VSA-E03 - Service.pioneer-eur.com - Pioneer
VSA-E03 - Service.pioneer-eur.com - Pioneer
VSA-E03 - Service.pioneer-eur.com - Pioneer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Preparations<br />
Low cut filter ON/OFF setting mode<br />
Turn the low cut filter ON when distorted sound is output through the sub woofer.<br />
memo<br />
• Initial setting is “OFF”.<br />
• If the SUB WOOFER is set to “OFF” in the SUB WOOFER ON/OFF setting mode, the low cut filter cannot be<br />
set.<br />
SET UP<br />
SIGNAL<br />
SELECT<br />
ANALOG<br />
SP A<br />
Press % or fi to select low cut filter ON or OFF.<br />
dB<br />
FRONT speaker distance setting mode<br />
Sets the distance from the FRONT speaker to the listening position.<br />
memo<br />
• Initial setting is 3 m.<br />
• One step equals about 0.3 m.<br />
SIGNAL<br />
SELECT<br />
ANALOG<br />
SP A<br />
dB<br />
Press % or fi to set the distance of the FRONT speaker from<br />
the main listening position (up to 30 steps).<br />
CENTER speaker distance setting mode<br />
Normally as the Center speaker is placed directly in front in the listening room, it is closer to the listening position than<br />
the Front speakers. This means that the sound from the Center speaker will be heard before the Front speakers. To<br />
prevent this, set the Center speaker distance setting to delay the sound from the Center speaker so that the sound from<br />
the Front and Center speakers will be heard at the same time.<br />
memo<br />
• Initial setting is 3 m.<br />
• When “C∗” is selected in SPEAKER setting mode, the Center distance cannot be set.<br />
• One step equals about 0.3 m.<br />
SIGNAL<br />
SELECT<br />
ANALOG<br />
SP A<br />
dB<br />
Press % or fi to set the distance of the CENTER speaker from<br />
the main listening position (up to 30 steps).<br />
SURROUND speaker distance setting mode<br />
Use to set the SURROUND speaker distance. Like the CENTER speaker position, the SURROUND speakers may be set<br />
in a location closer or farther than the FRONT speakers. Set the distance of the SURROUND speakers accurately to hear<br />
sounds <strong>com</strong>ing from both FRONT and SURROUND speakers at the same time.<br />
memo<br />
• Initial setting is 3 m.<br />
• When “S∗” is selected in SPEAKER setting mode, the SURROUND distance cannot be set.<br />
• One step equals about 0.3 m.<br />
SIGNAL<br />
SELECT<br />
ANALOG<br />
SP A<br />
dB<br />
Press % or fi to set the distance of the SURROUND speaker<br />
from the main listening position (up to 30 steps).<br />
17<br />
En