Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
General Information & Configuration Memories<br />
Amplifier Setup<br />
The <strong>QSC</strong> DataPort-equipped amplifiers connected to the <strong>BASIS</strong> <strong>922uz</strong> must have their power switches in the “on” position. For initial<br />
testing, use the lowest useful gain setting until the system is operating as expected. After the system setup has been verified and<br />
tested, gain settings may be adjusted as required.<br />
Network<br />
The network should be operable and <strong>QSC</strong>ontrol.net software should be installed/running on the system controller computer.<br />
CobraNet Connection Loss<br />
If you are operating with a valid CobraNet network, and the connection to the network is disrupted, audio will momentarily mute, allowing<br />
the <strong>BASIS</strong> <strong>922uz</strong> to synchronize with its internal clock. If CobraNet network connection is re-established, the audio will mute again<br />
while the <strong>BASIS</strong> <strong>922uz</strong> synchronizes with CobraNet.<br />
Configuration Memories<br />
The <strong>BASIS</strong> <strong>922uz</strong> has non-volatile storage locations that contain settings for the device as well as DSP signal flow. The storage locations<br />
make it possible to set up the <strong>BASIS</strong> for different situations and quickly recall the setup with or without <strong>QSC</strong>ontrol.net software<br />
using the front panel controls.<br />
13
Change language