You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>2009</strong>-13<br />
<strong>Ford</strong> <strong>Flex</strong><br />
ABOUT THE VEHICLE<br />
Make: <strong>Ford</strong><br />
Model: <strong>Flex</strong><br />
Year: <strong>2009</strong>-13<br />
STANDARD/ OPTIONAL<br />
- AM/FM/MP3 in-dash multi CD Player<br />
- USB/3.5mm Aux/mp3 input<br />
- Satellite Radio Capable<br />
- Steering Wheel Controls<br />
SPEAKER NOTES<br />
Front Speakers<br />
A Pillar: 1”<br />
Center Dash: 3 1/2“<br />
Lower Door: 6X8”<br />
Speaker Adapter: SA68<br />
Speaker Harness: TBA<br />
Speaker Assembly: (2) 5.5mm Hex Head screws.<br />
Dimensions: Tweeter Center Door<br />
L: 0.000 L: 3.492 L: 8.070<br />
W: 0.000 W: 3.492 W: 5.715<br />
D: 0.000 D: 1.631 D: 2.285<br />
Rear Speakers<br />
Door: 6X8”<br />
Rear Pillar: 3 1/2“<br />
Subwoofer: 8”<br />
Speaker Adapter: SA68<br />
Speaker Harness: TBA<br />
Speaker Assembly: (2) 5.5mm Hex Head screws.<br />
Dimensions: Door Pillar SUB<br />
L: 8.070 L: 3.492 L: 8.542<br />
W: 5.715 W: 6.492 W: 8.542<br />
D: 2.285 D: 1.631 D: 4.535<br />
APPLICATIONS<br />
Dash Type: New Customr Dash<br />
Aftermarket Type: Single/Double Din<br />
Aftermarket Kit: FD1439B<br />
Harness:<br />
FDSR<br />
Antenna Adapter: CRAB/CRARB<br />
Auxiliary/USB Input: Center Console<br />
FACTORY<br />
OEM<br />
COLOR<br />
COLOR CODES<br />
CODES<br />
(+)12v +12 Volt Battery: Constant: Lt. Green/ White/Red Purple<br />
(+)12v +12 Volt Accessory: Acessory: Pink/ Data Black<br />
(-) 12v Ground: Ground: Black/ Black/Blue Lt. Green<br />
(+)12v Illumination:<br />
Amp Turn On: Lt. Blue/ Data Red<br />
Left Front Front Left Speaker Positive: (+): Orange/ White Lt. Green<br />
Left Front Front Left Speaker Negative: (-): Lt. Blue/ White/Brown<br />
Red<br />
Right Front Front Right Speaker Positive: (+): White/ White/Purple<br />
Lt. Green<br />
Right Front Front Right Speaker Negative: (-): Drk. Green/ White/Orange<br />
Left Rear Rear Left Speaker Positive: (+): Gray/ White/Green<br />
Lt. Blue<br />
Left Rear Rear Left Speaker Negative:: (-): Tan/ Brown/Yellow<br />
Right Rear Right Rear Speaker Positive: (+): Orange/ Brown/White Red<br />
Right Rear Right Rear Speaker Negative: (-): Brown/ Brown/Blue Pink
<strong>2009</strong>-13<br />
<strong>Ford</strong> <strong>Flex</strong><br />
PRELIMINARY:<br />
Disconnect the negative battery cable.<br />
RADIO REMOVAL<br />
VEHICLE DISASSEMBLY<br />
Make:<br />
<strong>Ford</strong><br />
Model: <strong>Flex</strong><br />
Year: <strong>2009</strong>-13<br />
CENTER DASH<br />
1. With Pick Tool, unclip the shifter release cap and shift vehicle to “D”.<br />
2. With Panel Removal Tool, unclip the trim bezel surrounding shifter.<br />
3. With Panel Removal Tool, unclip and remove shifter panel starting<br />
from armrest moving towards the dash and extract (2) 7mm Hex<br />
Head screws located on the lower portion of Radio Panel.<br />
4. With Panel Removal Tool, unclip Set-Up/Info/Hazard trim bezel,<br />
unplug, remove and extract (2) 7mm Hex Head screws from top<br />
portion of the Radio Panel, above A/C vents.<br />
5. With Panel Removal Tool, unclip front/side center console panels<br />
and extract (1) 7mm Hex Head screw from each side.<br />
6. With panel Removal Tool, unclip Radio Panel, unplug and remove.<br />
7. Extract (4) 7mm Hex Head screws securing Radio, unplug and<br />
remove.<br />
A PILLAR<br />
1. With Panel Removale Tool, unclip Speaker Grill.<br />
2. Extract (2) 7mm screws securing Speaker, unplug and remove.<br />
FRONT DOOR<br />
OEM COLOR CODES<br />
+12 Volt Constant: Lt. Green/ Purple<br />
+12 Volt Acessory: Pink/ Black<br />
Ground: Black/ Lt. Green<br />
1. With Panel Removal Tool, remove the weather strip.<br />
