Heavy current engineering Angular position ... - Camille Bauer AG

EMMOD204
EMMOD205
Camille Bauer
Accessories for A210, A220, A230s, A230
Extension module Profibus DP
For power instruments A210, A220, A230s, A230.
Customer benefit
• Cyclic transmission of the desired process image or system state
• Simple and fast commissioning
Application
The EMMOD204 extension module is simply snapped onto the back of the A210, A220, A230 or
A230s power instrument and is supplied with power by the same.
Parameterising uses GSD. All instrument parameters can be engineered in the control system. On
site, only the slave address is set. Required measured data is determined during engineering and
arranged as a fixed process image (up to 34 measured value modules). All instantaneous values as
well as meter readings are available as measured variables for selection. After the acquisition of the
configuration, the device transfers the process image cyclicly to the control system.
Technical data
Connection: 9-pin D-sub socket, EIA RS485 standard, 15 kV ESD protection
Type: DPV0, SPC4-2. Baud rate automatic or 9600 bit/s to 12 Mbit/s
Article No. Description
158 510 Extension module EMMOD204
For retrofitting. For mounted version see the respective basic instrument.
Further devices with Profibus DP interface
For DME406, programmable multi-transducer with Profibus-DP interface, see Page 24
For A2000, multifunctional power transducers with display, see Page 33
Extension module LON
For power instruments A210, A220, A230s, A230.
Customer benefit
• Instantaneous values and meter readings can be acquired via LONTALK protocol
• Direct connection to the U160x summator of Gossen-Metrawatt is possible
Application
The EMMOD205 extension module is simply snapped onto the back of the A210, A220, A230 or
A230s power instrument and is supplied with power by the same. The basic instruments are
parameterised via keys on the device. Alternatively, EMMOD201 or EMMOD203 can be snapped on
first of all to enable programming via a PC and subsequently a change to EMMOD205 is made.
Technical data LONWORKS® Interface
Network protocol: LONTALK®
Transmission medium: Echelon FTT-10A Transceiver, transformer-coupled, reverse polarity
protected, twisted two-wire cable
Transmission speed: 78 kBit/s
Connections: Pluggable screw terminals
Article No. Description
156 639 Extension module EMMOD205 with synchronous input
156 647 Extension module EMMOD205 with digital output 125 V, connection to U160x of
Gossen-Metrawatt possible
For retrofitting. For mounted version see the respective basic instrument.
Further instruments with a LON interface
DME400, programmable multi-transducer with LON interface, see Page 24
A2000, multifunctional power transducer, see Page 33
39