FlexFrame Specification Guide - Steelcase
FlexFrame Specification Guide - Steelcase
FlexFrame Specification Guide - Steelcase
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>FlexFrame</strong><br />
Shelves, Bins, and Drawers<br />
When skins are used the<br />
wire management cut-out<br />
will be concealed, but still<br />
usable for vertical routing<br />
cables behind skins.<br />
A space will always be<br />
present when shelves are in<br />
adjacent sections.<br />
Shelves, bins, and<br />
drawers are available as<br />
single lower, single upper,<br />
and double.<br />
Shelves are 1 1 /8" thick.<br />
Back edge of shelves<br />
is unfinished.<br />
Shelves, bins, and<br />
drawers ship knocked<br />
down and are assembled at<br />
installation.<br />
Bins and drawers do not<br />
lock.<br />
Sides of the bin and<br />
drawers are metal and finish<br />
must be specified.<br />
Bin doors recess into the<br />
case when opened.<br />
Bin doors have a soft<br />
close mechanism.<br />
.<br />
.<br />
Drawers come standard<br />
with two adjustable dividers<br />
that run the depth of the<br />
drawer.<br />
Drawers are wood construction<br />
and feature dovetail<br />
joinery.<br />
Drawers have full extension<br />
drawer slides.<br />
LED lights are available<br />
as an option on shelves,<br />
bins, and drawers. On<br />
double shelves lights are<br />
available on one or both<br />
shelves.<br />
The LED lights are flush<br />
mounted on the underside<br />
of the shelves, bins, or<br />
drawers.<br />
Lights ship installed in the<br />
shelves, bins, or drawers.<br />
A light kit must be specified<br />
with ordering LED lights.<br />
See Determining LED Light<br />
Wattage chart to determine<br />
the light kit needed, on page<br />
70.<br />
.<br />
Application Topics<br />
With skins<br />
Without skins<br />
Shelves, bins, and<br />
drawers can be applied<br />
with or without skins.<br />
If a single shelf is specified<br />
without skins, two fasteners<br />
will be visible on each<br />
blade.<br />
15 3 /8"<br />
14 1 /4"<br />
The opening height of<br />
a double shelf is slightly<br />
smaller than the opening of<br />
a single shelf placed above<br />
or below another shelf.<br />
.<br />
Shelves, bins, and<br />
drawers can be arranged<br />
to create a continuous<br />
vertical strip of painted metal<br />
blades.<br />
Shelves, bins, and<br />
drawers can be arranged<br />
to allow the frame verticals<br />
to be visible between<br />
components.<br />
Floor<br />
4 5 /16"<br />
The component installed<br />
at the bottom most position<br />
will have a minimum 4 5 /16"<br />
space between the bottom<br />
of the unit and the floor<br />
when the frame is installed<br />
1 3 /16" from the floor.<br />
.<br />
Do not stack shelves on<br />
top of each other so shelves<br />
are touching.<br />
Place shelves consistently<br />
on adjacent sections of the<br />
workwall to prevent misalignment<br />
across<br />
sections.<br />
Bins placed directly on top<br />
of each other will create a<br />
stacking appearance.<br />
.<br />
Shelves, Bins, and<br />
Drawers<br />
<strong>FlexFrame</strong> <strong>Specification</strong> <strong>Guide</strong> cShelves, Bins, and Drawers, continued 37<br />
November 2010
Change language