Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

SITOP power · Standard 24 V
Single-phase and two-phase
Output current 10 A
The IP65 version The S7-300 type The flat design The universal type
Power supply unit with IP65
degree of protection, design
and functionality optimally
matched to ET 200X distributed
I/O devices. When using
without ET 200X, the connector
seal accessory is required.
The proven power supply in
the SIMATIC S7-300 design;
alternatively with PS-CPU
connecting comb for snapmounting
on S7 busbar or
without connecting comb for
snap-mounting on DIN rail
EN 500022-35x15 via mounting
adapter.
The flat design which is of
great advantage where only
low mounting depths are
available, e.g. for use with distributed
I/O, in machine
benches or alcoves; design
matched to SIMATIC ET 200B.
The universal power supply
unit for all supply networks,
with a wide-range input from
93 V to 264 V AC and 110 V to
350 V DC for supply from all
typical networks.
5
10 A 10 A 10 A 10 A
6EP1 334-2CA00 6ES7 307-1KA01-0AA0 /
6EP1 334-1AL12
6EP1 334-1SH01
6EP1334-1SL12
Single-phase AC Single-phase AC Single-phase AC Single-phase AC
120/230 V AC
Settable using wire jumper
120/230 V AC
Settable via selector switch on
120/230 V AC
Settable via selector switch on
120 to 230 V AC
wide-range input
device
device
93 to 132/187 to 264 V AC 85 to 132/170 to 264 V AC 85 to 132/170 to 264 V AC 93 to 264 V AC or 110 to
350 V DC
2.3 x V in rated , 1.3ms 2.3 x V in rated , 1.3 ms 2.3 x V in rated , 1.3 ms 2.3 x V in rated , 1.3 ms
> 20 ms at V in = 93/187 V > 20 ms at V in = 93/187 V > 20 ms at V in = 93/187 V > 20 ms at V in = 93/187 V
50/60 Hz, 47 to 63 Hz 50/60 Hz; 47 to 63 Hz 50/60 Hz; 47 to 63 Hz 0/50/60 Hz; 47 to 63 Hz
4.3/2.6 A 4.1/1.8 A 4/2.5 A 2.5 to 1.3 A
< 65 A, typ. 3 ms < 55 A, < 3 ms < 65 A, < 3 ms < 20 A, < 3 ms
< 2.5 A 2 s < 3.3 A 2 s < 3.3 A 2 s < 1.5 A 2 s
T 6.3 A/250 V (not accessible) T 6.3 A/250 V (not accessible) T 6.3 A/250 V (not accessible) T 6.3 A (not accessible)
From 16 A, Characteristic C From 10 A, Characteristic C From 10 A, Characteristic C From 16 A, Characteristic C
Stabilized, floating direct voltage Stabilized, floating direct voltage Stabilized, floating direct voltage Stabilized, floating direct voltage
24 V DC 24 V DC 24 V DC 24 V DC
±3% ±3% ±1% ±1%
Approx. 0.2 % Approx. 0.1 % Approx. 0.1 % < ± 0.1 %
Approx. 1 % Approx. 0.5 % Approx. 0.5 % < ± 0.2 %
< 150 mV pp < 150 mV pp (typ. 40 mV pp ) < 150 mV pp (typ. 50 mV pp ) < 100 mV pp
< 240 mV pp < 240 mV pp (typ. 100 mV pp ) < 240 mV pp (typ. 200 mV pp ) < 100 mV pp
22.8 to 25.2 V - 22 to 29 V -
Green LED for 24 V O.K. Green LED for 24 V O.K. Green LED for 24 V O.K. Green LED for 24 V O.K.
No overshoot of V out
(soft start)
No overshoot of V out
(soft start)
No overshoot of V out
(soft start)
No overshoot of V out
(soft start)
< 3 s/typ. 80 ms < 1.5 s/typ. 80 ms < 2 s/typ. 40 ms < 3 s/typ. 100 ms
10 A 10 A 10 A 10 A
0 to 10 A (up to +40 °C) 0 to 10 A 0 to 10 A 0 to 10 A
0 to 8 A (up to +55 °C) 0 to 10 A 0 to 10 A 0 to 10 A
typ. 35 A for 80 ms typ. 35 A for 700 ms Approx. 11 A constant current
typ. 38 A for 200 ms typ. 35 A for 150 ms typ. 35 A for 700 ms Approx. 11 A constant current
Yes, 2 Not permissible Yes, 2 Yes, 2
Continued on page 5/5.
Siemens KT10.1 · 2004 5/3