Presentation on System-Level Design and Verification using ADS ...

Ag ile nt T e c hno log ie s
Ag ile n t T e c h nolog ie s
Ag ile nt T e c hno log ie s
Agilent Technologies
Other RF Data-Based Behavioral Models
Lo a d P ull
Setup
• Simulation Control
Components that Create
Structured Data Sets To
Describe Circuit Behavior
• Data Set is used by a Unique
Component to implement
Model Behavior
LoadPullSetup
X5
Freq=1 GHz
Order=10
Pin_Start=-50 _dBm
Pin_Stop=-20 _dBm
Pin_Step=10 _dB
GamAng_Start=-180 _degrees
GamAng_Stop=180 _degrees
GamAng_Step=20 _degrees
GamMag_Start=0.1
GamMag_Stop=0.9
GamMag_Step=0.1
in
in
H1H2
Setup
Am p H1H2_S e tu p
X6
F re q =1.0 G Hz
Order=10
Pin_Start=-50.0 _dBm
Pin_Stop=-20.0 _dBm
Pin_Step=10.0 _dB
out
P2D
Setup
out
Am p lifie rP 2 D _ S e tu p
X1
Filename="p2dfile.p2d"
Order=10
F re q _S ta rt=1.0 G Hz
Freq_Stop=2.0 GHz
Freq_Step=0.1 GHz
Pin_Start=-50.0 _dBm
Pin_Stop=-20.0 _dBm
Pin_Step=10.0 _dB
AmpLoadPull
AMP 2
Da ta s e t="d a ta s e t.d s "
In s tru m e n tID = "X1 "
Am p H1H2
AMP 3
Da ta s e t="d a ta s e t.d s "
G1expr="Vout[1]/Vin[1]"
G2expr="Vout[2]/Vin[1]"
Am p lifie rP 2 D
AMP 1
F re q =1.0 G Hz
P2DFile="p2dfile.p2d"
I
Q
RF
IQ M o d ula to r
Setup
IQ_Mod_Setup
X2
F re q =1.0 G Hz
Order=10
Pin_Start=-40 _dBm
Pin_Stop=10 _dBm
Pin_Step=2 _dB
IQ_Mod_Data
X4
Da ta s e t="d a ta s e t.d s "
F re q =1.0 G Hz
In s tru m e n tID = "X1 "
Asia EEsof Spring Technology Forum Page 53