It's all on the web www.lorexcctv.com V I S I T - Smarthome

5. Operate the Camera
light shows the
current channel
repeatedly press
to choose channel
Use the channel selector switch to set the accessory
wireless camera to a different channel than the other
wireless cameras that are already connected.
Holding this button for 3 seconds turns the camera
ON/OFF. An LED light will be illuminated when the
camer is set to “ON”.
It’s <strong>all</strong> on the web
Product Information
User Manuals
Specification Sheets
Software Upgrades
Quick Start Guides Firmware Upgrades
BUSINESS & HOME
ACCESSORY 2.4 GHz 4 CHANNEL
B&W WEATHER RESISTANT*
CAMERA
Model SG6223
For optimum reception, you may need to try changing
to alternate channels on both the receiver and camera, between
1-4.
Please refer to the Owner’s Manual of your original system
for instructions on setting the Dwell Time and Auto Scanning
Congratulations! You have successfully
expanded your Wireless Security System.
Specifications
Image Device
CMOS B&W
Resolution
240 TV lines
Lens
3.6 mm
Illumination
0 LUX @ F2.0 with IR LEDs
Power Requirement
500 mA (included)
Dimensions 2.5” x 3.5” x 1.5”
Housing
White
V I S I T
www.lorexcctv.com
Lorex Technology Inc.
Copyright © 2006 Lorex Technology Inc
As our products are subject to continuous improvement, SVII and its
subsidiaries reserve the right to modify product design, specifications
and prices, without notice and without incurring any obligation. E&OE
Quick Set-up Guide
* IP44 rated for Indoor and Outdoor use. Not recommended for direct
exposure to water, rain or snow

1. Confirm Package Contents 2. Inst<strong>all</strong> the Camera 4. Camera Controls & Functions
SG6223 camera with sunshade visor
a) Inst<strong>all</strong> the camera to the supplied bracket (w<strong>all</strong>
mount or clip-on). Refer to options below:
FRONT/SIDE VIEW
and mounting bracket
W<strong>all</strong> mount
bracket
7
1
5
Standard AC Adapter
Option #1
W<strong>all</strong>
Clip-on
Option #2
2
3
8
Bonus clip-on camera stand
b) For option #1 attach the bracket to the w<strong>all</strong> or
ceiling where you want to inst<strong>all</strong> the camera.
6
4
Features:
• Weather Resistant camera for Indoor/ Outdoor use*
• 4 Channel selectable camera
• New Ultra Slim design
• Automatic IR illumination in low light conditions**
• Listen-in audio
Mounting Screws
• 300 ft. wireless transmission (open space)†
* IP44 rated for Indoor and Outdoor use. Not recommended for direct exposure to water,
rain or snow.
** IR illumination range of 6 ft. under ideal conditions. Objects at or beyond this range may
be parti<strong>all</strong>y or completely obscured, depending on the camera application.
† Maximum open space transmission range. Actual range dependent upon building
materials and other obstruction in path of wireless signal.
For option #2 connect the clip-on stand onto
any object
The mounting bracket (option #1) is designed to
permanently mount the camera (i.e. to w<strong>all</strong> or ceiling)
3. Connect the Power
To power outlet
DC IN jack
c) Connect the supplied 9V DC adapter to the DC
IN jack at the rear of the camera.
d) Plug the 9V DC adapter to the power outlet.
e) To turn the camera power ON/OFF, hold the
Channel button for 3 seconds (by default the
camera is ON).
1. Microphone – Built-in condenser microphone
provides listen-in audio capability from camera to
monitor
2. Lens – B&W CMOS Image Sensor
3. 6 Infrared LED’s – Enhances the picture quality in low
light conditions
4. Channel Selector/Power Button – Selects channels 1-
4. Hold for 3 seconds to turn the power ON/OFF.
5. Bracket – Plastic bracket connects to camera for
mounting to w<strong>all</strong>s, ceilings or table
6. DC IN Jack – Connects to the 9V DC (500mA)
adapter.
7. Sunshade Visor – Protects camera from the elements
and blocks from the camera from the direct glare of the
sun.
8. LED Channel Indicator – Shows the channel (1-4)
that the camera is set to.