scanora 5.0 dicom conformance statement - Soredex

SOREDEX
SCANORA 5.0
DICOM CONFORMANCE STATEMENT
The above table should be read as follows:
Module Name: The name of the associated module for supported worklist attributes.
Attribute Name: Attributes supported to build SCANORA Worklist Request Identifier.
Tag:
DICOM tag for this attribute.
VR:
DICOM VR for this attribute.
B: Matching keys in the Broad Query -mode. An "S" will indicate that
SCANORA will supply an attribute value for Single Value Matching,
an “R” will indicate Range Matching. Optional Matching keys are
indicated with "()".
I: Matching keys in the Interactive Query -mode.
R: Return keys. An "x" will indicate that SCANORA will supply this
attribute as Return Key with zero length for Universal Matching, if the
attribute was not used for Single Value Matching, Range Matching or
Wild Card Matching.
In the Broad Query mode:
— It can be configured whether “Scheduled Station AE Title” is additionally supplied and if Modality
is set to DX, PX, IO, CR, XC, CT or any user specified value.
— If more than one Modality value is defined, a C-FIND request is sent for each of them.
— The operator can furthermore filter the results of C-FIND query, locally, using these attributes:
• Patient Name
• Patient ID
• Accession Number
• Requested Procedure ID
• Scheduled Performing Physician’s Name
In the Interactive Query mode:
— If more than one Modality value is defined, a C-FIND request is sent for each of them.
For default values see chapter 4.4.2.
4.2.1.3.4 Activity – Query/Retrieve
4.2.1.3.4.1 Description and Sequencing of Activities
Typical sequence is depicted below.
29 / 55