyn. V/I with • Starting on short circuit Approx. 2.8 A constant current Approx. 4.4 A constant current typ. 5 A for 100 ms • Short-circuit in operation Approx. 2.8 A constant current Approx. 4.4 A constant current typ. 5 A for 100 ms Parallel connection for increased output Yes, up to 10 Yes, up to 10 Yes, up to 5 3/2 Siemens KT10.1 · 2004
SITOP power · Standard 24 V Single-phase Output currents 2.5 to 4 A Power supply, type 2.5 A 4 A 3.5 A Order No. 6EP1 332-1SH12 6EP1 332-1SH22 6EP1 332-1SH31 Efficiency Efficiency at V out rated , I out rated Approx. 85 % Approx. 85 % Approx. 84 % Power loss at V out rated , I out rated Approx. 11 W Approx. 17 W Approx. 16 W Control Dyn. mains compensation, typ. ±0.3% V out ±0.3% V out ±0.3% V out (V in rated ±15 %) Dyn. load compensation (I out : 50/100/50 %) typ. ± 0.5 % V out typ. ± 0.5 % V out < ± 10 % V out (typ. ± 3 % V out ) Settling time • Load step from 50 to 100 % < 2 ms (typ. 1 ms) < 2 ms (typ. 1 ms) < 5 ms • Load step from 100 to 50 % < 2 ms (typ. 1 ms) < 2 ms (typ. 1 ms) < 5 ms Protection and monitoring Output overvoltage protection Current limitation 2.8 A 4.4 A 3.8 A Short-circuit protection Stabilized current characteristic down to 0 V Stabilized current characteristic down to 0 V RMS sustained short-circuit current < 3 A < 5 A < 4 A Overload/short-circuit indicator - - - Safety Galvanic isolation primary/secondary Yes, SELV output voltage V out acc. to EN 60950 Yes, SELV output voltage V out acc. to EN 60950 Protective class Class I Class I Class I Discharge current < 3.5 mA < 3.5 mA < 3.5 mA Stabilized current characteristic to typ. 14 V, electronic shutdown below that, automatic restart Yes, SELV output voltage V out acc. to EN 60950 TÜV test Yes Yes Yes CE marking Yes Yes Yes UL/cUL (CSA) approval Yes, cULus listed (UL 508, CSA 22.2 No. 14-M91), File E143289 Yes, cULus listed (UL 508, CSA 22.2 No. 14-M91), File E143289 Yes, cULus listed (UL 508, CSA 22.2 No. 14-M91), File E143289 FM approval - - - Appr. for use in marine vessels - - - Degree of protection (EN 60529) IP20 IP20 IP20 EMC Interference emission EN 55022 Class B EN 55022 Class B EN 55022 Class B Line harmonics limitation Not applicable - EN 61000-3-2 Interference immunity EN 61000-6-2 EN 61000-6-2 EN 61000-6-2 Operating specifications Ambient temperature range Transportation and storage temperature range Humidity rating Mechanical specifications Connections • Mains input L, N, PE • Output L+ • Output M 0 to +60 °C with natural convection 0 to +50 °C with natural convection 0 to +60 °C with natural convection -25 to +85 °C -25 to +85 °C -25 to +85 °C Climatic class 3K3 acc. to EN 60721, no condensation Climatic class 3K3 acc. to EN 60721, no condensation Climatic class 3K3 acc. to EN 60721, no condensation One screw-type terminal each for 2 x 0.5 to 1.5 mm 2 finely stranded, 2 x 0.5 to 2.5 mm 2 single-core One screw-type terminal each for 2 x 0.5 to 1.5 mm 2 finely stranded, 2 x 0.5 to 2.5 mm 2 single-core 1 screw-type terminal for 1 screw-type terminal for 1 screw-type terminal for 2 x 0.5 to 2.5 mm 2 2 x 0.5 to 2.5 mm 2 0.5 to 1 mm 2 One screw-type terminal each for 0.5 to 1 mm 2 finely stranded, 0.5 to 1.5 mm 2 single-core 1 screw-type terminal for 1 screw-type terminal for 2 screw-type terminals for 2 x 0.5 to 2.5 mm 2 2 x 0.5 to 2.5 mm 2 0.5 to 1 mm 2 Dimensions 80 x 135 x 120 80 x 135 x 120 160 x 80 x 62 (W x H x D) in mm Weight approx. 0.5 kg 0.5 kg 0.5 kg Mounting Snap-mounting on DIN rail EN 50022-35x15, wall mounting Snap-mounting on DIN rail EN 50022-35x15, wall mounting Snap-mounting on DIN rail EN 50022-35x15/7.5, wall mounting Accessories - - Mounting bracket 3 Siemens KT10.1 · 2004 3/3
Page 1 and 2: Catalog KT 10.1 • 2004 SITOP Powe
Page 3 and 4: SITOP Power supplies SITOP power LO
Page 5 and 6: Siemens KT10.1 · 2004 1/3
Page 7 and 8: and production areas to shipping. T
Page 9 and 10: SITOP power Introduction Overview o
Page 11 and 12: SITOP power 1 Selection guide In or
Page 13 and 14: SITOP power · Standard 24 V Single
Page 19: SITOP power · Standard 24 V Single
Page 41 and 42: SITOP power · Standard 24 V Three-
Page 51 and 52: SITOP power · Standard 24 V Additi
Page 59 and 60: SITOP power · Standard 24 V Uninte
Page 71 and 72:
SITOP power · Standard 24 V Uninte
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
SITOP power Alternative voltages 10
Page 79 and 80:
SITOP power Alternative voltages
Page 81 and 82:
SITOP power AS interface power supp
Page 83 and 84:
Power supply, type 2.4 A 7 A Order
Page 85 and 86:
SITOP power Customized 12 12/2 Desc
Page 87 and 88:
SITOP power Customized ■ FAX repl
Page 89 and 90:
LOGO!Power 13 13/2 LOGO!Power 5 V 1
Page 91 and 92:
LOGO!Power LOGO!Power 5 V Power sup
Page 93 and 94:
LOGO!Power LOGO!Power 12 V Power su
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Technical information and configura
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Dimension drawings 15 SITOP power N
Page 123 and 124:
Dimension drawings SITOP power Sing
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Dimension drawings SITOP power Addi
Page 131 and 132:
Dimension drawings SITOP power Unin
Page 133 and 134:
Dimension drawings SITOP power Alte
Page 135 and 136:
Dimension drawings LOGO!Power ■ D
Page 137 and 138:
Appendix 16 16/2 SITOP contact pers
Page 139 and 140:
Appendix SITOP contact persons ■
Page 141 and 142:
Appendix SITOP contact persons ■
Page 143 and 144:
Appendix Siemens contacts worldwide
Page 145 and 146:
Appendix Indexes ■ Order No. inde
Page 147 and 148:
Appendix Customer Support Our Servi
Page 149 and 150:
Appendix Notes 16 Siemens KT10.1 ·
Page 151 and 152:
Catalogs of the Automation and Driv
show all

Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

Create successful ePaper yourself

Delete template?

Save as template?