IDA 4 XM V 2.X - Radio MatÃ©riel

More documents

Recommendations

Info

Source deletion on control input Busy signal To delete a source on a control input, the following procedure has to be done : • Click on the command button Delete When an higher priority message or call is currently played on the zones allocated to the control input, either a relay is commuted on the selected contact output or a 400 Hz tone is played on the selected 0dB output. The roll list Busy signal selects the contact or the 0dB output. Tone must have been first stored on IDA’s memory. See section 3.4 MESSAGES > GENERAL to send the message “Tone” (wave file). User_manual_IDA4XM_V2.x.doc Page 32 of 51
CONTROL INPUTS > ROUTING Routing Routing The check buttons Routing enable the routing of the control input’s allocated source on defined zones. User_manual_IDA4XM_V2.x.doc Page 33 of 51
Page 1 and 2: IDA 4 XM V 2.X Installation and con
Page 3 and 4: CONTENTS 1 SOFTWARE________________
Page 5 and 6: 1.2 MAIN Serial port Windows Langua
Page 7 and 8: 1.3 SETTINGS 1.3.1 Application Item
Page 9 and 10: 1.3.2 Site SITE > GENERAL Name Pass
Page 11 and 12: 1.3.3 Zones Four zones can be confi
Page 13 and 14: ZONES > EQUALIZATION Parametric equ
Page 15 and 16: Measures display If the check butto
Page 17 and 18: Key setting To define a key on a se
Page 19 and 20: CALL STATIONS > EQUALIZATION Parame
Page 21 and 22: CALL STATIONS > MESSAGES Message al
Page 23 and 24: MESSAGES > GENERAL Name Type The te
Page 25 and 26: MESSAGES > AUDIO Level The slider L
Page 27 and 28: MESSAGES > PRIORITY Priority The pr
Page 29 and 30: 1.3.5 Evacuation inputs Four evacua
Page 31: 1.3.6 Control inputs Four control i
Page 35 and 36: 0dB INPUTS > AUDIO Level The slider
Page 37 and 38: 0dB INPUTS > ROUTING Routing Source
Page 39 and 40: 1.3.8 Serial ports Two serial ports
Page 41 and 42: SERIAL PORTS > ZONES ALLOCATION COD
Page 43 and 44: 1.4 FAULT DESCRIPTION 1.4.1 Fault t
Page 45 and 46: LXXX OPENED LXXX IMPED. LXXX LEAKAG
Page 47 and 48: Log file The window Log file corres
Page 49 and 50: 2.2 BASE WIRING DIAGRAM User_manual
Page 51: 2.4 PC - IDA WIRING DIAGRAM 2.5 TEC

IDA 4 XM V 2.X - Radio MatÃ©riel

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?