Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

More documents

Recommendations

Info

SITOP power Introduction Overview of product families SITOP modular The innovative SITOP modular power supplies feature a completely new concept. The highlight is the modular design comprising a basic unit which can be supplemented by addon modules with further functions. The modularity has no competition with respect to flexibility, simple handling and price/performance ratio. The basic units Compact and rugged basic units for 1-, 2- or 3-phase connection and with output currents from 5 A to 40 A are the basis of the stabilized 24 V supply. The 5 A and 10 A power supply units are unique, and can be connected to almost any network throughout the world thanks to their ultra-wide input range. Each basic unit can be fitted on a DIN rail and already has a comprehensive scope of functions. • 5 A and 10 A devices with ultra-wide input range for 1- and 2-phase operation • 20 A and 40 A devices for 1- or 3-phase operation • Adjustable output voltage up to 28.8 V for compensation of voltage drops • 3 LEDs for detailed signalling of the operating status • Power boost up to three times the rated current • Selectable short-circuit response: constant current or latching shutdown • Selectable output characteristic for parallel operation modular modular The add-on modules The functionality of the basic units can be expanded using add-on modules. The power supply is optimally integrated into the overall system using the signalling module. Immediate response to various operating statuses is possible and potential damage can be avoided. The buffer module provides effective protection against brief power failures which could lead to a plant standstill, loss of data or even machine damage if the 24 V side is not buffered. A redundancy module can also be used to provide redundant power supply. Thus the 24 V supply is guaranteed even in the worst case when a faulty power supply unit would affect the unit connected in parallel. The SITOP select diagnosis module The diagnosis module is the optimum expansion for all 24 V power supplies in order to divide and monitor the load current among several branch circuits. An overload or short-circuit in a feeder is reliably detected and selectively switched-off. Total failures of plants can be prevented because the 24 V supply for the other loads is maintained. Detailed signalling permits fast fault locating, and thus the minimizing of downtimes. 1/6 Siemens KT10.1 · 2004
SITOP power Introduction Overview of product families SITOP DC UPS The DC UPS modules provide optimum protection against longer power failures. DC UPS modules and battery modules expand SITOP power supply units with 24 V output voltage into uninterruptible power supplies with a rated output current up to 40 A. The transition from power supply mode to buffered mode is absolutely interruption-free. The DC UPS modules are provided as standard with all required protection and monitoring functions, thus providing high availability. The integral battery management function guarantees a long service life for the maintenance-free battery modules. Status messages concerning the operational readiness, battery status and battery lines are signaled by LEDs and floating contacts. The compact 6 A and 15 A DC UPS modules can also communicate via an interface, thus permitting simple integration into PC-based systems. and tested Tried and tested The SITOP range of power supply units has proven its reliability for many years already. The units offer graded performances with output currents from 2 A to 20 A and from 10 A to 40 A for single-phase and three-phase incoming supplies respectively. Thanks to the simple handling and numerous certifications, the 24 V power supply units are also suitable for export-oriented use in all standard automation engineering applications. And should it be the case that the power supply conditions are unreliable in a global application, the proven SITOP power supplies can of course also be combined with the DC UPS modules. The facets The SITOP power supply units also cover individual power supply requirements - whether standard industrial applications, extreme ambient conditions, or unusual output voltages. The SITOP variants include some true all-rounders: SITOP power 0.5: the mini devices with a width of only 22.5 mm are the narrowest in the SITOP family and are therefore particularly suitable for supplying low-voltage switchgear. SITOP power flexi: unlimited variety thanks to a variable output. The innovative circuit concept permits flexible setting of the output voltage between 3 V and 52 V. Special voltages can therefore also be covered by a standard device. SITOP power dual: the electronics supply for the switchgear cabinet. The DIN rail device is industry-compatible and has two 15 V outputs. For example, for electronic loads to be supplied with ±15 V. SITOP power 24 V/2.5 A, 4 A and 10 A: the devices with universal input can be connected to 1-phase AC voltage networks as well as to DC voltage networks. SITOP power 24 V/20 A: the 2-phase primary switched-mode regulator with 20 A rated output current is predestined for industrial networks with high AC voltages. The special widerange input allows connection to 3-phase networks with rated voltages between 500 V and 600 V. SITOP power AS-Interface: 2 primary switched-mode regulators are available especially for powering the actuator/sensor interface: a 2.4 A version with 24 V DC input and IP65 degree of protection, and a 7 A version with wide-range input for AC and DC voltages. The facets Siemens KT10.1 · 2004 1/7
Page 1 and 2: Catalog KT 10.1 • 2004 SITOP Powe
Page 3 and 4: SITOP Power supplies SITOP power LO
Page 5 and 6: Siemens KT10.1 · 2004 1/3
Page 7: and production areas to shipping. T
Page 11 and 12: SITOP power 1 Selection guide In or
Page 13 and 14: SITOP power · Standard 24 V Single
Page 41 and 42: SITOP power · Standard 24 V Three-
Page 51 and 52: SITOP power · Standard 24 V Additi
Page 59 and 60:
SITOP power · Standard 24 V Uninte
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
SITOP power Alternative voltages 10
Page 79 and 80:
SITOP power Alternative voltages
Page 81 and 82:
SITOP power AS interface power supp
Page 83 and 84:
Power supply, type 2.4 A 7 A Order
Page 85 and 86:
SITOP power Customized 12 12/2 Desc
Page 87 and 88:
SITOP power Customized ■ FAX repl
Page 89 and 90:
LOGO!Power 13 13/2 LOGO!Power 5 V 1
Page 91 and 92:
LOGO!Power LOGO!Power 5 V Power sup
Page 93 and 94:
LOGO!Power LOGO!Power 12 V Power su
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Technical information and configura
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Dimension drawings 15 SITOP power N
Page 123 and 124:
Dimension drawings SITOP power Sing
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Dimension drawings SITOP power Addi
Page 131 and 132:
Dimension drawings SITOP power Unin
Page 133 and 134:
Dimension drawings SITOP power Alte
Page 135 and 136:
Dimension drawings LOGO!Power ■ D
Page 137 and 138:
Appendix 16 16/2 SITOP contact pers
Page 139 and 140:
Appendix SITOP contact persons ■
Page 141 and 142:
Appendix SITOP contact persons ■
Page 143 and 144:
Appendix Siemens contacts worldwide
Page 145 and 146:
Appendix Indexes ■ Order No. inde
Page 147 and 148:
Appendix Customer Support Our Servi
Page 149 and 150:
Appendix Notes 16 Siemens KT10.1 ·
Page 151 and 152:
Catalogs of the Automation and Driv
show all

Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

Create successful ePaper yourself

Delete template?

Save as template?