Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

More documents

Recommendations

Info

LOGO!Power LOGO!Power 15 V ■ Overview ■ Application LOGO!Power supplies are primary switched-mode power supplies that are optimized to the LOGO! logic modules in terms of functionality and design. With the wide input range of 85 V to 264 V AC, radio interference level B and assembly option in built-in miniature distribution boards, they can be used universally in a diverse range of applications in the low-end performance range. 13 ■ Technical specifications Power supply, type 15 V/1.9 A 15 V/4 A Order No. 6EP1 351-1SH02 6EP1 352-1SH02 Input Single-phase AC Single-phase AC Rated voltage V in rated 100 to 240 V AC 100 to 240 V AC wide-range input wide-range input Voltage range 85 to 264 V AC 85 to 264 V AC Overvoltage strength 2.3 x V in rated /1.3 ms 2.3 x V in rated /1.3 ms Mains buffering at I out rated > 40 ms at V in = 187 V > 40 ms at V in = 187 V Rated line frequency; range 50/60 Hz; 47 to 63 Hz 50/60 Hz; 47 to 63 Hz Rated current I in rated 0.63 to 0.33 A 1.24 to 0.68 A Inrush current limitation (+25 °C) < 15 A < 30 A I 2 t < 0.8 A 2 s < 3 A 2 s Integrated line-side fuse Internal Internal Recommended circuit-breaker From 16 A Characteristic B or From 16 A Characteristic B or (IEC 898) in mains supply line from 10 A Characteristic C from 10 A Characteristic C Output Stabilized, floating direct voltage Stabilized, floating direct voltage Rated voltage V out rated 15 V DC 15 V DC Total tolerance, static ± 3 % ± 3 % • Static mains compensation Approx. 0.1 % Approx. 0.1 % • Static load compensation Approx. 1.5 % Approx. 1.5 % Residual ripple < 200 mV pp < 200 mV pp (clock frequency approx. 90 kHz) Spikes (bandwidth approx. 20 MHz) < 300 mV pp < 300 mV pp Setting range 10.5 to 16.1 V 10.5 to 16.1 V Status display Green LED for output voltage Green LED for output voltage OK OK Power ON/OFF behavior No overshoot of V out (soft start) No overshoot of V out (soft start) Starting delay/voltage rise < 0.5 s/typ. 15 ms < 0.5 s/typ. 10 ms Rated current I out rated 1.9 A 4 A Current range up to +55 °C 0 to 1.9 A 0 to 4 A Parallel connection for increased Yes Yes output Continued on page 13/7. 13/6 Siemens KT10.1 · 2004
LOGO!Power LOGO!Power 15 V Power supply, type 15 V/1.9 A 15 V/4 A Order No. 6EP1 351-1SH02 6EP1 352-1SH02 Efficiency Efficiency at V out rated , I out rated typ. 80 % typ. 85 % Power loss at V out rated , I out rated typ. 7 W typ. 11 W Control Dyn. mains compensation < 0.2 % V out < 0.2 % V out (V in rated ± 15 %) Dyn. load compensation ± 2.8 % V out ± 3.3 % V out (I out : 10/90/10 %) Settling time • Load step from 10 to 90 % typ. 20 ms typ. 20 ms • Load step from 90 to 10 % typ. 20 ms typ. 20 ms Protection and monitoring Current limitation typ. 2.7 A typ. 5.0 A Short-circuit protection Stabilized current characteristic Stabilized current characteristic RMS sustained short-circuit current < 4 A < 8 A Overload/short-circuit indicator - - Safety Galvanic isolation primary/secondary Yes, SELV output voltage V out acc. to EN 60950 and EN 50178 Yes, SELV output voltage V out acc. to EN 60950 and EN 50178 Protective class Class II (without PE conductor) Class II (without PE conductor) CE marking Yes Yes UL/cUL (CSA) approval Yes, cULus listed (UL 508, CSA 22.2 No. 14-M95), File E197259; cURus recognized (UL 60950, CSA 22.2 