2. With Panel Removal Tool, unclip Pillar Panel then with Pick Tool,<br />
unclip Safety clip securing Pillar Panel, unplug and remove Panel.<br />
3. With Panel Removal Tool, unclip Tweeter from panel.<br />
Rear Right Positive:<br />
Rear Right Negative:<br />
Orange/ Red<br />
Brown/ Pink<br />
1. With Panel Removal Tool, unclip and remove Red Reflector from<br />
top outside corner of door panel.<br />
2. Extract (6) Phillips Head Screws from perimeter of door.<br />
3. With Pick Tool, unclip panel inside door handle and extract (1)<br />
<strong>10</strong>mm bolt from behind.<br />
4. With Pick Tool, unclip panel inside door grip and extract (1) <strong>10</strong>mm<br />
bolt from behind.<br />
5. Lift Door Panel, unplug and remove.<br />
6. Extract (2) 5.5mm Hex Head Screws securing Speaker, unplug and<br />
remove.
<strong>2009</strong>-13<br />
REAR DOOR<br />
<strong>Ford</strong> <strong>Flex</strong><br />
PRELIMINARY:<br />
Disconnect the negative battery cable.<br />
VEHICLE DISASSEMBLY<br />
Make: <strong>Ford</strong><br />
Model: <strong>Flex</strong><br />
Year: <strong>2009</strong>-13<br />
SUBWOOFER<br />
1. With Panel Removal Tool, unclip and remove Red Reflector from<br />
top outside corner of door panel.<br />
2. Extract (5) Phillips Head Screws from perimeter of door.<br />
3. With Pick Tool, unclip panel inside door handle and extract (1)<br />
<strong>10</strong>mm bolt from behind.<br />
4. With Pick Tool, unclip panel inside door grip and extract (1) <strong>10</strong>mm<br />
bolt from behind.<br />
5. Lift Door Panel, unplug and remove.<br />
6. Extract (2) 5.5mm Hex Head Screws securing Speaker, unplug and<br />
remove.<br />
REAR PILLAR<br />
1. With Panel Removal Tool, unclip (2) screw caps and extract (1)<br />
7mm screws inside each screws cap.<br />
2. Remove Weather strip.<br />
3. With Panel Removal Tool, unclip Rear Pillar Panel, unplug and<br />
remove.<br />
4. With Panel Removal Tool, unclip Speaker from panel.<br />
1. With Panel Removal Tool, remove (2) plastic clips located on the<br />
inside corners of the tailgate running board.<br />
2. With Panel Removal Tool, unclip tailgate running board and<br />
remove.<br />
3. With Panel Removal Tool, unclip (2) screw caps on the Rear Right<br />
Pillar Panel and extract (1) 7mm screws inside each screw cap.<br />
4. Remove weather strip.<br />
5. With Panel Removal Tool, unclip Rear Right Pillar Panel, unplug<br />
and remove.<br />
6. With your fingers, unscrew (2) plastic clips on the right side<br />
utilized to strap a cargo net.<br />
OEM COLOR CODES<br />
7. Extract rear right passanger seatbelt lower bolt using a T-50 Torx.<br />
8. With Panel Removal Tool, unclip rear right passanger running<br />
+12 board Volt and extract Constant: (1) ¼” screw. Lt. Green/ Purple<br />
+12 Volt Acessory: Pink/ Black<br />
Ground: Black/ Lt. Green<br />
9. With Panel Removal Tool, unclip screw cap from rear right upper<br />
panel betweet the rear door and rear side window and extract<br />
(1) 7mm screw.<br />
<strong>10</strong>. With Panel Removal Tool, unclip rear right panel between rear<br />
door and rear side window and place it out of the way.<br />
11. With Panel Removal Tool, unclip subwoofer panel, unplug and<br />
Rear Right Positive:<br />
Rear remove.. Right Negative:<br />
Orange/ Red<br />
Brown/ Pink<br />
12. Extract (3) <strong>10</strong>mm screws securing Subwoofer enclosure, unplug<br />
amplifier and with panel removal tool, unclip and remove<br />
subwoofer enclosure.<br />
13. Extract (1) 8mm screw securing subwoofer to enclosure located<br />
on the back of the enclosure.<br />
14. Extract (8) Phillips Head Screws securing Subwoofer from the<br />
front side, unplug and remove.
