FlexFrame Specification Guide - Steelcase
FlexFrame Specification Guide - Steelcase
FlexFrame Specification Guide - Steelcase
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Specification</strong> <strong>Guide</strong>lines for Directional Fabrics<br />
<strong>Specification</strong> <strong>Guide</strong>lines for<br />
Directional Fabrics<br />
.<br />
66” Fabric<br />
Width<br />
One application direction of fabric on<br />
<strong>FlexFrame</strong> skins is warp horizontal. Standard<br />
<strong>Steelcase</strong> fabrics were designed for this<br />
application direction.<br />
Warp Direction<br />
Warp Direction<br />
66” Fabric<br />
Width<br />
The other application direction of<br />
fabrics on <strong>FlexFrame</strong> skins is warp vertical.<br />
This is most commonly used on COMs designed<br />
for warp vertical application.<br />
For more information about the warp<br />
direction of fabrics, see the Surface<br />
Materials Reference Manual.<br />
.<br />
.<br />
.<br />
Surface Materials<br />
<strong>FlexFrame</strong> <strong>Specification</strong> <strong>Guide</strong> 97<br />
November 2010
Change language