BREAKTHROUGH IN X-RAY DIFFRACTION GENERATORS! - Rigaku

More documents

Recommendations

Info

$The New Standard of X-ray Diffractometer: MultiFlex - Rigaku$

Specifications X-RAY GENERATOR • Maximum Load: 18kW • Tube Voltage: 20-60kV in 1kV steps • Tube Current: 10-300mA in 1mA steps [10-450mA (40kV) in 1mA steps (Optional)] • Stability of High Voltage: +/- 0.01% for a +/-10% variation in the line voltage and +/- 5°C change in ambient temperature • Ripple: 1% rms or less (at 60kV, 300mA) ROTATING ANODE ASSEMBLY • Material: Select one from Cu (standard), Cr, Fe, Co, Ni, Mo, Ag, W, and Au • Target diameter: 10cm (common to horizontal and vertical types) • Rotation speed: 6000rpm • Vacuum sealing for rotary shaft: Low torque type magnetic fluid sealing • Bearing: Ceramic bearing • Water sealing: Mechanical seal X-RAY SOURCE SIZE • Focal spot size on the target: 0.5 x 10mm 2 as standard (Option: 0.3 x 3mm 2 , 0.2 x2mm 2 , 0.1 x 1mm 2 ) • Effective size at 6° take-off angle: 0.05 x 10mm 2 (line focus), 0.5 x 1mm 2 (point focus) OPERATION PANEL • Manual control: Controller from the operation panel • External control: RS-232C interface is built-in to allow control from the host computer SAFETY DESIGN • An LED is used in the warning lamp to prolong life • Shutter functions are monitored. If failure occurs, the entire system will shut down. HEAT EXCHANGER (Optional) • Water cooled type or air cooled type heat exchanger are available RADIATION ENCLOSURE (Optional) • Radiation Enclosures: 1200 x 1000 and 1800 x 1000mm (each with fail safe release function) Rigaku/MSC, Inc., 9009 New Trails Dr., The Woodlands, TX 77381
X-RAY TAKE OFF DIRECTION • Horizontal type: 2 directions • Vertical type: 3 directions • X-ray take-off angle center: 6° TUBE HOUSING DESIGNS Rigaku/MSC, Inc., 9009 New Trails Dr., The Woodlands, TX 77381
Page 1 and 2: BREAKTHROUGH IN X-RAY DIFFRACTION G
Page 3: A New Electron Gun • Electric fie

BREAKTHROUGH IN X-RAY DIFFRACTION GENERATORS! - Rigaku

Create successful ePaper yourself

Delete template?

Save as template?