VSA-E03 - Service.pioneer-eur.com - Pioneer

Preparations
SPEAKER setting mode
Establishes the size and configuration of the speaker system you have connected.
In the display, “F”, “C”, and “S” refer to front, center, and surround speakers respectively. Speaker size is denoted as
“L” for large speakers, “S” for small speakers, and “∗” (asterisk) if no speaker is connected.
memo
SIGNAL
SELECT
ANALOG
If the cone size of your speaker is larger than 12 cm, please set to Large.
SP A
dB
1 Press % or fi to set the front speaker.
SET UP
2
2
Front speaker (initial setting is “L (Large)”)
• Select “FL” if your speakers will reproduce bass frequencies effectively or
if you did not connect a sub woofer.
• Select “FS” to send bass frequencies to the sub woofer. (The center and
surround speakers cannot be set to Large if the front speakers are set to
Small. In this case, all bass frequencies are sent to the sub woofer.)
SIGNAL
SELECT
ANALOG
SP A
dB
2 Press % or fi to set the center speaker.
2
2
Center speaker (initial setting is “L (Large)”)
• Select “CL” if your speaker will reproduce bass frequencies effectively.
• Select “CS” to send bass frequencies to the other speakers or sub woofer.
• Select “C∗” if you did not connect a center speaker. In this case, the
center channel is output from the front speakers.
SIGNAL
SELECT
ANALOG
SP
A
dB
3 Press % or fi to set the surround speaker.
* Press ⁄ to advance to the
next setting, and press ! to
return to previous setting.
Surround speaker (initial setting is “L (Large)”)
• Select “SL” if your speakers will reproduce bass frequencies effectively.
• Select “SS” to send bass frequencies to the other speakers or sub woofer.
• Select “S∗” if you did not connect surround speakers. In this case, the
sound of the surround channels is output from the front and center
speakers.
15
En