03.07.2014 Views

2011 Dodge Journey AE Page 1

2011 Dodge Journey AE Page 1

2011 Dodge Journey AE Page 1

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>2011</strong> <strong>Dodge</strong> <strong>Journey</strong> ABOUT THE VEHICLE<br />

SPEAKER NOTES<br />

Front Speakers:<br />

Dash:<br />

Upper Door:<br />

Lower Door:<br />

Speaker Adapter:<br />

Speaker Harness:<br />

Speaker Assembly:<br />

Speaker Assembly:<br />

Dimensions:<br />

Dash<br />

L: 3.43”<br />

W: 3.43”<br />

D: 1.75”<br />

Rear Speakers:<br />

Lower Door:<br />

Subwoofer:<br />

Speaker Adapter:<br />

Speaker Harness:<br />

Speaker Assembly:<br />

Speaker Assembly:<br />

Dimensions:<br />

Lower<br />

L: 6.00”<br />

W: 8.75”<br />

D: 3.25”<br />

3 1/2”<br />

N/A<br />

6X9”<br />

SA69<br />

TBA<br />

(2) Phillip Head Screws<br />

(4) T-20 Torx Screws<br />

Lower<br />

L: 5.87”<br />

W: 8.87”<br />

D: 3.25”<br />

6x9”<br />

TBA<br />

SA69<br />

N/A<br />

(4) T-20 Torx Screws<br />

TBA<br />

Make: <strong>2011</strong><br />

Model: <strong>Dodge</strong><br />

Year: <strong>Journey</strong><br />

Scosche Pro App<br />

STANDARD/OPTIONAL<br />

- AM/FM/Sat/Single Disc<br />

- Bluetooth/U-Connect<br />

- Navigation<br />

- Alpine Sound System<br />

- Steering Wheel Controls<br />

- 3.5mm AUX/USB/iPod Control And Charge<br />

APPLICATIONS<br />

Dash Type:<br />

Aftermarket Type:<br />

New Custom Dash<br />

TBA<br />

Aftermaket Kits:<br />

Aftermarket Kit: TBA<br />

Aftermarket Kit: TBA<br />

Harness/Interface/Adapters:<br />

Radio Harness: TBA<br />

Antenna Adapter: VWA3B<br />

Blue Fusion/Bluetooth: BT1000/BT1200<br />

AUX / iPod Interface: TBA<br />

Other:<br />

Auxilary / 3.5mm:<br />

USB Input:<br />

In Center Console<br />

In Center Console<br />

Under Passenger’s<br />

Front Seat<br />

FACTORY COLOR CODES<br />

12v Battery (+): Gray/Blue<br />

12v Accessory (+): Data<br />

12v Ground (-): Black<br />

12v Amp Turn On (+): Data<br />

Illumination:<br />

Data<br />

Left Front Speaker (+): TBA<br />

Left Front Speaker (-): TBA<br />

Right Front Speaker (+): TBA<br />

Right Front Speaker (-): TBA<br />

Left Rear Speaker (+): TBA<br />

Left Rear Speaker (-): TBA<br />

Right Rear Speaker (+): TBA<br />

Right Rear Speaker (-): TBA


<strong>2011</strong> <strong>Dodge</strong> <strong>Journey</strong> VEHICLE DISASSEMBLY<br />

PRELIMINARY:<br />

Disconnect the negative battery cable.<br />

RADIO<br />

Make:<br />

Model:<br />

Year:<br />

<strong>Dodge</strong><br />

<strong>Journey</strong><br />

<strong>2011</strong><br />

Scosche Pro App<br />

DASH SPEAKERS<br />

1. Use PRT to unclip trim on the right side of the radio, use<br />

pick to release clips in the air vent then remove.<br />

2. Use PRT to unclip trim on the left side of the radio and remove.<br />

3. Use PRT to unclip panel below the radio and remove.<br />

4. Unscrew (2) T-15 torx securing the radio face, unplug and<br />

remove.<br />

5. Unscrew (4) T-15 torx securing the radio, unplug and remove.<br />

6. Unscrew (2) T-15 torx on the bottom of the touch screen bezel,<br />

use PRT to unclip the touch screen bezel then unplug and<br />

remove.<br />

FRONT DOOR SPEAKERS<br />

1. Pull down the gasket at the a-pillar on the driver and<br />

passengers side.<br />

2. Use PRT to unclip the a-pillar on the driver and passengers<br />

side then remove.<br />

3. Use PRT to unclip dash panel and remove.<br />

4. Unscrew (2) phillip head screws securing the speaker using<br />

a right angle adapter, unplug and remove.<br />

REAR DOOR SPEAKERS<br />

1. Remove door pull pouch liner and Unscrew (1) T-27 torx.<br />

2. Use pick to remove plastic cover located behind the door<br />

handle.<br />

3. Unscrew (1) 10mm bolt and (1) phillips head screw located<br />

behind the panel just removed.<br />

4. Use PRT to unclip window switch, unplug and remove.<br />

5. Use PRT to unclip door panel, unplug and remove.<br />

6. Unscrew (4) T-20 torx securing the speaker, unplug and<br />

remove.<br />

1. Remove door pull pouch liner and Unscrew (1) T-27 torx.<br />

2. Use pick to remove plastic cover located behind the door<br />

handle.<br />

3. Unscrew (1) 10mm bolt and (1) phillips head screw located<br />

behind the panel just removed.<br />

4. Use PRT to unclip window switch, unplug and remove.<br />

5. Use PRT to unclip door panel, unplug and remove.<br />

6. Unscrew (4) T-20 torx securing the speaker, unplug and<br />

remove.


<strong>2011</strong> <strong>Dodge</strong> <strong>Journey</strong> VEHICLE DISASSEMBLY<br />

PRELIMINARY:<br />

Disconnect the negative battery cable.<br />

REAR SIDE SPEAKERS<br />

Make:<br />

Model:<br />

Year:<br />

<strong>Dodge</strong><br />

<strong>Journey</strong><br />

<strong>2011</strong><br />

Scosche Pro App<br />

SUBWOOFER<br />

TBA.<br />

AMPLIFIER<br />

TBA.<br />

OTHER<br />

1. Unscrew (3) 10mm bolts, unplug and remove.<br />

TBA.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!