IDA 4 XM V 2.X - Radio MatÃ©riel

More documents

Recommendations

Info

0dB INPUTS > EQUALIZATION Parametric equalization The input audio signal can be adjusted with a 3-bands equalizer. The slider F defines the frequency between 20 and 19 000 Hz. The slider Q defines the Q parameter (which is corresponding to the bandwidth) between 1/3 and 12. The slider G defines the output level of the corresponding band between –12 and +12 dB. Copy / Paste The command buttons Copy and Paste enable the copy of one band settings on other bands. User_manual_IDA4XM_V2.x.doc Page 36 of 51
0dB INPUTS > ROUTING Routing Sources mode Routing The option button Sources mode selects the mode of routing : • Permanent The source is routed permanently to the fixed zones. • Modulation detection (VOX activation) The Source routing is active if the source level exceeds defined threshold. This threshold is adjustable through a slider from - 70 to +20 dB. The check buttons Routing enable the routing of the corresponding source on defined zones. User_manual_IDA4XM_V2.x.doc Page 37 of 51
Page 1 and 2: IDA 4 XM V 2.X Installation and con
Page 3 and 4: CONTENTS 1 SOFTWARE________________
Page 5 and 6: 1.2 MAIN Serial port Windows Langua
Page 7 and 8: 1.3 SETTINGS 1.3.1 Application Item
Page 9 and 10: 1.3.2 Site SITE > GENERAL Name Pass
Page 11 and 12: 1.3.3 Zones Four zones can be confi
Page 13 and 14: ZONES > EQUALIZATION Parametric equ
Page 15 and 16: Measures display If the check butto
Page 17 and 18: Key setting To define a key on a se
Page 19 and 20: CALL STATIONS > EQUALIZATION Parame
Page 21 and 22: CALL STATIONS > MESSAGES Message al
Page 23 and 24: MESSAGES > GENERAL Name Type The te
Page 25 and 26: MESSAGES > AUDIO Level The slider L
Page 27 and 28: MESSAGES > PRIORITY Priority The pr
Page 29 and 30: 1.3.5 Evacuation inputs Four evacua
Page 31 and 32: 1.3.6 Control inputs Four control i
Page 33 and 34: CONTROL INPUTS > ROUTING Routing Ro
Page 35: 0dB INPUTS > AUDIO Level The slider
Page 39 and 40: 1.3.8 Serial ports Two serial ports
Page 41 and 42: SERIAL PORTS > ZONES ALLOCATION COD
Page 43 and 44: 1.4 FAULT DESCRIPTION 1.4.1 Fault t
Page 45 and 46: LXXX OPENED LXXX IMPED. LXXX LEAKAG
Page 47 and 48: Log file The window Log file corres
Page 49 and 50: 2.2 BASE WIRING DIAGRAM User_manual
Page 51: 2.4 PC - IDA WIRING DIAGRAM 2.5 TEC

IDA 4 XM V 2.X - Radio MatÃ©riel

Create successful ePaper yourself

Delete template?

Save as template?