Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

SITOP power · Standard 24 V
Single-phase and two-phase
Output current 5 A
4
Power supply, type 5 A 5 A 5 A
Order No. 6EP1 333-3BA00 6EP1 333-2BA00 6EP1 333-2AA00
Efficiency
Efficiency at V out rated , I out rated Approx. 87 % Approx. 87 % Approx. 87 %
Power loss at V out rated , I out rated Approx. 18 W Approx. 18 W Approx. 18 W
Control
Dyn. mains compensation
Approx. 0.1% Approx. ± 0.3 % V out Approx. ± 0.3 % V out
(V in rated ±15 %)
Dyn. load compensation
(I out : 50/100/50 %)
Approx. +3 % V out ±2.5% V out ±2.5% V out
Settling time
• Load step from 50 to 100 % < 5 ms (typ. 2 ms) typ. 0.2 ms typ. 0.2 ms
• Load step from 100 to 50 % < 5 ms (typ. 2 ms) typ. 0.2 ms typ. 0.2 ms
Protection and monitoring
Output overvoltage protection < 35 V Yes, acc. to EN 60950 Yes, acc. to EN 60950
Current limitation typ. 5.5 A typ. 5.5 to 6.5 A typ. 5.5 to 6.5 A
Short-circuit protection
Choice of stabilized current
characteristic approx. 5.5 A or
latching shutdown
Electronic shutdown, automatic
restart
RMS sustained short-circuit current Approx. 5.5 A < 17 A < 17 A
Overload/short-circuit indicator Yellow LED for "overload", red - -
LED for "latching shutdown"
Safety
Galvanic isolation
primary/secondary
Yes, SELV output voltage V out
acc. to EN 60950 and EN 50178
Yes, SELV output voltage V out
acc. to EN 60950
Electronic shutdown, automatic
restart
Yes, SELV output voltage V out
acc. to EN 60950
Protective class Class I Class I Class I
Discharge current < 3.5 mA (typ. 0.25 mA) < 3.5 mA (typ. 0.4 mA) < 3.5 mA (typ. 0.4 mA)
TÜV test Yes Yes; CB scheme Yes; CB scheme
CE marking Yes Yes Yes
UL/cUL (CSA) approval
Yes, cULus listed (UL 508, CSA
22.2 No. 14-M91), File E197259
Yes, UL listed (UL 508)
File E143289, CSA (CSA 22.2
No. 14-95)
FM approval - - -
Yes, UL listed (UL 508)
File E143289, CSA (CSA 22.2
No. 14-95)
Appr. for use in marine vessels - - -
Degree of protection (EN 60529) IP20 IP20 IP20
EMC
Interference emission EN 55022 Class B EN 55022 Class B EN 55022 Class B
Line harmonics limitation EN 61000-3-2 EN 61000-3-2 -
Interference immunity EN 61000-6-2 EN 61000-6-2 EN 61000-6-2
Operating specifications
Ambient temperature range
Transportation and storage
temperature range
Humidity rating
Mechanical specifications
Connections
• Mains input L, N, PE
• Output L+
• Output M
0 to +60 °C with natural
convection
0 to +60 °C with natural
convection
0 to +60 °C with natural
convection
-25 to +85 °C -25 to +85 °C -25 to +85 °C
Climatic class 3K3 acc. to
EN 60721, no condensation
Climatic class 3K3 acc. to
EN 60721, no condensation
Climatic class 3K3 acc. to
EN 60721, no condensation
One screw-type terminal each
for 0.2 to 2.5 mm 2 singlecore/finely
stranded
One screw-type terminal each
for 0.5 to 2.5 mm 2 singlecore/finely
stranded
One screw-type terminal each
for 0.5 to 2.5 mm 2 singlecore/finely
stranded
2 screw-type terminals for
1 screw-type terminal for
1 screw-type terminal for
0.2 to 2.5 mm 2 0.5 to 2.5 mm 2 0.5 to 2.5 mm 2
2 screw-type terminals for
2 screw-type terminals for
2 screw-type terminals for
0.2 to 2.5 mm 2 0.5 to 2.5 mm 2 0.5 to 2.5 mm 2
Dimensions (W x H x D) in mm 70 x 125 x 125 75 x 125 x 125 75 x 125 x 125
Weight approx. 1.2 kg 0.75 kg 0.57 kg
Mounting
Snap-mounting on DIN rail
EN 50022-35x15/7.5
Snap-mounting on DIN rail
EN 50022-35x15/7.5
Snap-mounting on DIN rail
EN 50022-35x15/7.5
Accessories
Buffer module (6EP1961-3BA00)
Signalling module (6EP1961-
3BA10)
Redundancy module (6EP1961-
3BA20)
- -
4/4
Siemens KT10.1 · 2004