Professional ladders and towers for industry and trade
Professional ladders and towers for industry and trade
Professional ladders and towers for industry and trade
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MODULAR SYSTEM FOR CROSSINGS AND STAIRS<br />
Mobile plat<strong>for</strong>m steps<br />
Stair inclination 45°<br />
2231<br />
– Step width optionally 600, 800 or 1,000 mm.<br />
– H<strong>and</strong>rails on both sides as st<strong>and</strong>ard.<br />
– 1,100 mm high guardrail on the plat<strong>for</strong>m, with knee bar <strong>and</strong> toeboard.<br />
– Plat<strong>for</strong>m length 500 mm. Extension at intervals of 500 mm <strong>for</strong> aluminium profile<br />
steps <strong>and</strong> <strong>for</strong> grid plat<strong>for</strong>ms. Where aluminium chequer plate is used<br />
(step plate) intermediate sizes are possible.<br />
– Aluminium profile steps 250 mm deep, alternative steel or aluminium grid steps<br />
270 mm deep at additional cost on request.<br />
– Front or side exit on request.<br />
– Castors on steps section = 125 mm diameter castors with brakes.<br />
– Castors on support section = beam with 160 mm diameter fixed castor,<br />
(brake possible).<br />
– Overall step width including h<strong>and</strong>rail on both sides<br />
= step width + 150 mm.<br />
– Total load-bearing capacity 300 kg, step load 150 kg.<br />
– Shipped in subassemblies pre-assembled in the factory.<br />
– Low play castor bearings, there<strong>for</strong>e extremely stable.<br />
2231<br />
vertical height 1,100 mm<br />
plat<strong>for</strong>m<br />
length<br />
45°<br />
250<br />
210<br />
step width<br />
stabiliser width<br />
spread<br />
150
Change language