IDA 4 XM V 2.X - Radio MatÃ©riel

More documents

Recommendations

Info

CALL STATIONS > PRIORITY Priority The priority of the corresponding call station can be adjusted through the slider Priority. It can range from 0 to 100. User_manual_IDA4XM_V2.x.doc Page 20 of 51
CALL STATIONS > MESSAGES Message allocation on call station To allocate a message on a call station, the following procedure has to be done : • Select a message in the Messages on station list (up to 4 messages can be set on a PSS, MSGS1 to MSGS4) • Select the corresponding message in the Messages list (up to 32 messages can be configured in an application) • Click on the command button < to allocate the message Message deletion on call station Buzzer ON To delete a message on a call station, the following procedure has to be done : • Select an allocated message in the Messages on station list • Click on the command button Delete The check button Buzzer ON enables the call station buzzer in case of fault. User_manual_IDA4XM_V2.x.doc Page 21 of 51
Page 1 and 2: IDA 4 XM V 2.X Installation and con
Page 3 and 4: CONTENTS 1 SOFTWARE________________
Page 5 and 6: 1.2 MAIN Serial port Windows Langua
Page 7 and 8: 1.3 SETTINGS 1.3.1 Application Item
Page 9 and 10: 1.3.2 Site SITE > GENERAL Name Pass
Page 11 and 12: 1.3.3 Zones Four zones can be confi
Page 13 and 14: ZONES > EQUALIZATION Parametric equ
Page 15 and 16: Measures display If the check butto
Page 17 and 18: Key setting To define a key on a se
Page 19: CALL STATIONS > EQUALIZATION Parame
Page 23 and 24: MESSAGES > GENERAL Name Type The te
Page 25 and 26: MESSAGES > AUDIO Level The slider L
Page 27 and 28: MESSAGES > PRIORITY Priority The pr
Page 29 and 30: 1.3.5 Evacuation inputs Four evacua
Page 31 and 32: 1.3.6 Control inputs Four control i
Page 33 and 34: CONTROL INPUTS > ROUTING Routing Ro
Page 35 and 36: 0dB INPUTS > AUDIO Level The slider
Page 37 and 38: 0dB INPUTS > ROUTING Routing Source
Page 39 and 40: 1.3.8 Serial ports Two serial ports
Page 41 and 42: SERIAL PORTS > ZONES ALLOCATION COD
Page 43 and 44: 1.4 FAULT DESCRIPTION 1.4.1 Fault t
Page 45 and 46: LXXX OPENED LXXX IMPED. LXXX LEAKAG
Page 47 and 48: Log file The window Log file corres
Page 49 and 50: 2.2 BASE WIRING DIAGRAM User_manual
Page 51: 2.4 PC - IDA WIRING DIAGRAM 2.5 TEC

IDA 4 XM V 2.X - Radio MatÃ©riel

Create successful ePaper yourself

Delete template?

Save as template?