Dominion SX 3.1.6 User Guide - English - Raritan

Chapter 5: Network Settings and Services
b. Type the IP address of the PPP client in the PPP Client IP field.
The default is 10.0.0.2.
5. If you selected PPP Only as the modem access mode:
a. If you want to enable modem dialback, select the Enable Modem
Dial Back check box.
6. Click OK. Modem access is enabled.
Configuring IP Forwarding and Static Routes
You can enable IP forwarding. You can also create static routes if your
SX has two LAN ports or is configured for modem access.
Enable IP Forwarding
To enable IP forwarding:
1. Choose Setup > Static Routes. The Static Routes page opens,
containing an Enable IP Forwarding panel and a Static Routes List.
2. Go to the IP Forwarding panel and click the Enable IP Forwarding
checkbox.
3. Click OK. IP forwarding is enabled.
Add a New Static Route
To add a new Static Route:
1. Choose Setup > Static Routes. The Static Routes page opens,
containing an Enable IP Forwarding panel and a Static Routes List.
27