<strong>2009</strong>-13<br />
<strong>Ford</strong> <strong>Flex</strong><br />
PRELIMINARY:<br />
Disconnect the negative battery cable.<br />
SUBWOOFER AMPLIFIER<br />
VEHICLE DISASSEMBLY<br />
Make:<br />
<strong>Ford</strong><br />
Model: <strong>Flex</strong><br />
Year: <strong>2009</strong>-13<br />
SPEAKERS AMPLIFIER<br />
1. With Panel Removal Tool, remove (2) plastic clips located on the<br />
inside corners of the tailgate running board.<br />
2. With Panel Removal Tool, unclip tailgate running board and<br />
remove.<br />
3. With Panel Removal Tool, unclip (2) screw caps on the Rear Right<br />
Pillar Panel and extract (1) 7mm screws inside each screw cap.<br />
4. Remove weather strip.<br />
5. With Panel Removal Tool, unclip Rear Right Pillar Panel, unplug and<br />
remove.<br />
6. With your fingers, unscrew (2) plastic clips on the right side utilized<br />
to strap a cargo net.<br />
7. Extract rear right passanger seatbelt lower bolt using a T-50 Torx.<br />
8. With Panel Removal Tool, unclip rear right passanger running<br />
board and extract (1) ¼” screw.<br />
9. With Panel Removal Tool, unclip screw cap from rear right upper<br />
panel betweet the rear door and rear side window and extract (1)<br />
7mm screw.<br />
<strong>10</strong>. With Panel Removal Tool, unclip rear right panel between rear<br />
door and rear side window and place it out of the way.<br />
11. With Panel Removal Tool, unclip subwoofer panel, unplug and<br />
remove..<br />
12. Extract (4) Phillips Head Screws securing amplifier to subwoofer<br />
enclosure, unplug and remove.<br />
1. With Panel Removal Tool, remove (2) plastic clips located on the<br />
inside corners of the tailgate running board.<br />
2. With Panel Removal Tool, unclip tailgate running board and<br />
remove.<br />
3. With Panel Removal Tool, unclip (2) screw caps on the Rear Right<br />
Pillar Panel and extract (1) 7mm screws inside each screw cap.<br />
4. Remove weather strip.<br />
5. With Panel Removal Tool, unclip Rear Right Pillar Panel, unplug<br />
and remove.<br />
OEM COLOR CODES<br />
6. With your fingers, unscrew (2) plastic clips on the right side<br />
utilized to strap a cargo net.<br />
7. Extract rear right passanger seatbelt lower bolt using a T-50 Torx.<br />
8. With Panel Removal Tool, unclip rear right passanger running<br />
+12 Volt Constant: Lt. Green/ Purple<br />
+12 Volt Acessory: Pink/ Black<br />
board and extract (1) ¼” screw.<br />
Ground: Black/ Lt. Green<br />
9. With Panel Removal Tool, unclip screw cap from rear right upper<br />
panel betweet the rear door and rear side window and extract<br />
Rear (1) 7mm Right screw. Positive:<br />
Rear Right Negative:<br />
Orange/ Red<br />
Brown/ Pink<br />
<strong>10</strong>. With Panel Removal Tool, unclip rear right panel between rear<br />
door and rear side window and place it out of the way.<br />
11. With Panel Removal Tool, unclip subwoofer panel, unplug and<br />
remove..<br />
12. Extract (3) <strong>10</strong>mm screws securing Subwoofer enclosure, unplug<br />
amplifier and with panel removal tool, unclip and remove<br />
subwoofer enclosure.<br />
13. Extract (2) <strong>10</strong>mm screws securing Amplifier, unplug, lift and<br />
remove.