Spec Sheet - Christie Lites

Crosby . Forged Shackles
SCREW PIN
ROUND PIN
G-209 S-209
G-213 S-213
Screw pin anchor shackles
meet the performance
requirements of Federal
Specification RR-C-271D
Type IVA, Grade A, Class
2, except for those
provisions required of the
contractor.
Nominal
Size
(in.)
Working
Load
Limit*
(tons)
Round pin anchor shackles
meet the performance
requirements of Federal
Specification RR-C-271D
Type IVA, Grade A, Class
1, except for those
provisions required of the
contractor.
Dimensions
(in.)
Tolerance
A B C D F G H L M N P C A
5/8 3 1/4 1.06 .75 2.38 .63 1.69 2.94 4.19 .44 3.34 2.91 .69 .13 .06
' Furnished in screw pin only.
* NOTE: Maximum Proof Load is 2.2 times the Working Load Limit. Minimum Ultimate Strength is 6 times the
Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 64.
Nominal
Size
(in.)
Working
Load
Limit*
(tons)
G-209
Galv.
S-209
S.C.
Stock No.
G-213
S.C.
S-213
S.C.
G-209
S-209
Weight Each
(lbs.)
G-213
S-213
5/8 3 1/4 1018473 1018482 1018115 1018124 1.37 1.50
QUIC-CHECK
• Working Load Limit permanently shown on every shackle.
• Forged - Quenched and Tempered, with alloy pins.
• Capacities 1/3 thru 55 tons.
• Look for the Red Pin ... the mark of genuine Crosby quality.
• Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV,
Lloyds, or other certification. Charges for proof testing and certification available when requested at
the time of order.
• Hot Dip galvanized or Self Colored.

• Fatigue rated.