Timing Belt and Multi-V Belt Kits

4
5
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071
SKF TensiCheck measuring
The SKF TensiCheck device made by SKF is an accurate, universal belt tension
testing device which can be used on almost all car models.
It can be used to check both the timing belts and auxiliary belts (3 to 8 ribs)
contained in the SKF VKMA kits, along with many other automotive belt sizes.
Because it calculates the correct tension to be applied to each belt and compares
this tension with the tension of the installed belt, the user immediately knows if
the belt is correctly loaded (green “OK” lamp lights up),
insufficiently loaded (red “–” lamp
lights up) or over-loaded (red “+”
lamp lights up).
Moreover the accurate tension,
measured in daN, is displayed on the
3
right part of the screen.
1
2
10
6
7 8 9
11
mm / U daN
Having completed the correct belt and tensioner replacement procedure.
1. Before starting mesurement of a belt’s tension, turn the crankshaft two
revolutions and set it to the point where all the timing marks are aligned.
2. Press the red button to switch the SKF TensiCheck on.
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071