No. 60950), File E151273 Yes, cULus listed (UL 508, CSA 22.2 No. 14-M95), File E197259; cURus recognized (UL 60950, CSA 22.2 No. 60950), File E151273 FM approval Yes, Class I Div. 2, Group A, B, C, D T4 Yes, Class I Div. 2, Group A, B, C, D T4 Appr. for use in marine vessels Yes, GL (Germanischer Lloyd) Yes, GL (Germanischer Lloyd) Degree of protection (EN 60529) IP20 IP20 EMC Interference emission EN 55022 Class B EN 55022 Class B Line harmonics limitation Not applicable Not applicable Interference immunity EN 61000-6-2 EN 61000-6-2 Operating specifications Ambient temperature range -20 to +55 °C with natural convection -20 to +55 °C with natural convection Transportation and storage -40 to +70 °C -40 to +70 °C temperature range Humidity rating Mechanical specifications Mains input connections L1, N Connections •Output + •Output - Climatic class 3K3 acc. to EN 60721, no condensation One screw-type terminal each for 0.5 to 2.5 mm 2 singlecore/finely stranded Climatic class 3K3 acc. to EN 60721, no condensation One screw-type terminal each for 0.5 to 2.5 mm 2 singlecore/finely stranded 2 screw-type terminals each for 0.5 to 2.5 mm 2 2 screw-type terminals each for 0.5 to 2.5 mm 2 Dimensions (W x H x D) in mm 54 x 90 x 55 72 x 90 x 55 Weight Approx. 0.17 kg Approx. 0.25 kg Mounting Snap-mounting on DIN rail EN 50022-35x15/7.5 Snap-mounting on DIN rail EN 50022-35x15/7.5 13 Siemens KT10.1 · 2004 13/7
Page 1 and 2:
Catalog KT 10.1 • 2004 SITOP Powe
Page 3 and 4:
SITOP Power supplies SITOP power LO
Page 5 and 6:
Siemens KT10.1 · 2004 1/3
Page 7 and 8:
and production areas to shipping. T
Page 9 and 10:
SITOP power Introduction Overview o
Page 11 and 12:
SITOP power 1 Selection guide In or
Page 13 and 14:
SITOP power · Standard 24 V Single
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
SITOP power · Standard 24 V Three-
Page 43 and 44: SITOP power · Standard 24 V Three-
Page 51 and 52: SITOP power · Standard 24 V Additi
Page 59 and 60: SITOP power · Standard 24 V Uninte
Page 77 and 78: SITOP power Alternative voltages 10
Page 79 and 80: SITOP power Alternative voltages
Page 81 and 82: SITOP power AS interface power supp
Page 83 and 84: Power supply, type 2.4 A 7 A Order
Page 85 and 86: SITOP power Customized 12 12/2 Desc
Page 87 and 88: SITOP power Customized ■ FAX repl
Page 89 and 90: LOGO!Power 13 13/2 LOGO!Power 5 V 1
Page 91 and 92: LOGO!Power LOGO!Power 5 V Power sup
Page 93: LOGO!Power LOGO!Power 12 V Power su
Page 97 and 98: LOGO!Power LOGO!Power 24 V Power su
Page 99 and 100: Technical information and configura
Page 121 and 122: Dimension drawings 15 SITOP power N
Page 123 and 124: Dimension drawings SITOP power Sing
Page 129 and 130: Dimension drawings SITOP power Addi
Page 131 and 132: Dimension drawings SITOP power Unin
Page 133 and 134: Dimension drawings SITOP power Alte
Page 135 and 136: Dimension drawings LOGO!Power ■ D
Page 137 and 138: Appendix 16 16/2 SITOP contact pers
Page 139 and 140: Appendix SITOP contact persons ■
Page 141 and 142: Appendix SITOP contact persons ■
Page 143 and 144: Appendix Siemens contacts worldwide
Page 145 and 146:
Appendix Indexes ■ Order No. inde
Page 147 and 148:
Appendix Customer Support Our Servi
Page 149 and 150:
Appendix Notes 16 Siemens KT10.1 ·
Page 151 and 152:
Catalogs of the Automation and Driv
show all

Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?