Heavy current engineering Angular position ... - Camille Bauer AG

Overview
Overview of the instrument families
Camille Bauer
Multifunctional Transducers, Overview
SINEAX M56x SINEAX DME4 SINEAX CAM
Measuring system
Sampling values per system period 24 32 128 (continuously)
Accuracy class
0.5
Analogue outputs: 0.25
Measured variables of bus: 0.2
Basic instrument: 0.2
I/O modules: 0.1
Setting time (at 50 Hz) ≥ 1.0s, depending on the system ≥ 0.3s, depending on the system
configuration and the selected configuration and the selected
≥ 0.06s
measured variables
measured variables
Nominal frequency 50/60 Hz 16.7 Hz, 50/60 Hz 45…65 Hz, 10…70 Hz, 10…140 Hz
Nominal current 1…6 A 1…6 A 1…5 A, Overriding up to 10 A
Nominal voltage 57.7…400 V (Ph–N)
57.7…400 V (Ph–N)
57…400 V (Ph–N)
Measured variables
100…693 V (Ph–Ph)
100…693 V (Ph–Ph)
100..693 V (P–P)
Basic variables of the system 1 • • •
Neutral wire current measurement •
Meters • •
Tariff switching for meters •
Unbalance •
THD, TDD, harmonics Up to the 50th harmonic
Maximum and minimum value
with time stamp
•
Mean value acquisition •
Logger for measured value
progression
Option
Alarm / event / operator lists Option
Display of measured values and
lists, acknowledgement of alarms
Measured values + meters with
accessory SINEAX A200
Option (internal or external)
I/O interface fixed fixed modular (up to 4 modules)
Analogue outputs 1, 2 or 3 2 or 4 2 per module
Analogue inputs 2 per module
Digital outputs 4 or 2 3 per module
Digital inputs 3 per module
HV input 110/230 VAC 1 per module
Possible bus connections
Special software functions
RS485 (Modbus), Profibus, LON As a standard:
RS485 (Modbus) + USB
Option: Ethernet IEC 61850 or
Modbus/TCP
System check • •
Check of connection •
Logic module •
1 The basic variables of the system are all single and system variables of voltage, current, bimetal current, active, reactive and apparent power,
reactive and power factor as well as frequency
19